Rolls MixMate 2 RM74の取扱説明書

ページ1に含まれる内容の要旨

USING THE MIC EFFECTS INSERT
In order to add effects to the microphone signal, an insert cable is needed. The Tip of the
plug acts as the Send, the Ring is the Return.
Connect the insert cable’s TRS end to the
Mic FX Insert jack on the rear of the RM74.
Connect the Tip connection to your effects
processor’s Input jack, and the Ring connec-
RM74
tion to the Output of the effects processor.
The RM75 effects insert is mono, so if the
MixMate 2
effects processor is stereo - choose a Mono
outp

ページ2に含まれる内容の要旨

Thank your for your purchase of the Rolls RM74 MixMate 2 Mic / Source Mixer. The RM74 CONNECTION mixes two microphones with up to four stereo source signals such as CD players, karaoke Ensure the RM74 is securely mounted in a 19” rack. Connect the power supply to an AC machines, MP3 Players, etc.. The unit is housed in a compact yet sturdy steel 1U rack outlet (preferrably a power strip with master switch). If the unit is to be used in a perma- chassis. nent install, connect all sources and