ページ1に含まれる内容の要旨
MD6883
User’s Guide
PERSONAL AM/FM STEREO/COMPACT
DISC PLAYER WITH 45 SECOND DIGITAL
ANTI-SHOCK PROTECTION
Before operating this product,
please read these instructions completely.
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
ページ3に含まれる内容の要旨
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve
ページ4に含まれる内容の要旨
S E I R T A S S U S D O N I C Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
ページ5に含まれる内容の要旨
LOCATION OF CONTROLS 1 12 2 13 14 3 15 4 5 16 6 7 8 17 9 18 10 19 11 1. Display 13. PLAY/PAUSE (®p)/POWER ON Button 2. Skip/Search/Tuning n Button 14. STOP (n)/POWER OFF 3. Skip/Search/Tuning o Button Button 4. PRESET DOWN Button 15. PRESET UP Button 5. PROG (Program) Button 16. MODE Button 6. ESP/BAND Button 17. CD Compartment 7. LINE OUT Jack (Side of Unit) 18. Battery Compartment (Bottom 8. PHONES (Headphones) Jack of Unit) (Side of Unit) 19. FUNCTION (CD/RADIO) 9. VOLUME Control Switch 10. D
ページ6に含まれる内容の要旨
– + POWER SOURCES This CD player requires either two (2) “AA” size batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION The battery indicator ( ) will appear in the CD display when the batteries need replacing. 1. Open the battery compartment door on the bottom of the unit by sliding it out and lifting up. To prevent the possibility of losing the cover, it cannot be removed. 2. Insert two (2) “AA” size batteries (not included) according to the polarity diagram inside th
ページ7に含まれる内容の要旨
2 OPERATION BASS BOOST TURNING POWER ON/OFF 1 1 1 To emphasize the bass, slide the To turn the unit on, press the DBBS switch to the ON position. For PLAY/PAUSE (®p)/POWER ON normal bass, slide the DBBS switch to button 1. the OFF position. 1 To turn the unit off, Press the STOP (n)/POWER OFF button 2. 1 1 1 AUTO POWER OFF When the unit is stopped (Standby mode) for approximately one minute, the power will automatically turn off. Radio Sound Through a Home Audio System By using a home audio conn
ページ8に含まれる内容の要旨
1 1 2 1 2 2 2 RADIO OPERATION TO LISTEN TO THE RADIO 2 3 1 2 1 Set the VOLUME control 1 to minimum Slide the FUNCTION switch 1 to the RADIO and plug the headphones into the position. Press the ESP/BAND button 2 to PHONES jack. Press the PLAY/PAUSE select a band (AM or FM). If listening to FM, 1 press the MODE button 3 to turn FM Stereo ®p)/POWER ON button 2 to turn the ( ON or OFF. unit on. 3 3 4 2 1 Press and release the Skip/Search/ Adjust the VOLUME control 1 and DBBS Tuning o 1 or n 2 button
ページ9に含まれる内容の要旨
1 1 1 2 2 2 RADIO OPERATION (CONTINUED) TO SET AND RECEIVE A STATION INTO MEMORY You can set up to 10 AM and 10 FM stations into memory as follows: 1 2 2 1 Tune a desired station as described in While the PROG indicator is blinking, the previous section. Press the PROG select the desired preset using the button; the PROG indicator will blink PRESET UP 1 or DOWN 2 button, and the preset number will appear in then press the PROG button 3 to set the display. the memory. 1 3 2 1 To recall a preset
ページ10に含まれる内容の要旨
1 1 1 1 2 2 2 2 CD OPERATION TO PLAY A CD (Standard, CD-R and CD-RW) 2 1 2 1 Open the CD compartment lid by sliding Press the PLAY/PAUSE (®p)/POWER the CD OPEN switch 1 to the right. ON button to start playback. To pause Gently press a disc, label side up, onto playback, press the PLAY/PAUSE the spindle until it locks in place. Close (®p)/POWER ON button again, the the CD compartment lid. Insert elapsed time will blink. Press once headphones into the PHONES jack. Slide again to resume playback.
ページ11に含まれる内容の要旨
1 1 2 2 CD OPERATION (CONTINUED) NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no disc”. • As each track is played, the track number and elapsed time are shown in the display. • To remove the disc, open the CD compartment, hold the edge of the CD and gently press the center pivot and lift the CD. • The maximum time of a CD is 74 minutes for this unit. •
ページ12に含まれる内容の要旨
1 2 CD OPERATION (CONTINUED) 5 6 If the CD player is subject to vibration If all the bars disappear and the CD during playback, the bars will player is subject to immediate vibration, disappear one by one. During the the unit may skip. vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low. 7 8 I
ページ13に含まれる内容の要旨
1 1 1 1 2 2 2 2 CD OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 2 1 3 1 4 2 With a CD inserted, press the The unit will then play the same track PLAY/PAUSE (®p)/POWER ON over and over until the STOP button 1 to turn the unit on, then select (n)/POWER OFF button 1 is pressed. 4 a track using the Skip/Search/Tuning o Adjust the VOLUME control 2 and 2 or n3 button. Press the MODE DBBS switch 3 as desired. button 4 once; the Repeat 1 indicator ALL will appear in the display. TO REPEATED
ページ14に含まれる内容の要旨
3 3 3 3 4 4 2 2 CD OPERATION (CONTINUED) INTRO PLAY 1 1 2 1 2 With a CD inserted, press the Press the PLAY/PAUSE (®p)/POWER PLAY/PAUSE (®p)/POWER ON ON button 1 to begin playback. The unit button 1 to turn the unit on and press will play the first 10 seconds of each track. the STOP (n)/POWER OFF button 2 Adjust the VOLUME control 2 and to stop auto playback. Press the MODE MBASS switch 3 as desired. Press the button 3 three times; the INTRO STOP (n)/POWER OFF button 4 to stop indicator will blin
ページ15に含まれる内容の要旨
3 1 2 2 CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 24 TRACKS) 2 1 1 2 3 With a CD inserted, press the Select the first track to be played back PLAY/PAUSE (®p)/POWER ON button using the Skip/Search/Tuning o 1 or n 1 to turn the unit on and press the 2 button, then press the PROG button STOP (n)/POWER OFF button 2 to 3 again. Repeat this step to program stop auto playback. Press the PROG additional tracks up to a maximum of button 3; the PROG indicator will appear in the CD display. 24
ページ16に含まれる内容の要旨
C B L E E N A CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit. • If a compact
ページ17に含まれる内容の要旨
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Weak or dead batteries Replace batteries and insert turn on. or inserted incorrectly. correctly. Weak or dead re- Recharge or replace chargeable batteries. batteries (if used). AC adapter Check AC adapter not connected. connection. Disc will not play. CD compartment Close CD compartment. not closed. Disc inserted Reinsert disc correctly. incorr
ページ18に含まれる内容の要旨
SPECIFICATIONS Power requirements......................................2 x LR6 "AA" alkaline battery DC in 4.5V adapter (center positive) Frequency Range (FM) ................................................... 87.5 ~ 108 MHz Frequency Range (AM) ....................................................530 ~ 1720 KHz D/A conversion...................................1-bit DAC eight times oversampling Frequency response ............................................20~20,000Hz (+1,-3 dB) Anti-shock. ....
ページ19に含まれる内容の要旨
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com
