ページ1に含まれる内容の要旨
Models
22” Self-Propelled
This Instruction Book contains information for several models.
Read and keep this book for future reference.
This book contains important information on
SAFETY, ASSEMBLY, OPERATION, AND MAINTENANCE.
PRODUCT INFORMATION
The owner must be certain that all
the product information is included with the unit.
This information includes
the INSTRUCTION BOOKS,
the REPLACEMENT PARTS and the WARRANTIES.
This information must be included to make sure state laws
and other laws are
ページ2に含まれる内容の要旨
MURRAY, INC. Two Year Limited Warranty Murray, Inc. warrants to the original purchaser that this unit shall be free from defects in ma- terial and workmanship under normal use and service for a period of Two (2) Years from the date of purchase; however, this warranty does not cover engines, accessories (such as snow blowers, snow blades, grass baggers and plows), transmissions, batteries and Nor- mal Wear Parts (except as noted below) or transaxles as the companies that manufacture these items f
ページ3に含まれる内容の要旨
OWNER’S INFORMATION This instruction book is written for a person with some mechanical ability. Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit. Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the lo
ページ4に含まれる内容の要旨
IMPORTANT Safe Operation Practices for Walk-Behind Mowers. This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. I. General Operation tion which can cause drowsiness or affect your ability to operate this machine safely. 1. Read, understand, and follow all instruc- 15. Never operate mower in wet grass. Always tions on the machine and in the manual(s). be sure of your footi
ページ5に含まれる内容の要旨
IMPORTANT DO NOT: nect the spark plug wire, and keep the wire away from the plug to prevent accidental Do not mow near drop-offs, ditches, or em- starting. Always wear eye protection when bankments. The operator could lose footing you make adjustments or repairs. or balance. 4. Keep all nuts and bolts, especially blade at- Do not mow excessively steep slopes. tachment bolts, tight and keep equipment in Do not mow on wet grass. Reduced footing good condition. could cause slipping. 5. Never tamper
ページ6に含まれる内容の要旨
SAFE MOWING GUIDE Every person who uses power equipment gency. Learn how to cut and how to keep con- must learn the difference between proper and trol of the mower at all times. improper use, safe and unsafe mowing prac- Many mowers are started manually. When us- tices. Read the next few pages carefully. ing a pull start or rope start, place your feet They can help you learn. Too often the mow- firmly and away from the blade. Hold the rope er user is inexperienced, not properly in- handle secure
ページ7に含まれる内容の要旨
SAFE MOWING GUIDE bruises, or even put out an eye. Often the per- improve the performance, help the engine stay son hurt by a thrown object is a bystander such cooler, extend the life of moving parts, and as a child, another family member or a neigh- minimize the danger of fire. People get burned bor. Keep people and pets completely away working with and around their mowers for oth- from the mowing area. Direct the mower’s dis- er reasons than fire and explosions. It takes charge away from areas
ページ8に含まれる内容の要旨
SAFE MOWING GUIDE Use only original equipment or approved sub- in the rain is no fun and it is dangerous. Always stitutions as service parts. If you need profes- seek shelter in an electrical storm. In extreme- sional service, select a shop that is an ly dry mowing conditions, your safety glasses can serve a dual purpose by protecting your Authorized Service Center for your brand of mower. If you plan to service the unit yourself, eyes from dust and thrown objects, also a dust follow directions
ページ9に含まれる内容の要旨
SAFE MOWING GUIDE While mowing, if you hit a foreign object, stop position when mowing and bagging. When the engine. Remove the spark plug wire. Care- bagging, slower ground speed will provide the fully and thoroughly inspect the mower for best results. damage. Make necessary repairs before re- Change the mowing pattern slightly each time starting. If the unit starts to vibrate abnormally, you cut. If you always cut the same way, the stop the engine immediately and check for the grass will devel
ページ10に含まれる内容の要旨
STEPS TO FOLLOW BEFORE MOWING Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes. Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. Fill the fuel tank outside. Clean off spilled fuel. Read and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others. Exhaust fumes are dangerous. Sta
ページ11に含まれる内容の要旨
PREPARATION UNPACKING INSTRUCTIONS The mower was fully assembled at the factory. Upper Handle When the mower was put in the carton, the handle was put in the storage position. To put the handle in the operating position, follow the steps below. Knob Lower Handle Handle 1. Remove the mower from the carton. Knob 2. Put the lower handle in the operating posi- tion. Make sure the lower handle is be- tween the locking tabs (Figure 1). Figure 1 3. Put the upper handle in the operating position. Tighte
ページ12に含まれる内容の要旨
PREPARATION HOW TO ADJUST THE HANDLE HEIGHT Upper Handle The handle bracket has two assembly posi- tions. A HIGH and a LOW position (Figure 3). The HIGH position will raise the handle ap- proximately four inches. Knob Lower Handle HIGH Bolt LOW Knob Handle Bracket ÇÇ ÇÇ Figure 3 Figure 4 1. Remove the knobs and bolts from the HIGH Position right and left handle brackets (Figure 4). Handle Bracket 2. To raise the handle, mount the lower han- dle in the HIGH position shown in Figure 5. 3. To lowe
ページ13に含まれる内容の要旨
PREPARATION MODELS WITH OPTIONAL GRASS BAG HOW TO ASSEMBLE THE GRASS BAG Support Tube 1. Slide the frame assembly into the ends of the support tube (Figure 7). Frame Assembly Figure 7 2. Make sure the handle is on the outside of Handle the grass bag (Figure 8). Frame Assembly Clips 3. Attach the clips to the frame assembly Figure 8 (Figure 8). Top Cover 4. Close the top cover. When operating the mower with the grass bag, the top cover must be in the closed operating position (Figure 9). Figure
ページ14に含まれる内容の要旨
PREPARATION MODELS WITH OPTIONAL GRASS BAG IMPORTANT: Make sure the hooks, on each HOW TO MOUNT side of the frame assembly, are mounted THE GRASS BAG on the pivot rod. 1. To mount the grass bag on the mower, WARNING: Do not use the grass raise the rear door. Hold the handle of the bag unless the cover is in the op- grass bag. Put the grass bag in the erating postion. operating position (Figure 10). Lower the rear door. Handle Rear Door Mount Frame Hooks To Pivot Rod Handle Bracket Figure 10 HOW
ページ15に含まれる内容の要旨
PREPARATION HOW TO ATTACH THE SIDE MOUNTED Mulcher Cover DISCHARGE DEFLECTOR WARNING: To prevent the en- gine from starting, disconnect the wire from the spark plug. 1. Raise the mulcher cover (Figure 12). 2. Slide the two tabs on the side deflector un- der the pivot pin. 3. Lower the side deflector. Make sure the locking tab goes through the slot in the side deflector (Figure 13). Side Deflector Locking Tab 4. Lower the mulcher cover (Figure 14). Figure 13 Mulcher Cover Mulcher Cover Side Defle
ページ16に含まれる内容の要旨
PREPARATION ELECTRIC START MODELS When the mower was shipped from the facto- ry, the battery was not fully charged. Before the first use, the battery must be charged for 16 hours. See “How To Charge The Battery” in the Maintenance section. ENGINE TIPPING HOW TO PREPARE THE ENGINE ENGINE DOES NOT CONTAIN When you service the engine, inspect the OIL OR GASOLINE blade, or clean the underside of the mower See the engine manufacturer’s instructions for housing; make sure to always tip the engine the
ページ17に含まれる内容の要旨
OPERATION ENGINE STOP LEVER WARNING: For safe operation, the drive system must immedi- Release the engine stop lever and the engine ately disengage when the drive lever is released. If the drive and the blade will automatically stop. To run system does not disengage the engine, hold the engine stop lever in the correctly, do not operate the Operating position (Figure 17). mower until the drive system is adjusted or repaired by an Before you start the engine, operate the en- authorized service ce
ページ18に含まれる内容の要旨
OPERATION WARNING: To prevent an acci- HOW TO START ENGINE dent, make sure the drive lever is WARNING: The blade will rotate in the DISENGAGED position. when the engine runs. When the drive lever is in the EN- GAGED position, do not start the IMPORTANT: Before you start the engine, engine. operate the engine stop lever several 6. Some models have a primer button on the times. Make sure the engine stop cable front or side of the engine (Figure 19). Ev- moves freely. ery time you push the primer b
ページ19に含まれる内容の要旨
MAINTENANCE 4. Charge the battery for 16 hours. ELECTRIC START MODELS 5. Disconnect the battery charger from the HOW TO CHARGE THE BATTERY electrical outlet and from the battery. WARNING: The battery contains 6. Align the two tabs on the bottom of the bat- sulfuric acid which is harmful to tery case with the two holes in the battery the skin, eyes and clothing. If bracket. Rotate the battery case until the acid gets on the body or cloth- quick release locks the battery in the OP- ing, wash with
ページ20に含まれる内容の要旨
MAINTENANCE ENGINE MAINTENANCE Use the following maintenance section to keep Hard starting. your unit in good operating condition. All the Engine smoking. maintenance information for the engine is in Spark plug fouling. the “Engine Instruction Book”. Before you start Oil or gas saturation of the air filter. the engine, read this book. WARNING: Before you make an inspection, adjustment (except carburetor), or repair, stop the engine and disconnect the wire from the spark plug. ENGINE TIP
