ページ1に含まれる内容の要旨
SERIES 500 POS KEYBOARD
PROGRAMMING & USER’S GUIDE
ページ2に含まれる内容の要旨
SERIES 500 QUICK REFERENCE GUIDE to KEY PROGRAMMING To Program a Primary Key 1. Swipe Programmer’s Card through Mag Card Reader. 2. Type 00 on the numeric keypad on the Series 500 Keyboard. 3. Press the key on the Series 500 Keyboard that you wish to program. 4. Type the desired key sequence on the AUX (PS/2) keyboard. 5. Press the “ENTER” key next to the numeric keypad on the Series 500 Keyboard. 6. To program additional keys go to Step 3 and repeat process. 7. To exit pro
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SCOPE ...........................................................................................................vi SPECIAL NOTE.............................................................................................vi PRODUCT INFORMATION...........................................................................2 MODEL DESCRIPTION ................................................................................................. 2 FEATURES...................
ページ4に含まれる内容の要旨
MAINTENANCE............................................................................................58 PRECAUTIONS .............................................................................................................58 CLEANING......................................................................................................................58 KEY LEGEND CHANGE ..............................................................................................58 3/4 AND 5/8-
ページ5に含まれる内容の要旨
APPENDIX A SERIES 500 POS STANDARD KEYBOARD LAYOUTS A1 APPENDIX B KEYBOARD CABLE/CONNECTOR DATA B1 APPENDIX C ASC11 CHARACTER SET C1 APPENDIX D 101/102-KEY KEYBOARD KEY NUMBER TO SCAN CODE CROSS REFERENCE D1 LIST OF TABLES TABLE 1. SERIES 500 POS KEYBOARD - TYPICAL CONTROLS AND INDICATORS 8 TABLE 2. LOCAL MODE PROGRAMMING FUNCTION CODES AND DEFAULT SETTINGS 9 TABLE 3. LOCAL MODE PROGRAMMING INSTRUCTIONS
ページ6に含まれる内容の要旨
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTICE This equipment complies with the limits for a Class A computing device in accordance with the specifications in Part 15 of FCC rules which are designed to minimize radio frequency interference in the installation; however, there is no guarantee that radio or television interference will not occur in any particular installation. If this equipment does cause interference to radio or tel
ページ7に含まれる内容の要旨
SCOPE This user's guide provides the information and procedures needed to install, operate and program your Series 500 POS Keyboard. Differences in models and optional features are described in this manual, where applicable. It is suggested that the entire manual be read before attempting installation or programming. If assistance is needed that is beyond the coverage provided in this guide, please contact Customer Service: Ultimate Technology Corporation 100 Rawson
ページ8に含まれる内容の要旨
Figure 1. Typical Point-of-Sale station with standard QWERTY Series 500 keyboard Series 500 POS Keyboard
ページ9に含まれる内容の要旨
PRODUCT INFORMATION MODEL DESCRIPTION Series 500 POS Keyboards are point-of-sale (POS) keyboards designed for use with a PC or ASCII terminal. These keyboards have total flexibility in keyboard layout coupled with an extensive programming capability. Each keyboard contains a built-in magnetic stripe reader (MSR), two serial ports, two cash drawer status ports, a main keyboard port, and an auxiliary keyboard port. The Series 500 POS Keyboard provides both the hardware and fir
ページ10に含まれる内容の要旨
OPTIONAL PEDESTAL MOUNT 2
ページ11に含まれる内容の要旨
SPECIFICATIONS DIMENSIONS ENVIRONMENT • Depth - 8 Inches • Storage temperature -20° to 70°C (-68° to 158°F) • Width - 13 Inches • Operating temperature 0° to 50°C (32° to 122°F) • Height - 3 Inches APPROVALS WEIGHT • FCC Class A • 3.5 pounds (avg) • UL recognized • UL recognized (Canada) ELECTRICAL • 135 - 185mA at 5VDC (supplied from host) • 3-volt lithium battery (battery backup for memory data retention when host source voltage removed) SERVICE AND WARRANTY
ページ12に含まれる内容の要旨
INSTALLATION UNPACKING AND INSPECTION 1. Examine the exterior of the shipping carton for signs of abuse or damage that may have occurred during transport. Report all evidence of damage or abuse to shipper and dealer. NOTE If any damage may have occurred during transport, examine keyboard and accessories carefully before performing any set-up procedures. Return damaged keyboards to the dealer. See Service paragraph. 2. Open top of shipping carton and carefully remove
ページ13に含まれる内容の要旨
EXTERNAL CONNECTIONS As required by the hardware configuration, connect the keyboard to its host computer and other peripheral devices as shown in Figures 2 and 3. Note that the specific use for each connector on the keyboard is marked adjacent to each connector. Depending on the make and model of the user's equipment, the following cables and/or adapters may need to be supplied by the user to complete the installation: Standard 6-foot cable, 6-Pin Modular to 6-Pin Modular
ページ14に含まれる内容の要旨
Main RS232 Port Aux RS232 Bar Code Scanner Port CAB20138 Receipt Printer Cash Drawer 1 Cash Drawer (Driver) Port 1 & 2 Port In Cash Drawer 1 (Driver) Port Out Cash Drawer 1 Cash Drawer 2 CAB20138 (Drawer) Port In Cash Drawer 2 (Drawer) Cash Drawer 2 Port Out Drawer Type Jumpers CAB20133 or CAB20137 or CAB20134 PC or Terminal Main KB Port Adapter (optional) Aux KB Port PS2 Type KB 6
ページ15に含まれる内容の要旨
Figure 2. Typical keyboard external connections 7
ページ16に含まれる内容の要旨
Figure 3. Keyboard external connectors - rear view 8
ページ17に含まれる内容の要旨
OPERATION CONTROLS AND INDICATORS Operating controls and indicators on the Series 500 Standard QWERTY Keyboard are shown in Figure 4 and described in Table 1. Because most Series 500 POS Keyboards are customized to match the user's needs, keyboard layouts and the function of the keys may vary widely from the one shown in Figure 4. Although the location of keys may differ among keyboard and types of keyboards, the function of the controls and indicators described in Table 1
ページ18に含まれる内容の要旨
Figure 4. Series 500 POS keyboard - typical controls and indicators Table 1. Series 500 POS Keyboard - Typical Controls and Indicators (See Figure 4) Index Name Function No. 1 through 3 Light Emitting LED (1) SECURE - When on, indicates keyboard is secured(locked); Diode (LED) when off, indicates keyboard is unlocked. Indicators LED (2) When on, indicates keyboard is in CAP LOCK mode. LED (3) When on, indicates keyboard is in NUM LOCK mode. When in local programmin
ページ19に含まれる内容の要旨
All Other User Defined Keys User defined keys programmed by user/developer. 11
ページ20に含まれる内容の要旨
PROGRAMMING PROGRAMMING KEYBOARD OPERATING PARAMETERS The operating parameters of the keyboard can be configured (programmed) remotely from the host computer or locally at the keyboard. Keyboard programming in the remote mode sets the keyboard parameters as commanded by the host computer input applied at the main communications port. Selection of the local programming mode enables keyboard parameter setup locally at the keyboard. Note that all keyboards come from the factory
