Ariens 992203の取扱説明書

ページ1に含まれる内容の要旨

Date: 7/19/2013 No. N-2036
Product Notice
Ariens Company
655 W. Ryan St.
Brillion, WI 54110
www.ariens.com
Product Family: Pro-Turn 200 & 400 Series Mowers
Subject: ZT-5400 Transaxle
Dealer Action: Inspect and Repair as Necessary
Ariens Company has received the attached information from Hydro-Gear. This is an instruction sheet for
inspecting and, if necessary, correcting a hardware problem on the ZT-5400 transaxles used on PT-200 and
PT-400 series commercial mowers.
Models and serial numbe

ページ2に含まれる内容の要旨

Instruction Sheet SUBJECT: Improperly Assembled ZT-5400 Bypass It has come to Hydro-Gear’s attention that the bypass on some ZT-5400s may be assembled incorrectly. This can cause the transaxle to malfunction. Inspect the order of the transaxles by- pass components. A correctly assembled bypass will have the seal, bypass rod, flat washer, wave washer and retaining ring installed in that order (see Figure 1). For example there have been reports of the bypass assembled incorrectly with the f