ページ1に含まれる内容の要旨
Wireless Sensor
00972 INST0518-06
Instruction Manual
Wireless Weather Station
& Atomic Clock
MODEL # 00972
Wireless Sensor
Main Unit
THERMO HYGRO
with low
temperature
adaptor
Thank You! We appreciate you for purchasing the new generation radio-controlled
wireless weather station and atomic clock. This instrument is designed and engineered
with state-of-the-art technology and components. It will provide these accurate and
reliable measurements: date, time, and indoor/outdoor temperatures and h
ページ2に含まれる内容の要旨
3 INSTALL BATTERIES Main Unit: Always install batteries into the main unit first. On the back of the unit, Main Unit remove the battery compartment cover. Insert 2 AA alkaline (or lithium – See NOTES BACK below) batteries. Replace the cover. 1 Wireless Sensor: After batteries have been put into the main unit, remove the 4 screws to remove the back cover of the wireless sensor. Insert 2 AA alkaline (or lithium) batteries. Press the “TX” button and replace the back cover and the 4 screws on t
ページ3に含まれる内容の要旨
MAIN UNIT FUNCTION BUTTONS Using the included LOW TEMPERATURE ADAPTOR The wireless sensor will operate normally down to -4 ºF. Below -4 ºF, the electronics may operate erratically or become non-functional until the temperature raises again. In case temperatures fall below -4ºF, bring the wireless sensor indoors and use the included low temperature adaptor by running the wire out through a soft seal opening such as a window or door. When routing the wire for the low temperature adaptor, make cer
ページ4に含まれる内容の要旨
6 UNDERSTAND WHAT THE BUTTONS DO. 7 MAIN UNIT FEATURES PRESS & HOLD Radio-controlled Clock : The unit starts synchronizing the clock after the 1st channel BUTTON NAME PRESS & RELEASE FOR 3 SECONDS of the wireless sensor begins to send its information to the main unit. (This is called registration.) The built-in antenna receives the official time signal from the US choose channel 1,2, clears the current CH (CHANNEL) Government's National Institute of Standards and Technology. A microchip tran
ページ5に含まれる内容の要旨
Moon Phase: 8 MULTIPLE WIRELESS SENSORS The moon phase will automatically display based on the calender date. The moon phase display will scroll from left to right, and pause for about 5 seconds to display the current The main unit supports up to three wireless sensors. Each additional wireless sensor moon phase. NOTE: the moon phase will not be correct unless the date and year are must be designated a different channel number. Assigning different channel numbers programmed correctly. diffe
