ページ1に含まれる内容の要旨
VOLVO MOTOR GRADER
G726B
ALL WHEEL DRIVE
• Configuration: Articulated frame • Single lever “Smart Shifter” transmission • 8400 fully sequential direct drive powershift
control with gear memory feature transmission
• Engine model: Volvo D7DGDE2
• Separate hydraulic pump & speed sensor • Choice of fully enclosed, ROPS cab in full
• Maximum net engine output
for each front wheel height or low profile configuration, or
@2200 RPM (per SAE J1349):
ROPS canopy
• Variable aggression for job matching
19
ページ2に含まれる内容の要旨
Base operating weight Engine performance curve (Standard equipment) torque vs. engine speed Weights shown include full cab with ROPS, all 800 1200 operating fluids and operator. 1100 720 G726B 1000 640 Total . . . . . . . . . . . . . . . . . . . 35,400 lb (16 057 kg) 900 560 On front wheels . . . . . . . . . . 10,266 lb (4 657 kg) 800 480 On rear wheels. . . . . . . . . . . 25,134 lb (11 401 kg) 700 Weight adjustments for various options are 400 600 listed. 500 320 400 Typically equipped opera
ページ3に含まれる内容の要旨
All Wheel Drive All Wheel Drive Front axle (continued) (continued) Type: Fully welded steel truss, gusseted for in all tractive conditions. When AWD is Volvo AWD motors maintain maximum torsional strength, oscillates on a single 3.5” selected, the engine will deliver maximum VHP efficiency in both forward and reverse. (89 mm) diameter center pivot pin. horsepower regardless of the working gear Operating modes being used. Wheel lean. . . . . . . . . . . . . . . . . . . . . . . . . 15º R & L All W
ページ4に含まれる内容の要旨
Steering Circle drive Cab & controls Hydrostatic power front wheel steering The Volvo dual cylinder Circle Drive System All controls are located in a 90° arc forward incorporating two steering cylinders. Meets uses direct acting hydraulic power for and to the right of the operator. Located SAE J1511 OCT. 90 with optional secondary exceptional turning and holding capability forward of the operator are the engine oil steering. under full load. Circle Drive System uses pressure, coolant temperature
ページ5に含まれる内容の要旨
Load sensing hydraulics Capacities Closed Center Hydraulic System senses load U.S.Gal. Imp.Gal. Litres requirements and maintains system pressure Fuel tank . . . . . . . . . . 100.0 . . . . . 83.3. . . . . 378.5 350 psi (24 Bar) above the load pressure. Transmission . . . . . . . . 10.0 . . . . . . 8.4. . . . . . 38.0 Final drive. . . . . . . . . . . . 6.0 . . . . . . 5.0. . . . . . 23.0 System features industry standard control Tandems (each) . . . . . . 26.4 . . . . . 22.0. . . . . 100.0 arran
ページ6に含まれる内容の要旨
STANDARD FEATURES Volvo “High Torque” All Wheel Drive with hydrostatic Hardened circle teeth cut on outside of circle for Suspension seat Creep feature maximum turning power 100 U.S. gallon (378.5 l) fuel tank capacity Operator controlled, lock/unlock differential final Hardened circle drive pinions for maximum wear Dual leaning wheel cylinders drive resistance DURAMIDE™ wear strips on circle clamp plates and 4 wheel, crossover, dual braking system with reserve Isolation mounted cab, transmissio
