Snapper 60943の取扱説明書

ページ1に含まれる内容の要旨

#6-0943 SINGLE BAG GRASS CATCHER KIT for
28" & 33" REAR ENGINE RIDERS AND LAWN TRACTORS

This Single Bag Grass Catcher Kit fits SNAPPER 28” & 33” Rear Engine Riders. It also fits SNAPPER Tractors
provided the tractor is equipped with the rear mount adapter kit & has 33" mower. Kit #6-1068 is required for
the Disc & Hydro Drive Lawn Tractors series 0, 1 & 2. Kit #6-0875 is required for Yard & Garden Tractors series.
Kit #6-1334 is required for Tractors series "A", "B", "C" & "D".

WARNING

ページ2に含まれる内容の要旨

C. ADAPTER INSTALLATION Loosen bolts (see Figure 2C) & bump the adapter, if Hold the adapter in front of the deck. Align the adapter necessary, to force the lugs under the lug retainers. lugs with the hinge lug retainers, and then push the Secure the adapter to the deck with a flat washer and adapter to the rear. wing nut. Tighten bolts. See Figure 2C. 33” DECK HINGE LUG RETAINERS RETIGHTEN LOOSEN BOLTS BOLTS IF NECESSARY ADAPTER LUGS FLAT WASHER WING NUT ADAPTER SHOWN BOLT IN

ページ3に含まれる内容の要旨

STEP 4: GRASS BAG INSTALLATION Move the latch aside, then slide the grass bag into the frame with open mesh to the rear of the mower. Secure bag with latch. See Figure 4. OPEN MESH SIDE TO REAR OF BAG SUPPORT ROD MOWER AWAY COVER/FRAME FROM ENGINE ASSEMBLY BAG ROD ON TOP OF BAG SUPPORT ROD MOVE LATCH ASIDE TO INSTALL BAG FIGURE 4 STEP 5: GRASS TUBE INSTALLATION A. Slide upper end of grass tube into opening of cover/frame structure. B. Slide lower end of grass tube over ad

ページ4に含まれる内容の要旨

SINGLE BAG GRASS CATCHER ILLUSTRATION 4

ページ5に含まれる内容の要旨

SINGLE BAG GRASS CATCHER ILLUSTRATION (Continued) 5

ページ6に含まれる内容の要旨

SINGLE BAG GRASS CATCHER PARTS LIST ITEM PART NO. DESCRIPTION 1 5-1948 TOP, Container 2 1-6108 SKIRT, Dust 3 2-9840 WASHER, Faceted (5) 4 4-7973 FRAME, Grass Bag 5 2-9841 CLEVIS PIN, 5/16 x 1-11/16 (2) 6 3-1725 LATCH, Grass Catcher 7 9-0532 SCREW, 10-32 x 1-11/16 Hex Cap 8 9-0376 NUT, 10-32 Hex Lock w/Nylon Insert 9 3-7758 ROD, Bag 10 9-1503 PIN, 3/32 x 1-1/2 Hair (2) 11 1-2556 CONNECTOR, 1/2 x 3” Rod 12 1-9251 BAG, Single Zipperless 13 1-9912 ADAPTER, B