ページ1に含まれる内容の要旨
TD-8816
ADSL2+ Modem Router
Rev:3.1.0
1910010870
ページ2に含まれる内容の要旨
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES CO.,
ページ3に含まれる内容の要旨
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran
ページ4に含まれる内容の要旨
Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be used in th
ページ5に含まれる内容の要旨
DECLARATION OF CONFORMITY For the following equipment: Product Description: ADSL2+ Modem Router Model No.: TD-8816 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents EN 55022:2010
ページ6に含まれる内容の要旨
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview...................................................................................................... 2 1.2 Main Features .........................................................................................................
ページ7に含まれる内容の要旨
4.5.6 CWMP ............................................................................................................................50 4.6 Maintenance............................................................................................................ 51 4.6.1 Administration.................................................................................................................51 4.6.2 Time Zone ..............................................................................
ページ8に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Package Contents The following items should be found in your package: One TD-8816 ADSL2+ Modem Router One Power Adapter for TD-8816 ADSL2+ Modem Router Quick Installation Guide One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD , including: This User Guide Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact y
ページ9に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Chapter 1. Introduction Thank you for choosing the TD-8816 ADSL2+ Modem Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Modem Router is easy to use. Connect the TD-8816 to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be net
ページ10に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Supports Multiple PVC (Permanent Virtual Circuit). Built-in DHCP server. Built-in firewall, supports IP/MAC filter, Application filter and URL filter. Supports Virtual Server, DMZ host and IP Address Mapping. Supports Dynamic DNS, UPnP and Static Routing. Supports system log and flow Statistics. Supports firmware upgrade and Web management. 1.3 Conventions The Modem Router or device mentioned in this User Guide stands for TD-8816 wi
ページ11に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On The modem router is powered on. Power The modem router is off. Please ensure that the power Off adapter is connected correctly. On There is a device connected to this LAN port. The modem router is sending or re
ページ12に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide 2.2 The Back Panel Figure 2-2 ON/OFF: The switch for the power. POWER: The Power plug is where you will connect the power adapter. RESET: There are two ways to reset the modem router's factory defaults. Method one: With the modem router powered on, use a pin to press and hold the Reset button (about 5 seconds) until all LED is lit. And then release the button and wait the modem router to reboot to its factory default settings. Method tw
ページ13に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Figure 2-4 Wall-mount Install Note: The diameter of the screw, 4mm
ページ14に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide TD-8816. Connect the other end to the MODEM port of the external splitter. Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s Ethernet port or a regular hub/switch port, and the other end to the LAN port on the TD-8816. Step 3: Attach the power adapter. Connect the power adapter to the POWER connector on the rear of the device and plug in the adapter to a wall outlet or power extension. Step 4: Turn on the TD-8
ページ15に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration The default IP address of the TD-8816 ADSL2+ Modem Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values for description. Connect the local PC to the LAN/WAN port of the Modem Router. And then you can configure the IP address for your PC in the following way. Obtain an IP address auto
ページ16に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Figure 3-2 You can check it following the steps below: 1) Is the connection between your PC and the modem router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the modem router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 Login Once your host PC is properly configu
ページ17に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Click the NEXT button. Figure 3-8 Step 2: Configure the time for the modem router, and then click the NEXT button. Figure 3-9 Step 3: Select the connection type to connect to the ISP (We select PPPoE/PPPoA mode for example here), and then click the NEXT button. Figure 3-10 Step 4: Configure the following options provided by your ISP: Username, Password, VPI, VCI and Connection Type. Then click NEXT. 10
ページ18に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Figure 3-11 Step 5: Click NEXT to finish the Quick Start. Figure 3-12 11
ページ19に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will get help from this chapter to configure the advanced settings through the Web-based Utility. After your successful login, you can configure and manage the device. There are main menus on the top of the Web
ページ20に含まれる内容の要旨
TD-8816 ADSL2+ Modem Router User Guide Figure 4-2 4.1.2 System Log Choose “Status →System Log” menu, and you will be able to query the logs of the Modem Router. 13
