Bogen CommunicationsMIC2Sの取扱説明書

ページ1に含まれる内容の要旨

Block Diagram
MIC2S
Microphone Input
Module
Features
• Electronically-balanced
• Screw terminal connections
• Phantom power
• Gain/Trim control
• Hi- and Lo-cut filters
• Adjustable voice enhancer
• Audio gating with threshold adjustment
• Variable signal limiter
• 4 levels of available priority
• Can be muted from higher priority modules
• Can mute lower priority modules
50 Spring Street, Ramsey, NJ 07446, U.S.A.
201-934-8500; Fax: 201-934-9832
Printed in Taiwan. 0208
© 2002 Bogen Communicati

ページ2に含まれる内容の要旨

Module Installation Jumper Selections * 1. Turn off all power to the unit. Priority Level This module can respond to 4 different levels of priority. 2. Make all necessary jumper selections. Priority 1 is the highest priority. It mutes modules with 3. Position module in front of desired module bay lower priorities and is never muted. Priority 2 can be muted opening, making sure that the module is right- by Priority 1 modules and mutes modules set for 3 or 4. side up. Priority 3 is muted by either

ページ3に含まれる内容の要旨

Block Diagram MIC2S Microphone Input Module Features • Electronically-balanced • Screw terminal connections • Phantom power • Gain/Trim control • Hi- and Lo-cut filters • Adjustable voice enhancer • Audio gating with threshold adjustment • Variable signal limiter • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 Printed in Taiwan. 0208 © 2002 Bogen Communicati