ページ1に含まれる内容の要旨
NX Wireless Wind
transducer set
Installation and Operation Manual
English
ページ2に含まれる内容の要旨
NX Wind transducer set English 1
ページ3に含まれる内容の要旨
English NX Wind transducer set Edition: April 2007 2
ページ4に含まれる内容の要旨
NX Wind transducer set English Mounting instruction Tri-transducer 1 Installation ........................................................................................................4 1.1 Location............................................................................................................4 2 Part specification..............................................................................................4 3 Mounting in the mast head ...............................
ページ5に含まれる内容の要旨
English NX Wind transducer set NX Wireless Wind transducer Installation Manual Thank you for choosing a Nexus product. Through this manual we would like to help you to install your new Nexus product. Please read through this manual carefully before starting your installation. This unique wind transducer provides both wind speed and wind angle relative the boat. If a Speed transducer is connected to the system, true wind speed and angle is computed. In addition, a compass or GPS ant
ページ6に含まれる内容の要旨
NX Wind transducer set English 5
ページ7に含まれる内容の要旨
English NX Wind transducer set 3.1 Mounting step by step 2. Drill the three mounting holes 1. Mark the mounting holes using the bracket as an template using a 3,2mm drill 3. Mount the bracket with the three 4. Insert the transducer into the supplied screws bracket from front to back 5. Tighten the lock nut by hand only 6. Attach the security clamp (do not use any tool)
ページ8に含まれる内容の要旨
NX Wind transducer set English 4 Pairing procedure of wind transducer When all instruments have been installed, a pairing procedure between the wireless wind transducer and the WSI unit must be made to introduce it to your specific NX network system. This is how you do it: a. Make sure the wind transducer is fully charged! If the wind transducer has been stored in a dark place for a long time, you must first charge it by exposing the solar cell for sun light some hours before use
ページ9に含まれる内容の要旨
English NX Wind transducer set If you have been using the Wireless wind for several seasons, you may need to change the rechargeable cells. Use Nexus original NiMh cells. IMPORTANT! Do not change the rechargeable cell in strong light! If needed, cover the solar cell with your hand while changing cells! Open the battery lid and remove the old cell from the connector, install the new cells. Return the used Cells to waste collection! 7 Change transducer or WSI-box /
ページ10に含まれる内容の要旨
NX Wind transducer set English 8 Connection to the system ‘ Battery Nexus Network Note If the WSI-box is connected to a Nexus Network, the WSI-box will be powered via that cable and there is no need to connect the red and black power cables! 9 Maintenance! If you have been using the Wireless wind for several seasons, you may need to change the rechargeable cells. Use Nexus original NiMh cells IMPORTANT! Do not change the re
ページ11に含まれる内容の要旨
English NX Wind transducer set 10 Specifications Power consumption 0,24 W Current consumption: 20mA @12V Wind speed range 0.9-90 knots, 0.5-50 m/s Angle Accuracy Better than ± 2° Speed Accuracy ± 5% Temperature range Operating -5ºC to +70ºC Storage -20ºC to +80ºC Weight 260 g. 10.1 Dimensions: 10
ページ12に含まれる内容の要旨
NX Wind transducer set English 11 Waranty 11
ページ13に含まれる内容の要旨
English NX Wind transducer set 12
ページ14に含まれる内容の要旨
NX Wind transducer set English 13
ページ15に含まれる内容の要旨
English NX Wind transducer set Copyright ©: Nexus Marine AB Kuskvägen 4, 191 62 Sollentuna, Sweden Tel: +46 -(0) 8 – 506 939 00. Fax: +46 -(0) 8 -506 939 01 www.nexusmarine.se 14 22904-1 Edition 2