ページ1に含まれる内容の要旨
MAGPIX B1380
Digital Camera Binocular
User’s Manual
1
ページ2に含まれる内容の要旨
Introduction The MAGPiX B1380 is a digital camera with a specially designed 8X optical telescopic lens. Combined with its 2X digital zoom and very high- speed shutter, the MAGPiX B1380 produces amazing freeze-frame action pictures of up to 16X magnification. These images can be downloaded and viewed on your personal computer through the USB port after installing the software included in this package. To get the most out of your camera, please read this manual carefully. This manual is
ページ3に含まれる内容の要旨
A. Getting To Know Your Camera Below are three views of the MAGPiX B1380 to help familiarize you with your new camera. The parts and corresponding numbers will be referred to throughout this manual. 1 Left Barrel 2 Left Objective Lens 3 Camera Lens 4 Right Objective Lens 5 Right Barrel 6 Right Eyepiece 7 Dioptric Knob 8 Shutter Button 9 Mode Button 10 Select Button 11 Power Button 12 Left Eyepiece 13 Focus Knob 14 LCD Display Figure 1. Top View
ページ4に含まれる内容の要旨
8 Shutter Button 9 Mode Button 10 Select Button 11 Power Button 15 USBPort 16 Battery Compartment Figure 2. Back View 17 Camera Lens 18 Eyepieces 19 Tripod Mount Figure 3. Side View 4
ページ5に含まれる内容の要旨
B. Using Your Camera 1. Load The Batteries. Open the Battery Compartment (16) and insert four AAA batteries (included), paying attention to insert them in the correct direction. See Figure 4. Close the compartment. A battery life icon is located on the lower left corner of the status LCD. Your pictures will remain in the camera, until you delete them, even if the batteries loose their charge. Figure 4. Loading Th
ページ6に含まれる内容の要旨
3. Use The Eyepieces (6 & 12) To Aim Your Camera. The camera works best at taking pictures of objects outdoors at 45ft away from you or more. Also, since the camera is point and shoot and independent from the binoculars, you do not need to focus the binoculars to get great in-focus pictures. 4. Take Your Picture. Hold your MAGPiX B1380 steady and aim at a scene or object 45ft. or greater away from you. Press and release the Shutter Button (8) to take the picture. Make sure you do
ページ7に含まれる内容の要旨
C. Camera Modes and Settings This camera offers the following functions that can be selected by pressing the Mode Button (9) after it is turned on: 1. Resolution Selection/ 16X Magnification Mode 2. Self-timer 3. Erase Last One Pictures 4. Erase All Picture 1. Resolution Selection/ 16X Magnification Mode With the camera is turned on, press the Mode Button (9) once and "FEA" will appear on the LCD Display (14). Then press the Select Button (10) to cycle through to your
ページ8に含まれる内容の要旨
Figure 8. Select Medium Resolution Figure 7. Default High Resolution (2 Stars) (3 Stars) Figure 9. Select 1 Star Resolution Figure 10. Engage 2X Digital Zoom (1 Star) For 16X Magnification 8
ページ9に含まれる内容の要旨
2. Self-Timer Mode With the camera is turned on, press the Mode Button (9) two times (until you see the timer icon), then press the Select Button (10). Once in this mode, press the Shutter Button (8) to activate the self-timer. The camera will beep for 10 seconds before taking the picture automatically. When the number of available exposures has increased by one on the LCD Display (14), the camera is ready to take another picture. Figure 12. Activate Self-timer Figure
ページ10に含まれる内容の要旨
3. Erase Last One Picture With the camera is turned on, press the Mode Button (8) three times and you will see 'ONE' with a trash can icon. Then, to erase the last picture, press and hold the Select Button (10) for 2 seconds. The number of available exposure on the LCD Display (14) will be decreased by 1 exposure after that. Figure 13. Erase Last One Picture 10
ページ11に含まれる内容の要旨
4. Erase All Pictures With the camera is on, press the Mode Button (9) four times and you will see "ALL' and the trash can icon. Then, to erase all pictures that are in the camera, press and hold the Select Button (10) for 2 seconds. The LCD will then show '0'. Figure 14. Erase All Pictures 11
ページ12に含まれる内容の要旨
D. Viewfinding and Taking Better Picture Tips How to use the binoculars: 1. Hold the MAGPiX B1380 in a comfortable viewing position, and adjust the left and right barrels (1 & 5) apart or together until one single circular field is seen with both of your eyes at the same time. 2. To adjust the focus, look into the Left Eyepiece (12) with your left eye (with the right eye closed) to aim at any object 16ft. away, rotate the Focus Knob (13) clockwise or anti-clockwise to get the best f
ページ13に含まれる内容の要旨
Viewfinding • The function of the binocular is as an aid for viewfinding. • The area seen through the binocular is a circular area, approximately 10 times magnification of original image. • The MAGPiX B1380 lens produces up to a 16X enlarged image with 4x3 standard shape. Figure 15. View area difference between binocular and camera • You do not need to focus the binoculars for a focused picture. The camera is auto-focus and is independent from the binoculars.
ページ14に含まれる内容の要旨
• Depending upon the amount of available light, the shutter speed is fast enough that you can capture terrific action shots. • Try taking a picture of a helicopter in flight. You'll notice that when you view your picture, you will have stopped the helicopter's rotor blade in mid-flight. 14
ページ15に含まれる内容の要旨
E. Downloading Your Pictures To Your PC 1. Install the drivers and photo software. The CD included in the box contains the MAGPiX B1380 driver and bonus software (Mr. Photo). The drivers must be installed before you connect the MAGPiX B1380 to your computer. NewSoft Mr. Photo is bonus software, and is not necessary to view your pictures. Insert the installation CD into the CD-ROM drive of your computer. A screen will appear as shown in Figure 16. Figure 16. B1380 CD start-up scr
ページ16に含まれる内容の要旨
Click once on "Install B1380 Camera Driver" to start the installation of the driver, and follow the instructions on the screen step by step. After the installation is completed, eject the CD and restart your computer. Then re-insert the installation CD and click once on "Install B1380 TWAIN Driver". Follow the instructions on the screen step by step. After the installation is completed, restart the computer. (Go directly to Step 2, if you do not want to install Mr.Photo on your comput
ページ17に含まれる内容の要旨
2. Connect your MAGPiX B1380 to your computer. Connect the large end of the included USB cable to the USB port of your computer, and connect the smaller end of this cable to the MAGPiX B1380. Then turn on your MAGPiX B1380. Your computer will find new hardware and update its system. Follow the onscreen instructions, if any. Please make sure that you connect the B1380 directly to the USB port on your computer and not through a USB hub. If you receive a warning concerning the absence of a
ページ18に含まれる内容の要旨
4. You will see a window that shows all the picture files stored on your camera. 5. Copy your picture files on your camera to a folder on your computer. - For example, "My Picture" or "My Documents" 6. You can now open your pictures with your favorite imaging/ photo software. 7. To save battery life, please close the 'B1380' folder and disconnect the camera from the computer after you have copied the pictures to your computer. 8. You can delete pictures from your camera by following
ページ19に含まれる内容の要旨
Figure 17. After clicking on the “B1380” icon located in the “My Computer” folder. 19
ページ20に含まれる内容の要旨
Using Presto! Mr.Photo to download your photos. 1. Make sure the MAGPiX B1380 is connected with the USB cable to your computer. 2. Turn the MAGPiX B1380 on. 3. Launch the Presto'Mr.Photo application. 4. Click the "Set up Devices" icon and select "MAGPiX B1380" as "Digital Camera", then click "Close" to exit. (see Figure 18 and 19). 5. Click the "Load DSC Photos" icon and select "MAGPiX B1380" from drop down menu. Your photos will begin to download (see figure 20). 6. If the error me
