ページ1に含まれる内容の要旨
Harrier 41
CODES
410G, 412G, 413G
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 20.12.10 PART NUMBER: 111-3161 (C)
ページ2に含まれる内容の要旨
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 10 - Friction Disc 10 Specifications / Main Features 4 - Non-Grassed Areas 10 - Maintenance Schedule 10 Safety Precautions 5 - 6 - Safety Alert Symbol 5 Mower Maintenance 11 - 14 - Training 5 - Carburettor Adjustments 11 - Preparation 5 - Oil Service 11 - Safety Symbols 5 - Air Cleaner Service 11 - Operation 5 - 6 - Spark Plug Service 11 - Maintenance & Storage 6 - Keeping Engine Clean 11 - Control Sym
ページ3に含まれる内容の要旨
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perform- gives essential inform
ページ4に含まれる内容の要旨
SPECIFICATIONS / MAIN FEATURES Code 410 412 413 Engine Briggs & Stratton Briggs & Stratton Briggs & Stratton Engine type Series 650 Series 650 Series 650 Engine / Cutterbar Speed 2750 rpm 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Unleaded petrol Fuel capacity 1.5 litres 1.5 litres 1.5 litres Oil type SAE 30 engine oil SAE 30 engine oil SAE 30 engine oil Oil sump capacity 0.6 litres 0.6 litres 0.6 litres Cutting width 410mm 410mm 410mm 12 Cutting height 13 - 60mm 13 -
ページ5に含まれる内容の要旨
SAFETY PRECAUTIONS genuine Hayter replacement part. Safety Alert Symbol Preparation This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or Operation possibility of injury. Carefully read the following and wearing sandals. Do not operate the engine in a confined space where inform others. exhaust fumes (carbon monoxide) can collect. Tho
ページ6に含まれる内容の要旨
SAFETY PRECAUTIONS Operation cont Stop the engine and disconnect the spark plug lead: Allow the engine to cool before storing in any enclosure. Always ensure the blade has stopped, by releasing the - Before clearing blockages or unclogging the dis- engine stop lever, before tilting the mower for charge chute. To reduce the fire hazard, keep the engine and the transportation or crossing surfaces other than grass. - Before cleaning/checking or working on the ma- surrounding deck area free of
ページ7に含まれる内容の要旨
ASSEMBLING THE MOWER BEFORE FIRST USE The oil level is correct when it is at the full mark on Delivery Checklist Grassbag Assembly the dipstick. DO NOT OVERFILL. (Refer fig.5) Remove the mower from the packaging and check that Before first use assemble the grassbag and frame. Slide the following items have been supplied correctly. If any the frame (1) into the grassbag (2), ensuring that the han- items are missing contact, your local Hayter dealer. dle is above the grassbag as shown. Attach pl
ページ8に含まれる内容の要旨
OPERATING THE MOWER Only operate the lever with the engine running to prevent Controls Electric Start damage. Operate all control levers several times and ensure that (Code 412 only) the cables move freely. Check that the engine stop and Stand behind the mower and hold the handlebar together ground drive clutch levers return freely to their rest Reverse Travel with the engine stop lever. Turn the ignition key in a position when released. (Refer fig.7) Release the ground drive clutch lever
ページ9に含まれる内容の要旨
OPERATING THE MOWER Stopping Before Mowing To prevent accidents, thoroughly inspect the area (Code 413 only) and remove all objects which when contacted by the Release the ground drive clutch lever and release the mower cutterblade could become dangerous projec- engine stop lever. tiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health (Code 410 & 411) and safety or result in damage to the mower. Remem- Release the engine stop lever. ber the
ページ10に含まれる内容の要旨
OPERATING THE MOWER / MAINTENANCE SCHEDULE - Check the clutch cable adjustment. Heavy Growth Maintenance Schedule - Sharpen the cutterblade. Areas of heavy growth should be mown without Follow the hourly or calendar intervals, whichever occurs collecting the clippings. If collection is required, first first. More frequent service will be required if working for 50 Hours Or Every Season mow the area without the grassbag at the maximum prolonged periods under dusty, dry conditions, or when
ページ11に含まれる内容の要旨
MOWER MAINTENANCE the exhaust/exhaust guard, the air ways in the top cowl Carburettor Adjustments Air Cleaner Service and the surrounding deck areas on a daily basis after Should only be made by an authorised Briggs & Stratton To service the air cleaner, loosen screw (1) and remove use. Never spray the engine with water during cleaning. dealer. Under no circumstances should the engine be cover (2). (Refer fig.22) Water can contaminate the fuel. Always clean with a adjusted to run at a spe
ページ12に含まれる内容の要旨
MOWER MAINTENANCE The condition of the cutterblade and its mounting Securing Nuts & Bolts Lubrication arrangement should be checked regularly for signs of Regularly check that all securing nuts and bolts are tight. Lubricate the wheels, pivot points and linkages with wear or damage. Ensure that the cutterblade is not bent Replace missing or damaged items immediately. engine oil every 25 operating hours. or cracked. Apply a good quality medium grease to the inner control cables at the point
ページ13に含まれる内容の要旨
MOWER MAINTENANCE Engines stored in excess of 30 days need to be protected repellent anti-corrosion product. Cutterblade Sharpening with Briggs & Stratton fuel additive or drained of fuel to A slightly worn cutterblade may be re-sharpened. Both prevent gum from forming in the fuel system or on essen- - Cover the mower with a protective sheet and store it in blade edges must be sharpened equally to ensure balance. tial carburettor parts. To ensure your mower is maintained a dry, ventilated
ページ14に含まれる内容の要旨
MOWER MAINTENANCE - Disconnect the battery lead from the charger and then Battery Charging connect the battery lead to the mower lead. (c) The consumer has a critical role in returning waste (Code 412 only) electronic/electrical equipment for recycling and disposal. - PREVENT ACCIDENTS: ALWAYS charge the IMPORTANT - PREVENT DAMAGE: NEVER battery in a well ventilated area. connect the battery charger to the engine lead as this (d) Recycling keeps these products out of the municipal will
ページ15に含まれる内容の要旨
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. mowing is important this month as the combined action waterlogged. keeps runners of clover under control. Wat
ページ16に含まれる内容の要旨
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Discharge chute blocks 1. Grass is wet 1. Mow dry grass 1. Engine stop lever released 1. Operate engine stop lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2. Incorrect oil level 2. Check oil level 3. Grassbag full 3. Empty grassbag over 3. Obstruction under deck 3. Remove obstruction 4. Airflow through the grassbag 4. Clean the grassbag 4. Battery discharged (if fitted) 4. Charge batte
ページ17に含まれる内容の要旨
NOTES WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty regis
ページ18に含まれる内容の要旨
NOTES NOTES 18 19
ページ19に含まれる内容の要旨
NOTES NOTES 18 19
ページ20に含まれる内容の要旨
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify that this serv
