Samson Power Amplifier Servo 4060の取扱説明書

ページ1に含まれる内容の要旨

POWER
SERVO 4060
AMPLIFIER
-+ + - -+ + - SERVO 4060
CAUTION QUAD AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
USE CLASS 2 WIRING
SERIAL NUMBER
-+ +-
-+ +-
4Ω 120W AC 4Ω 120W
CH4 CH3 USA & CANADA 115V - 60Hz CH2 CH1
emc MAX. LOAD MAX. LOAD
INLET
EUROPE & UK 230V - 50Hz
- + + -
650W MAX.
EUR . USA . JPN MONO 8Ω MONO 8Ω
CAUTION: ATTENTION: SAMSON
AVIS; DISCONNECT SUPPLY CORD DEBRANCHER AVANT DE
SAMSON TECHNOLOGIES CORP., U.S.A.
RISQUE DE CHOC ELECTRIQUE BEFORE CHANGING FUSE. REMPLACER LE FUSIBLE.

ページ2に含まれる内容の要旨

SERVO 4060 SPECIFICATIONS ARCHITECT’S & ENGINEER’S SPECIFICATION Output Power (typical all channels driven): The power amplifier, being of four channels, shall 4 Ω , 1 kHz, 1% THD, 86 W deliver a minimum of 60 watts into loads of 4 ohms, or 4 Ω , 1 kHz, .0072% THD, 60 W 120 watts into loads of 8 ohms when in the bridged 8 Ω , 1 kHz, 1% THD, 57 W mode, or 120 watts + 60 watts + 60 watts (one side 8 Ω , 1 kHz, .0046% THD, 47 W bridged). It shall be passively cooled, and shall have inter- 8 Ω bridg