ページ1に含まれる内容の要旨
WHYNTER Stainless Steel Hot & Cold Water Dispenser
MODEL# : FX-7SB/W
Instruction Manual
Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before
using product to ensure proper use. Keep this manual in a safe place for future reference.
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Safety Instructions……………………………...3 Safety Precautions………………………….3 Grounding Instructions……………………..3 Proper Disposal of the Dispenser…………4 Parts Overview……………………………..........4 Proper Installation and Location…………......5 Prior to First Time Use………………………....5 Loading the Dispenser………………………....5-6 Using the Hot Water Tap…………………….... 6 Specifications…………………………………....6 Cleaning and Caring for the Dispenser ….....6 Cleaning the Dispenser Cabinet…
ページ3に含まれる内容の要旨
SAFETY INSTRUCTION WARNING! Use this appliance only for its intended purpose as described in this Owner’s Manual. SAFETY PRECAUTIONS When using electrical appliances, basic safety precautions should be followed, including the following: This water dispenser must be properly installed and Do not plug in the power cord or turn on the power located in accordance with these instructions before switches when the water dispenser is empty. it is used. Never turn the water dispenser up
ページ4に含まれる内容の要旨
PROPER DISPOSAL OF A WATER DISPENSER CFC DISPOSAL of your old water dispenser unit. Your Whynter Water Dispenser does not utilize CFCs. Your old water dispenser may contain a cooling system that used CFC’s (chlorofluorocarbons). CFC’s are believed to harm stratospheric ozone. If you are throwing away your old dispenser, make sure the CFC refrigerant is removed for proper disposal by a qualified service person. If you intentionally release this CFC refrigerant you can be subject to fines a
ページ5に含まれる内容の要旨
PROPER INSTALLATION AND LOCATION The rear of the water dispenser should be at LOCATION least 10 inches / 25 centimeters from the wall to The water dispenser should be installed in an allow for proper air circulation environment where the temperature ranges Never place the water dispenser on carpet, foam between 10ºC/ 50ºF and 33ºC / 90ºF. Relative or any other unstable surface humidity should not be higher than 90% Do not place flammable items near the water Avoid direct su
ページ6に含まれる内容の要旨
cooling LED indicator turns on and the cooling system starts. When the cold water reaches a 6. Allow 40 minutes for water to reach the set hot and temperature of approx. 8ºC / 46ºF, the green light cold temperatures. goes off and the cooling system stops working. The machine turns to keeping cool mode. When Contact a local water bottle distributor to the cold water temperature rises to 10ºC / 50ºF purchase water bottles. degree, the cooling system will automatically resumes. USIN
ページ7に含まれる内容の要旨
5 After about one hour, press the hot & cold buttons until no more water comes out of the taps. IMPORTANT: Before use, dispense at least one quart of water from each tap to make sure the cleaning solution is completely removed. Draining the Dispenser IMPORTANT: Put both power switches to the OFF position and UNPLUG the water dispenser before draining. Allow the dispenser to cool overnight before draining to reduce the risk of scalding The dispenser should
ページ8に含まれる内容の要旨
TROUBLESHOOTING TIPS Please check the following troubleshooting tips before calling the customer service line or having the machine repaired. Problem Possible Causes What To Do Water not hot enough or Dispenser is unplugged Push the power plug completely into the outlet cold enough and make sure that the applicable switches are set to the ON position The circuit breaker has been tripped Reset the circuit breaker All the water in the water tank has Wait 1 hour for the dispenser to
ページ9に含まれる内容の要旨
ONE YEAR LIMITED WARRANTY This WHYNTER water dispenser is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. Should your WHYNTER water dispenser prove defective within one year from the date of purchase, return the defective part or unit, freight prepaid (within two months of purchase; after two months to one year, customer will be responsible for freight cost
