Perlick Z2148の取扱説明書

ページ1に含まれる内容の要旨

Troubleshooting
OPERATING INSTRUCTIONS
SMART COUPLER with Empty Keg Sensor
Problem: Beer flow is slower with Smart Coupler
than with standard Perlick coupler.
Part No.
Probable Cause: Beer Flow Control Handle is in CLEAN position.
Solution: Slowly turn Beer Flow Control Handle to ON position.
26000F
Problem: Beer does not flow after keg is tapped.
The Smart Coupler* combines a
standard Perlick single-valve keg
Probable Cause: Smart Coupler has locked up.
coupler with a specially-designed
Solu

ページ2に含まれる内容の要旨

TAPPING and CLEANING PROCEDURES REPLACEMENT PARTS Filling the Lines the First Time Beer Flow Control Handle Operating 1. Turn Beer Flow Control Handle OFF. (See Fig. 1). 1 Positions 2. Tap fresh keg. 3. Turn Beer Flow Control Handle to CLEAN. (See Fig. 3). 4. Open the beer faucet. When solid beer appears, close the faucet. The line is full. 7 5. Turn Beer Flow Control Handle ON. (See 8 2 Fig.2). The line is full and ready for service. When Tapping Fresh Kegs 1. Remove coupler from empty keg.