ページ1に含まれる内容の要旨
Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
DXZ748RMP
RDS-EON FM / MW / LW RADIO CD / MP3 / WMA
COMBINATION
•
COMBINE RADIO FM/PO/GO RDS-EON-LECTEUR DE CD/
MP3/WMA
•
RDS-EON UKW/MW/LW RADIO CD/MP3/WMA
KOMBINATION
•
COMBINAZIONE DI RADIO RDS-EON FM/MW/LW E
LETTORE CD/MP3/WMA
•
RDS-EON FM/MW/LW RADIO CD/MP3/WMA COMBINATIE
•
COMBINACIÓN DE RADIO RDS-EON DE FM/MW/LW Y
REPRODUCTOR DE CD/MP
ページ2に含まれる内容の要旨
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected via the CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations
ページ3に含まれる内容の要旨
English English English Display Items Contents 3. If you move the SLOPING CONSOLE by the SLOPING CONSOLE tries to close, the hand, this may create play. To correct this safety mechanism is triggered and the Function mode indication 1. PRECAUTIONS ............................................................................................................................... 3 Operation status indication play, with the power on for the unit, press the SLOPING CONSOLE returns to the open The names o
ページ4に含まれる内容の要旨
English English English Français Deutsch Italiano Nederlands Español Svenska Português Names of the Buttons and Their Functions CONTROLS / LES COMMANDES / REGLER / CONTROLLI 3. NOMENCLATURE 2. • Switch the operation mode among the Radio [FNC] button REGELAARS / CONTROLES / KONTROLLER / CONTROLOS mode, etc. Note: • Press the button to turn on the power. • Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold). Press and hold the button for 1 secon
ページ5に含まれる内容の要旨
English 4. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Insert the DCP so that the A section on the in the DCP (DETACHABLE CONTROL PANEL) right side of the DCP catches on the hook B case to prevent scratches. on the unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. With the SLOPING CONSOLE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button
ページ6に含まれる内容の要旨
English 5. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [ ] [ ] FUNC 2-ZONE [ ] [ ],[ ] [ ],[ ] [ ] BAND [ ] TA [MUTE] [ ] DISP [ ] [ ] PS/AS PTY [ ] AF Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IECR-6/1.5V) Batteries 2. Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit f
ページ7に含まれる内容の要旨
English Functions of Remote Control Unit Buttons Mode CD changer Radio (RDS) /DAB CD/MP3/WMA TV DVD changer Button [FUNC] Switches among radio, DAB, CD/MP3/WMA, CD changer, DVD changer, TV and AUX. Plays the first track. Moves the next disc [BAND] Switches reception Switches reception Top play. in increasing order. band. band. Increases and decreases volume (in all modes). [ ] , [ ] [ ] , [ ] Moves preset Moves tracks up and down. Moves preset channels up and When pressed a
ページ8に含まれる内容の要旨
English 6. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “2. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION 1. Press the front part of the [ROTARY] knob. Be sure to lower the volume before switch- The knob will pop up. ing off the unit power or the ignition key. The 2. Turning the [ROTARY] knob clockwise in- unit remembers its last volume setting. If you creases the volume; turning it counterclock- switch the power off with t
ページ9に含まれる内容の要旨
English Basic Operations Notes: BASS GAIN : –6 to 8 (The factory default • The volume changes each time the ADF setting is setting is “0”) switched. Turn down the volume and the sub- BASS FREQ : 50Hz/80Hz/120Hz (The woofer volume before performing a switching op- factory default setting is eration. “50”) • Sufficient effects cannot be obtained with some BASS Q : 1/1.25/1.5/2 (The factory speaker systems. In such cases, adjust the vol- ume. default setting is “1”) 4. When the adjustment is comple
ページ10に含まれる内容の要旨
English Basic Operations Radio Operations Adjusting the fader Listening to the radio 1. Press the [FNC] button and select the radio 1. Press the [A-M] button and select “FADER”. mode. The frequency or PS and PTY appears 2. Turning the [ROTARY] knob clockwise in the display. emphasizes the sound from the front ∗ PS: Programme service name speakers; turning it counterclockwise emphasizes the sound from the rear ∗ PTY: Programme type speakers. 2. Press the [BND] button and select the radio ∗ The fa
ページ11に含まれる内容の要旨
English Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and Auto store is a function for storing up to 6 sta- step tuning. tions that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a When you are in the step tuning mode, the fre- previously stored station remains unoverwritten quency changes one step at a time. In the quick at the memory position. tuning mode, you can quickly tune the desired frequency. 1. Press the [BND]
ページ12に含まれる内容の要旨
English RDS Operations ∗ This factory default setting is “ON”. RDS (Radio Data System) 1. Press and hold the [T] button for 1 second or This unit has a built-in RDS decoder system that longer to switch to the adjustment selection supports broadcast stations transmitting RDS data. display. This system can display the name of the broadcast 2. Press the [a] or [d] button to select station being received (PS) and can automatically Å Å Å Å Å Î “ LINK ACT ”. switch to the broadcast station with the be
ページ13に含まれる内容の要旨
English RDS Operations TA (Traffic Announcement) PTY In the TA standby mode, when a traffic an- This function enables you to listen to a broad- nouncement broadcast starts, the traffic an- cast of the selected programme type even if the nouncement broadcast is received as top prior- unit is on a function mode other than radio. ity regardless of the function mode so you can ∗ Some countries do not yet have PTY broadcast. listen to it. Traffic programme (TP) automatic ∗ In the TA standby mode, a T
ページ14に含まれる内容の要旨
English RDS Operations PTY seek PTY preset memory 1. When you press the [ ] button, the PTY 1. When you press the [ ] button, the PTY select mode is turned on. select mode is turned on. 2. Select PTY. 2. Turn the [ROTARY] knob clockwise or coun- terclockwise to select the desired PTY. 3. Press the [a] or [d] button. If you press the [d] button, the unit seeks a PTY broad- The 29 types of PTY below can be selected. cast moving up the frequencies; if you press 3. If you press and hold any one of t
ページ15に含まれる内容の要旨
English RDS Operations Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emer- gency broadcast can be heard. ●Cancelling an emergency broadcast If you press the [AF] button, emergency broad- cast reception is cancelled. Switching the PTY display language You can select one of 4 languages (English, German, Swedish or French) for the PTY dis- played in the display. ∗ The factory default setting is “ENGLIS
ページ16に含まれる内容の要旨
English CD/MP3/WMA Operations The indication “––:––” appears in the play MP3/WMA time display if you attempt to play files with- What is MP3? out MP3/WMA data. MP3 is an audio compression method and clas- ● Logical format (File system) sified into audio layer 3 of MPEG standards. 1. When writing MP3/WMA file on a CD-R disc This audio compression method has penetrated or CD-RW disc, please select “ISO9660 level into PC users and become a standard format. 1, 2 or JOLIET or Romeo” as the writing so
ページ17に含まれる内容の要旨
English CD/MP3/WMA Operations ∗ The mode changes each time the [FNC] button is 1. Types of recording that can be played are as pressed. (Modes are not displayed for equipment follows. that is not connected.) Setting Set to CD Set to MP3/WMA Disc CD/MP3/WMA Radio (DAB) Mixed with CD and Play CD Play MP3/WMA (CD changer) MP3/WMA type tracks CD type track only Play CD Play CD AUX (TV) (DVD changer) MP3/WMA type track only Play MP3/WMA Play MP3/WMA 2. After making these settings, remove
ページ18に含まれる内容の要旨
English CD/MP3/WMA Operations ●Fast-backward Displaying CD titles This unit can display title data for CD-text/MP3/ Press and hold the [a] button for 1 second or longer. WMA disc and user titles input with this unit. ∗ For MP3/WMA discs, it takes some time until the 1. Press the [D] button to display the title. start of searching and between tracks. In addition, 2. Each time you press and hold the [D] button the playing time may have a margin of error. for 1 second or longer, the title display c
ページ19に含まれる内容の要旨
English CD/MP3/WMA Operations Scan play Folder repeat play This function allows you to locate and play the This function allows you to play a track currently first 10 seconds of all the tracks recorded on a being played in the MP3/WMA folder repeatedly. disc. 1. Press and hold the [RPT] button for 1 second 1. Press the [SCN] button to perform scan play. or longer to perform folder repeat play. The indication “SCN” lights up in the display, The indications “FOLDER” and “RPT” light and “TRK SCAN”
ページ20に含まれる内容の要旨
English CD/MP3/WMA Operations Different pieces of music heard by plural listeners Play list mode This function allows you to play tracks, up to lat- (2-ZONE function) est 5 time stamps, by reading the play list infor- mation written on the disc. About the 2-ZONE function 1. Press and hold the [PLAY LIST] button for 1 The 2-ZONE function is a function that outputs second or longer to turn on or off the play list separate sounds from the MAIN zone and SUB mode. zone by simultaneously operating two
