Snapper 4-6814の取扱説明書

ページ1に含まれる内容の要旨

DEALER SET-UP INSTRUCTIONS & CHECKLIST for SNAPPER
26" HIGH WHEEL MOWERS

This SNAPPER High Wheel Mower is equipped with a Blade Brake Clutch (BBC). This allows the machine to be
started and operated with the blade disengaged (OFF). Releasing the blade control on this machine STOPS only
the blade. The engine continues to run. The engine is stopped by moving the engine speed control to STOP
position. These mowers are designed for quick set-up. The checklist should be filled out by the deale

ページ2に含まれる内容の要旨

Blade Control Spring 1/4” To 3/8” Extended FIGURE 3 STEP 9: Check adjustment of wheel drive control spring. With the wheel drive control lever in the "OFF/Released” position measure the length of the wheel drive control spring. Move the wheel drive control lever to the "ON" position and measure spring length. The spring should extend 1/2" to 3/4" from its original length. WARNING Engine must be OFF for this adjustment.

ページ3に含まれる内容の要旨

NOTES ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _____________

ページ4に含まれる内容の要旨

DEALER SET-UP & CHECKLIST for SNAPPER 26” HIGH WHEEL MOWERS The following must be achieved upon the purchase of the mower. It is very important that the Dealer performs and accomplishes the set-up and the operational tests as listed below. SET-UP (Details on Pages 1 & 2 of this Instruction) _____ FOAM SHIPPING BLOCK removed from cutting blade. _____ UPPER HANDLE & LOWER HANDLE secured in place and hardware tightened securely. _____ SIDE CHUTE installed on mower. _____ BLADE retaini