ページ1に含まれる内容の要旨
DJ MIXER
DJM-400
Operating Instructions
ページ2に含まれる内容の要旨
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.
ページ3に含まれる内容の要旨
CONTENTS FEATURES 1 Designed for high sound quality CONFIRM ACCESSORIES ........................................... 3 Analog signals are sampled at 96 kHz/24-bit, comparable to CAUTIONS REGARDING HANDLING ........................ 3 professional performance levels. Mixing is performed with the same FEATURES ................................................................... 3 type of 32-bit DSP as used in the DJM-1000 and DJM-800, thus eliminating any loss in fidelity, and producing clear and pow
ページ4に含まれる内容の要旨
CONNECTIONS CONNECTIONS CONNECTION PANEL Rear panel Front panel 1 2 3 4 5 6 18 MIC2 MIC1 MONO STEREO AUX(R) AUX(L) POWER MIC AUX OFF ON PHONO PHONO CD CD LINE LINE AC IN 1 2 MASTER SIGNAL GND L L L OUT LINE PHONO LINE PHONO R R R CONTROL CONTROL 17 16 15 14 13 12 11 10 9 8 7 1. POWER switch 12. Channel 2 CD input connectors (CD) RCA type line level input connectors. 2. STEREO/MONO selector switch Use to connect a DJ CD player or other component with line level When switch is set to the [MO
ページ5に含まれる内容の要旨
CONNECTIONS Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections. Headphones CONNECTING INPUTS The front panel PHONES jack can be used to connect headphones with a Ø6.3 mm stereo phone plug. Pioneer DJ CD players STEREO/MONO switch Front panel Connect a DJ CD player’s audio output connectors to one of the channel 1 to 2 CD input connectors, and connect the player’s control cable to the corresponding channel’s CONTROL connector. Set th
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
NAMES AND FUNCTIONS OF PARTS 26 Microphone equalizer control dial (EQ) Beat effect section Use to adjust the tone of microphones 1 and 2. When rotated fully clockwise, attenuation of low-range sound is maximized. When 15 BPM display rotated fully counterclockwise, attenuation of high-range sound is Displays the current track tempo as Beats Per Minute (BPM). maximized. (Adjustable range 0 dB to –12 dB) ¶ The display flashes during BPM calculation and when BPM cannot be calculated. 27 Microphone f
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
EFFECT FUNCTIONS (TYPES OF BEAT EFFECTS) EFFECT FUNCTIONS This unit is equipped with a total of 8 basic effects using beat effects 4. FLANGER and in-loops linked to the BPM. By changing the parameters for each In units of 1/1, 2/1, 4/1, 8/1 or 16/1 beat, 1 cycle of flanger effect effect, a wide variety of new effects can be produced. By using the is produced quickly and easily. BEAT/BANK buttons to set the time parameters, an even wider Example assortment of beat effects can be produced. TYPES O
ページ11に含まれる内容の要旨
EFFECT FUNCTIONS (PRODUCING BEAT EFFECTS/IN-LOOP SAMPLER) 4. Press one of the BEAT/BANK buttons to select the beat to PRODUCING BEAT EFFECTS which you wish to synchronize the effect. ¶ Values can be selected from [1/2, 3/4, 1/1, 2/1, 4/1] or [1, 2, 4, 8, 16]. (The multiple differs depending on the effect. See page 10 for details.) BEAT EFFECTS ¶ The selected button will light. BPM ¶ The effect time corresponding to the beat’s multiple is set AUTO automatically. 1 1 1 AUTO 2 Example: When BPM=120
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
TROUBLESHOOTING TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use. If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center. Symptom Possible Cause Remedy No power ÷ The power cord is not
ページ14に含まれる内容の要旨
SPECIFICATIONS SPECIFICATIONS 1.General 3. Input/output connector systems Power source .............................................................. AC 120 V, 60 Hz PHONO/LINE input connectors Power consumption ..................................................................... 13 W RCA pin jacks .................................................................................. 2 Operating temperature .................... +5 °C to +35 °C (+41 °F to +95 °F) CD input connectors Operating humidi
ページ15に含まれる内容の要旨
BLOCK DIAGRAM BLOCK DIAGRAM [CH-1] [MASTER OUTPUTS] RIAA MUTE PHONO PHONO1/LINE1 MASTER TRIM Master out DAC /LINE OUT 1 ADC CH-1 CD1 PHONO MASTER LINE OUT 2 CD [CH-2] [HEADPHONES] RIAA MUTE PHONO PHONO2/LINE2 TRIM H.P out DAC /LINE PHONES ADC CH-2 CD2 PHONO DSP LINE CD [MIC/AUX] CPU MIC 1 LEVEL MIC 1/ AUX L SWITCHES MIC 1 & AUX L MIC 1 INDICATORS ADC MIC 2 MIC 2 LEVEL MIC 2/ SDRAM AUX R MIC 2 AUX R CH1 Fader Cross Fader DSP BPM 3-Band BEAT CUE BEAT CH1 Monitor EFFECTS CH-1 detect EFFECTS [CH1] E
ページ16に含まれる内容の要旨
