Kenko INNOVATIVE STRONG PAN-TILT HEAD MVH-2Dの取扱説明書

ページ1に含まれる内容の要旨

SPECIFICATIONS
Kenko

Mounting: ------------------------ Horizontal and upright or inverted position

Operating temperature: --------- -10ºCto 45ºC
INNOVATIVE STRONG PAN-TILT HEAD
Dimensions: --------------------- 90w X 144H X 106D mm
Weight: --------------------------- 1.45kg
MVH-2D
Power Source -------------------- DC12V 270mA max. (8 X AA size penlight batteries)
INSTRACTION MANUAL
Pan movement: ------------------ -150º to +150º in horizontal plane

Tilt movement: ---------

ページ2に含まれる内容の要旨

Specialty Battery 1. PAN-TILT HEAD is set on the tripod and use for Video camera with wired remote control. Battery lifetime 2. Pan (vertical) and Tilt (horizontal) is possible to control and also possible pan and 1. Normal AA battery good for 2hours to operate. Tilt same time. 2. After use turn off power switch (13) or remove to remote controller. Possible to adjust speed variable. Power drain will occur if unit is not switched off. Notice for use Attention for battery

ページ3に含まれる内容の要旨

NAME OF PARTS INSTRCTION (1) Battery cover screw 1.PUT BATTRY Type: AA Battery 8pces (Option). (2) Battery box • Loosen Battery cover fix screw (1) Battery box (2) take out. • Put Battery with care + (3) Battery box cover & - in to Battery box (8)Camera (2) (13) Power switch Fix knob Battery is each side (9) Connecter for Remote controller 4pces. (10) Cable for Remote controller (5) Power cable • Put Battery box cover (6) Power jac

ページ4に含まれる内容の要旨

OPERATION 3.SET CAMERA Camera direction is same as diagram. Balance of camera and lens must be center and tight screw. Screw Power switch (13) ON • Speed control position is possible to slide. Speed control lever (11) slid to left be low Right is High Attention! speed. This unit can hold Max.5kg camera Not possible to adjust Pan and Tilt (balance height 6cm). Not in balance separately. will diminimize functions. Attention! Tilt speed will be change depend on weight of