ページ1に含まれる内容の要旨
®
MultiModem ZBA
MT9234ZBA-USB
User Guide
ページ2に含まれる内容の要旨
MultiModem ZBA User Guide MT934ZBA-USB S000419D Revision D Copyright All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Copyright © 2009 by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermor
ページ3に含まれる内容の要旨
Chapter 1 – Description and Specification CONTENTS CHAPTER 1 – DESCRIPTION AND SPECIFICATION ....................................................... 4 Features include: ............................................................................................................................................................ 4 Universal Serial Bus (USB) ........................................................................................................................................... 4
ページ4に含まれる内容の要旨
Chapter 1 – Description and Specification Chapter 1 – Description and Specification Congratulations on your purchase of the MultiModem ZBA-USB modem. Your MultiModem product data/fax modem supports remote configuration and dial-up connections. It offers V.34/33.6K fax and Error Correction Mode that reduces fax transmission time by more than half when compared to traditional fax modems. In addition, they are globally approved for use in many countries around the world. This means one model
ページ5に含まれる内容の要旨
Chapter 1 – Description and Specification Technical Specifications Your MultiModemZBA-USB modem meets the following specifications: ® Trade Name MultiModem ZBA Model Number MT9234ZBA-USB Server-to-Client Data Rates V.90 speeds when accessing a V.90 or V.92 server (actual speed depends on server capabilities and line conditions) Client-to-Server Data Rates Up to 50Kbps when accessing a V.92 server (actual speed depends on server capabilities and line conditions); otherwise, the same as
ページ6に含まれる内容の要旨
Chapter 2 - Installation Chapter 2 – Installation This chapter shows you step-by-step how to set up your Multi-Tech MultiModem product. Safety Warning Telecom ● Use this product only with UL and cUL listed computers. ● To reduce the risk of fire, use only 26 AWG (.41mm) or larger telephone wiring. ● Never install telephone wiring during a lightning storm. ● Never install a telephone jack in wet locations unless the jack is specifically designed for wet locations. ● Never touch uninsula
ページ7に含まれる内容の要旨
Chapter 2 - Installation Install the Modem Driver Introduction Compatibility: This MultiModem is compatible with Windows Operating Systems Vista/XP/2003/2008 and Linux. Windows Drivers: The MultiModem product driver must be installed in your computer’s program directory. The Windows drivers are located on the MultiModem product CD in the DriversIWindows Drivers folder. A complete set of drivers for each operating system is organized into Vista and XP with either 32-bit or 64-bit processor
ページ8に含まれる内容の要旨
Chapter 2 - Installation 5. The next screen prompts you to insert the disc that came with your MultiModem product. If you have the disc that came with your device, insert it now. Then, click on I don’t have the disc. Show me other options. Windows may prompt you to search online, but this is not necessary. 6. Choose Browse my computer for driver software (advanced). 8 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D)
ページ9に含まれる内容の要旨
Chapter 2 - Installation 7. At the Browse for driver software on your computer screen. Click the Browse button. 8. Browse to the Drivers folder on your MultiModem product CD , then select the Windows_Drivers folder and then the Vista32 folder. If you were installing drivers on a Vista 64-bit Operating System, you would browse to the Vista64 folder. Click OK, then Click Next. 9. Would you like to install this device software? screen appears. Click Install. Multi-Tech Systems, In
ページ10に含まれる内容の要旨
Chapter 2 - Installation 10. Installing driver software… screen appears. 11. When the software for this device has been successfully installed screen appears with Windows has finished installing the driver software for this device: MT9234ZBA-USB Multimodem. Click Close. 10 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D)
ページ11に含まれる内容の要旨
Chapter 2 - Installation Installation of the Modem 12. The Found New Hardware – Multi-Tech Systems MultiModem product screen appears. If you have the disc that came with your device, insert it now. The MultiModem product CD is still in the CD ROM drive. Click Next. 13. Would you like to install this device software? Click Install. Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) 11
ページ12に含まれる内容の要旨
Chapter 2 - Installation 14. The software for this device has ebeen successfully installed screen appears. Windows has finished installing the driver software for this device: Multi-Tech Systems MT9234ZBA-USB. 15. Click Close. The installation of drivers is now complete. After installation has been completed, you should test the operation of your new MultiModem product by registering it. Key in the URL given below and follow the on-line instructions: http://www.multitech.com/register
ページ13に含まれる内容の要旨
Chapter 2 - Installation Installing the Modem Driver in Windows Server 2008,XP,2003 This installation assumes a Windows Server 2008, XP, or 2003 operating system. Part A for Windows Server 2008,XP,2003: Installing the Serial Port 1. Connect the USB cable between the MultiModem and the PC. 2. Insert the MultiModem product CD into your CD-ROM drive. The CD uses the Autorun feature, and after a brief delay, the MULTIMODEM PRODUCT Setup – Welcome screen appears. Close the Welcome screen. I
ページ14に含まれる内容の要旨
Chapter 2 - Installation 4. The Please choose your search and installation options appears. Select only (floppy, CD-ROM…) ensure that Include this location in the search is selected. Click the Browse button. 5. Browse to the Drivers folder on your MultiModem product CD, then select the Windows_Drivers folder and then the XP32 folder. If you are installing drivers on an XP 64-bit Operating System, you would browse to the XP64 folder. Click Next. 14 Multi-Tech Systems, Inc. MT9234ZBA
ページ15に含まれる内容の要旨
Chapter 2 - Installation 6. Please wait while the wizard searches for the MT9234ZBA-USB MultiModem. This screen only appears briefly. 7. Please select the best match for your hardware from the list below. Select MT9234ZBA-USB MultiModem. Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) 15
ページ16に含まれる内容の要旨
Chapter 2 - Installation 8. A Windows Logo Testing screen appears. Click Continue Anyway. 9. Please wait while the wizard installs the software. 16 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D)
ページ17に含まれる内容の要旨
Chapter 2 - Installation 10. At the Completing the Found New Hardware Wizard screen, click Finish. Installation of the Serial Port is now complete. Part B for Windows Server 2008, XP, 2003: Installing the Modem 11. The Welcome to the Found New Hardware Wizard screen – Can Windows connect to Windows update to search for software? Select No, not this time. Then click Next. Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D) 17
ページ18に含まれる内容の要旨
Chapter 2 - Installation 12. This wizard helps you install software for Multi-Tech MT9234ZBA-USB product. Click on Install from a list or specific location (Advanced). Then click Next. 13. The Please choose your search and installation options screen appears. Click Next. 18 Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419D)
ページ19に含まれる内容の要旨
Chapter 2 - Installation 14. Please wait while the wizard searches for the MT9234ZBA-USB screen appears. This screen only appears briefly. 15. Please select the best match for your hardware from the list below. 16. The final Windows Logo Testing screen may appear depending on operating system settings. This screen pertains to the creation of a modem entity in the operating system that accommodates the MultiModem product. Click Continue Anyway. Multi-Tech Systems, Inc. MT9234ZBA-
ページ20に含まれる内容の要旨
Chapter 2 - Installation 17. Please wait while the wizard installs the software. 18. The Completing the Found New Hardware Wizard screen appears. Click Finish. With the modem .inf file successfully installed, the entire software installation procedure for the MultiModem product is complete. After installation has been completed, you should test the operation of your new MultiModem product by registering it. Key in the URL given below and follow the on-line instructions: http:/
