ページ1に含まれる内容の要旨
Turbo16/4 Token Ring Network ISA Adapter
72H3482
Installation Guide
ページ2に含まれる内容の要旨
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
ページ3に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Requirements Workgroups • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96] • Microsoft Windows for Workgroups 3.11 media. • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Interrupt 3 • I/
ページ4に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has completed, select “OK”. 12 At the “Installation Log” screen, select “Close”. 13 When the LANAID v2.20 for Turbo 16/4 Token-Ring ISA screen comes up, chose “Adapter C
ページ5に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra VL8 Vectra VE7/VE8 Adapter Mode Auto16 Compatible - Configuration Automatic - Interrupt 10 3
ページ6に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a Click on "Next" to provide the driver, then click on "Other Locations." b Insert the IBM Turbo 16/4 Token-Ring ISA Adapter diskette 2 of 4, set the pat
ページ7に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\”). 18 Click on “YES” to complete installation and restart t
ページ8に含まれる内容の要旨
1 Connecting to a Netware 3.12 Server Windows 95 SR2
ページ9に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Requirements Workgroups • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96 • Microsoft Windows for Workgroups 3.11 media. • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Interrupt 3 • I/
ページ10に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has completed, select “OK”. 12 At the “Installation Log” screen, select “Close”. 13 When the LANAID v2.20 for Turbo 16/4 Token-Ring ISA screen comes up, chose “Adapter C
ページ11に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra VL8 Vectra VE7/VE8 Interrupt 10 3 I/O Address A20 EFC-EFF Adapter Mode Auto16 Compatible - Con
ページ12に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a Vectra VL8, go directly to step 9. a Click on "Next" to provide the driver, then click on "Other Locations." b Insert the IBM Turbo 16/4 Token-Ring ISA Adapter diskette 2 of 4, set the path
ページ13に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\”). 18 Click on “YES” to complete installation and restart t
ページ14に含まれる内容の要旨
2 Connecting to a Netware 4.11 Server Windows 95 SR2
ページ15に含まれる内容の要旨
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Requirements Workgroups • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols. Device Configuration Vectra
ページ16に含まれる内容の要旨
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon. 8 Select “Networks” and choose “Install Microsoft Windows Network:” and click on “OK.” 9 Click on “Drivers” and then on “Add Adapter.” 10 With “Unlisted or Updated Net
ページ17に含まれる内容の要旨
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” ❒ IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] ❒ Microsoft NetBEUI ❒ IPX/SPX Compatible Transport with NetBIOS 14 At the “Network Setup” dialog box, click “OK.” 15 Set your User Name, Workgroup, and Computer Name and click “OK.” (If you do not have the required information, contact
ページ18に含まれる内容の要旨
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Adapter Mode Auto16 Compatible • Configuration Automatic • Interrupt 10 • I/O Address A20
ページ19に含まれる内容の要旨
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.” 11 Double-Click the “Network” icon and click on “Add.” 12 Select to add an “Adapter”, click on “Add” and then click on “Have Disk.” 13 In the “Install From Disk” window, insert the IBM TR drivers disk 2 of 4, set the path to “A:\” and click on “OK.” (For HP preloaded hard disk drives, set the path to “C:\Masters\LAN\TRBO164\”) 14 Select the “
ページ20に含まれる内容の要旨
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 Windows NT Requirements Workstation • HP Vectra with Windows NT Workstation 3.51 installed. Version3.51 • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51 media. • Microsoft NT 3.51 server that supports Net BEUI, TCP/IP, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Interrupt 3 • I/O Addr
