ページ1に含まれる内容の要旨
Ver. 1A
Quick Installation Guide
USB 2.0 Gigabit Network Adapter
Model # AGIGAUSB
Package Contents:
• Gigabit Network Adapter
• USB 2.0 Cable
• Driver CD
• Quick Installation Guide
Step 3 Click Next at the welcome screen.
Section 1
Installation
The following steps and screen shots are for Windows XP.
Steps for Windows 2000 are similar unless noted otherwise.
Note: Do not connect the USB 2.0 Gigabit Network Adapter to your computer
until you’ve reached the appointed step. If the Gigabit Adapter
ページ2に含まれる内容の要旨
Step 4 Click Next to accept the default destination location for the driver to be Step 6 Click Continue Anyway at the Windows Logo Testing prompt. installed in or click Browse to select the desired location. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 7 Click Finish to complete the installation wizard. Step 5 Click Next to accept the Program Folder for the driver. Continue on Back Continue on back...
ページ3に含まれる内容の要旨
Step 8 Connect one end of the Gigabit Network Adapter to your computer’s USB For Windows 2000, select Search for a suitable driver for my device Section 3 port and connect the other end to a hub/switch/router. (Recommended) and click Next. Then check on the CD-ROM drives check box and click Next. Step 9 At the Found New Hardware Wizard window, select No, not this time and click Next. Step 11 Click Continue Anyway at the Windows Logo Testing prompt. (For Windows 2000, click Yes at the Digital Sig
ページ4に含まれる内容の要旨
Step 3 Expand Network adapters from the list and verify that 10/100 Gigabit Section 2 USB2.0 Network Adapter is listed and no yellow question mark is beside it. Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on My Computer from your desktop and select Properties. Step 2 Select the Hardware tab and click on Device Manager. Congratulations! You have successfully installed the USB 2.0 Gigabit Network Adapter
