ページ1に含まれる内容の要旨
Operator’s Manual
21” Steel Deck Walk Mowers
Series 20
Model No.
7800841-01
7800842-01
7800845-01
!
7105342
Rev. D
en fr
Not for
Reproduction
ページ2に含まれる内容の要旨
Thank You for purchasing this quality-built Snapper mower. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper mower will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of established lawns and is not
ページ3に含まれる内容の要旨
Table of Contents Operator Safety ................................................................................................4 Features and Controls ...................................................................................10 Operation ........................................................................................................11 Before Starting ...........................................................................................11 Oil Recommendations .............
ページ4に含まれる内容の要旨
Operator Safety Operating Safety Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are responsible for your safety and that of those around you. Use common sense, and think through what you are doing. If you are not sure that the task you are about to perform can be safely done with the equipment you have chosen, ask a professional: contact your local authorized dealer. Read the Manual The operator’s manual contains
ページ5に含まれる内容の要旨
Operator Safety Moving Parts This equipment has moving parts that can injure you or someone else. However, if you stand behind the handle properly and follow all the rules in this book, the unit is safe to operate. The mower deck has a spinning mower blade that can amputate hands and feet. Do not allow anyone near the equipment while it is running! To help you, the operator, use this equipment safely, it is equipped with an operator present safety system. Do NOT attempt to alter or bypass the sy
ページ6に含まれる内容の要旨
Operator Safety WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects ! that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body an
ページ7に含まれる内容の要旨
Operator Safety Disconnect and secure spark plug wire away from plug SAFE HANDLING OF GASOLINE to prevent accidental starting. To avoid personal injury or property damage, use extreme 12. STOP engine and wait until the blade comes to com- care in handling gasoline. Gasoline is extremely flammable plete STOP before removing grass bag and/or clearing and the vapors are explosive. grass. 1. Extinguish all cigarettes, cigars, pipes and other sources 13. DO NOT operate mower without the entire
ページ8に含まれる内容の要旨
Operator Safety The decals noted below are located on the mower. Safety and Operation Decals The safety warnings and operation instructions they Reading this manual and the safety instructions it con- contain should be carefully read, understood, and fol- tains will provide the basic knowledge necessary to lowed. Not following these important warnings and operate this mower safely and effectively. However, instructions can result in serious bodily injury or several safety and operation dec
ページ9に含まれる内容の要旨
Operator Safety Explanation of Safety Decals WARNING WARNING Guard or entire grass catcher must AVOID SERIOUS INJURY OR DEATH D be installed before operating mower. Read operator’s manual. Keep safety devices (guards, shields, switches, AVERTISSEMENT etc.) in place and working. A C Go across slopes, not up or down. La protection ou le sac de ramassage Remove objects that could be thrown by blade. doivent être installés avant de Do not mow when children or others are around. Look down and behi
ページ10に含まれる内容の要旨
Features and Controls IMPORTANT The figures and illustrations in this manual are pro- vided for reference only and may differ from your F specific model. Contact your dealer if you have ques- G tions. H E D I C B A J A. Mulching Cover F. Drive Control B. Rear Height Adjustment Latch (2) G. Blade Control C. Fuel Filler Cap H. Ground Speed Control D. Rope Start Handle I. Oil Fill Cap and Dipstick E. Engine Speed Control J. Front Height Adjustment Latch (2) 10 www.snapper.com Not for Reproduc
ページ11に含まれる内容の要旨
Operation 6. Add fuel to the tank: Before Starting • Make sure the mower is outside, where fumes 1. Check the guards, deflectors, grass bag, and cov- can safely dissipate. ers to make sure all are in place and securely tight- • Remove the fuel fill cap (C, Figure 2). ened. • Fill the tank with fuel. Refer to the section entitled 2. Check the blade control (A, Figure 1), drive con- ‘Fuel Recommendations’. To allow for expansion trol (B), and ground speed control (C) to insure of the fuel,
ページ12に含まれる内容の要旨
Operation The engine on your mower is equipped with the Briggs Fuel Recommendations TM & Stratton Ready Start System. This features a Fuel must meet these requirements: temperature-controlled automatic choke. No additional • Clean, fresh, unleaded gasoline. steps are required to start a cold engine. • A minimum of 87 octane/87 AKI (91 RON). High 1. Move the engine speed control (A, Figure 3) to altitude use, see below. the fast (‘Rabbit’) position. • Gasoline with up to 10% ethanol (g
ページ13に含まれる内容の要旨
Operation Stopping the Mower Cutting Height Adjustment 1. Stop forward motion of the mower by releasing the wheel drive control. ! WARNING ! 2. Stop the engine and blade by releasing the blade DO NOT attempt any maintenance, adjustments or control. service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are Handle Height Adjustment HOT. Avoid serious burns, allow sufficient time for all components
ページ14に含まれる内容の要旨
Operation Mulching Operation Installing the Discharge For best mulching results, cut up to a maximum of 1/3 Deflector of grass blade length and recycle ONLY when grass is dry. ! WARNING 1. Set all wheels in the highest cutting position (Notch ! DO NOT attempt any maintenance, adjustments or 7). Refer to the Section entitled “Cutting Height service with engine and blade running. STOP engine Adjustment”. and blade. Disconnect spark plug wire and secure 2. Move the engine speed control to th
ページ15に含まれる内容の要旨
Operation Installing the Grass Bag Installing the Mulching Plug (Optional Accessory on Some Models) Adapter (Optional Accessory on Some Models) ! ! WARNING DO NOT attempt any maintenance, adjustments or ! WARNING ! service with engine and blade running. STOP engine DO NOT attempt any maintenance, adjustments or and blade. Disconnect spark plug wire and secure service with engine and blade running. STOP engine away from spark plug. Engine and components are and blade. Disconnect spark plug
ページ16に含まれる内容の要旨
Operation Installing the Grass Bag (Optional Accessory on Some Models) ! ! WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 1. Install the grass bag adapter. Refer to the Section entitled “Installing the Grass Bag Adapter”. 2. Install the grass bag by sliding
ページ17に含まれる内容の要旨
Maintenance Maintenance Chart Emissions Control ! WARNING ! Maintenance, replacement, or repair of the emissions DO NOT attempt any maintenance, adjustments or control devices and systems may be performed by any service with engine and blade running. STOP engine non-road engine repair establishment or individual. and blade. Disconnect spark plug wire and secure However, to obtain “no charge” emissions control ser- away from spark plug. Engine and components are vice, the work must be perf
ページ18に含まれる内容の要旨
Maintenance Change Engine Oil Service Air Filter WARNING ! WARNING ! ! ! Never start or run the engine with the air cleaner DO NOT attempt any maintenance, adjustments or assembly (if equipped) or the air filter (if equipped) service with engine and blade running. STOP engine removed. and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are NOTE: Do not use pressurized air or solvents to clean HOT. Avoid serious burns, allow sufficient time for all
ページ19に含まれる内容の要旨
Maintenance 3. Use a brush or compressed air to remove loose Check Safety Interlock System debris, then use a damp cloth to wipe down the 1. Start the mower. unit. 2. Release the blade control. The engine must stop 4. Tilt the mower up on its rear wheels and inspect within 3 seconds. the underside of the deck. (Do not tilt the mower If the engine does not stop within 3 seconds, do not with the spark plug or carburetor down.) Scrape use the mower. Bring the mower to an authorized away
ページ20に含まれる内容の要旨
Maintenance 3. Reinstall the transmission plug. Service 4. Check the grease level after each 25 hours of operation. ! WARNING ! DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine Check Mower Blade and blade. Disconnect spark plug wire and secure 1. Disconnect the spark plug wire and secure the end away from spark plug. Engine and components are away from the plug. HOT. Avoid serious burns, allow sufficient time for all 2. Tilt the mower up on it
