ページ1に含まれる内容の要旨
SK 6F
P R O F E S S I O N A L M I X E R
OWNER’S M A N U A L
STANTON MAGNETICS, LLC
info@stantonmagnetics.com • (954) 929-8999
w w w . s t a n t o n m a g n e t i c s . c o m
© 2001, Stanton Magnetics, LLC
ページ2に含まれる内容の要旨
T R O U B L E S H O O T I N G PROBLEM CAUSE SOLUTION Thank you for making Stanton your first choice in professional DJ mixers. Excessive hum when using Poor ground connection. Properly connect turntable This innovative family of mixers has been developed with input from the phono source. ground wire to mixer ground professional DJ community, bringing to the marketplace a previously terminal. unavailable, affordable combination of user-friendly, functional design, rugged construction, and profe
ページ3に含まれる内容の要旨
DESCRIPTION OF FUNCTIONS 1. Mic level: Controls the user to preview a mix. the master output phono signal inputs for overall microphone output between channels 1 and channels 1 and 2. level. 10. Power indicator: 2. Blue LED indicates 27. Microphone input: 2. Send: Controls the whether mixer is ON or 18. Cue select: In "CUE" 1/4” connector level of the effect send OFF. position, the pre-selected output. this is used to set signal of control (9) will be 28. Ground posts : the level of the signal
ページ4に含まれる内容の要旨
FADER CLEANING T E C H N I C A L S P E C I F I C AT I O N S Line inputs: 2 (RCA), 150 mV / 27K ohm The SK FOUR faders may need lubrication from time to time. This will extend the fader life and eliminate any potential damage due to extended heavy usage. Phono inputs: 2 (RCA), 3 mV / 47K ohm Follow the instruction below the lubricate your faders: Send: 2 (1/4”), 150 mV / 27K ohm Return: 2 (1/4”), 775 mV / 1K ohm 1. Remove the 3 fader knobs and 4 3. Spray a small amount of cleaner or DJ mic input
