ページ1に含まれる内容の要旨
MX-406
Stereo Microphone/Line Mixer
Operating Manual
Ashly Audio Inc.
847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
www.ashly.com
All Trademarks referred to herein, are the property of their respective owners. R-042707
All Rights Reserved
ページ2に含まれる内容の要旨
Page - 2 Operator Manual – MX-406 Mixer This page intentionally left blank Copyright© 2007 – Ashly Audio Inc.
ページ3に含まれる内容の要旨
Operator Manual – MX-406 Mixer Page - 3 Safety Instructions – 3 Important Safety Instructions Introduction - 4 Consignes de sécurité à lire attentivement MX-406 Mixer – 5 Connectors & Cables – 5 Physical Description - 6 Installation – 7 Typical Applications - 8 The lightning flash with arrowhead symbol, within an equilateral triangle, is Le symbole de la flèche dans un triangle équilateral symbolisant la foudre est Factory Configs - 8 intended to alert the user to the presence of uninsulated "da
ページ4に含まれる内容の要旨
Page - 4 Operator Manual – MX-406 Mixer Safety Instructions – 3 Introduction Introduction - 4 MX-406 Mixer – 5 Congratulations on your purchase of an Ashly MX-406 stereo mic/line mixer, a professional, studio quality solution to everday mixing needs. MX-406 features include: Connectors & Cables – 5 6 channels of mic or line inputs Physical Description - 6 mic input pad Installation – 7 TRS insert points Typical Applications - 8 +48V phantom power Factory Configs - 8 On each channel: o Up to
ページ5に含まれる内容の要旨
Operator Manual – MX-406 Mixer Page - 5 Safety Instructions – 3 MX-406 Mixer Introduction - 4 The MX-406 is a versatile rack-mountable mixer capable of supporting the following MX-406 Mixer – 5 applications: Connectors & Cables – 5 Grounding Small Sound Reinforcement Physical Description - 6 Meeting/Board Room or Church Installation – 7 Location Recording or Broadcast Mixing Typical Applications - 8 Sub-mixing in a larger system These applications are discussed in detail on Page 8. Factory C
ページ6に含まれる内容の要旨
Page - 6 Operator Manual – MX-406 Mixer Safety Instructions – 3 Physical Description Introduction - 4 MX-406 Mixer – 5 The MX-406 is 2RU, and weighs 13 pounds. Connectors & Cables – 5 MX-406 Front Panel Physical Description - 6 Front Panel Rear Panel Installation – 7 Typical Applications - 8 Factory Configs - 8 Troubleshooting - 9 Dimensions - 9 1. Input Gain - This three position switch sets the 7. Aux Master Output - This control adjust the operating level of the microphone and line input leve
ページ7に含まれる内容の要旨
Operator Manual – MX-406 Mixer Page - 7 Safety Instructions – 3 MX-406 Rear Panel Introduction - 4 MX-406 Mixer – 5 Connectors & Cables – 5 Physical Description - 6 Front Panel Rear Panel Installation – 7 1. Microphone Input - The MX-406 microphone 6. Stereo Line Out - The stereo line outputs are Typical Applications - 8 input is an active balanced type with a nominal nominal -10dBu "premaster", and are not impedance of 1200 ohms. Performance is best affected by the main Left/Right output contro
ページ8に含まれる内容の要旨
Page - 8 Operator Manual – MX-406 Mixer Safety Instructions – 3 Typical Applications Introduction - 4 MX-406 Mixer – 5 The following information will help you make the most of your new mixer: Connectors & Cables – 5 Small Sound Reinforcement System Physical Description - 6 The MX-406 can be used to mix typical sound sources that might be found in a church, Installation – 7 small club, school theater or similar environment. Four of the input channels are used for vocal microphones, while the rem
ページ9に含まれる内容の要旨
Operator Manual – MX-406 Mixer Page - 9 Safety Instructions – 3 Troubleshooting Introduction - 4 Situation Action MX-406 Mixer – 5 No Sound Check the AC power. Is the power switch on and illuminated? Check the level meters. If they Connectors & Cables – 5 are operating, either the problem is between the mixer and the later components in the Physical Description - 6 system. If there is no meter activity, check to see you really have an input signal and that it is on the desired channel. Check tha
ページ10に含まれる内容の要旨
Page - 10 Operator Manual – MX-406 Mixer Safety Instructions – 3 Specifications Introduction - 4 SPECIFICATION MX-406 DISTORTION MX-406 Mixer – 5 THD at +4 dBu, 20Hz-20KHz <0.05% THD at +12dBu, 30Hz-10KHz <0.05% Connectors & Cables – 5 IMD (SMPTE) at +12dBu <0.05% Physical Description - 6 HUM & NOISE (20Hz-20KHz at max preamp gain) Equivalent input hum and noise <-127dBu Installation – 7 <-100dBu Residual output noise, TRS outputs, all levels at minimum Typical Applications - 8 Aux Out, Aux Mast
ページ11に含まれる内容の要旨
Operator Manual – MX-406 Mixer Page - 11 Safety Instructions – 3 Introduction - 2 Limited Warranty The PE Series - 3 Introduction - 4 Warranty service for this unit will be provided by ASHLY AUDIO INC. in accordance with Physical Description - 4 MX-406 Mixer – 5 the following warrant statement. Connectors & Cables – 5 Installation – 5 Physical Description - 6 Operation – 7 ASHLY AUDIO INC. warrants to the owner of this product that this product and the Troubleshooting - 8 Installation – 7 compon
ページ12に含まれる内容の要旨
Copyright© 2007 – Ashly Audio Inc.
