ページ1に含まれる内容の要旨
GigaPACK
Remote Display /
Terminal Link
USER’S MANUAL
Publication Number: PD008310103.001 AB
MAN-GIGAPACK
GigaPACK
ページ2に含まれる内容の要旨
This user’s manual describes a product that, due to its nature, cannot describe a particular applica- tion. The content of this user’s manual is furnished for informational use only, is subject to change without notice, and should not be constructed as a commitment by Inova Computers GmbH. Inova Computers GmbH assumes no responsibility or liability for any errors or inaccuracies that may appear in this user’s manual. Except as otherwise agreed, no part of this publication may be reproduced, stor
ページ3に含まれる内容の要旨
GigaPACK Preface Preface GigaPACK Contents Unpacking and Special Handling Instruc- tions............................................... 3 Revision History ............................... 4 Two Year Limited Warranty ................ 5 1.0 Inova GigaPACK ...................... 1-2 1.1 Getting Started ...................... 1-2 1.10 Preparing Your Computer ........................................................................ 1-2 1.11 Installing the GigaCHAMPION ..................................
ページ4に含まれる内容の要旨
Preface GigaPACK 3.0 PCI-MMEDIA - GigaHUB........... 3-2 3.00 Features ................................................................................................... 3-2 3.1 Specifications ......................... 3-3 3.2 Typical Configuration Overview .. 3-4 3.20 Professional OEM Integration ................................................................... 3-4 Figure 3.20 Professional GigaHUB Implementation ..................................................................... 3-4 3.21 C
ページ5に含まれる内容の要旨
GigaPACK Preface Unpacking and Special Handling Instructions This product has been designed for a long and fault-free life; nonetheless, its life expectancy can be severely reduced by improper treatment during unpacking and installation. Observe standard antistatic precautions when changing piggybacks, ROM devices, jumper set- tings etc. If the product contains batteries for RTC or memory backup, ensure that the board is not placed on conductive surfaces as these can cause short circuits, damage
ページ6に含まれる内容の要旨
Preface GigaPACK Revision History Revision History Manual MAN-GIGAPACK Publication Number PD008310103.XXX Issue Brief Description of Changes Author Date of Issue PD008310103.001 Preliminary; First Release; All pages Revised AB 23/10/02 Page 0-4 ©2002 Inova Computers GmbH Doc. PD008310103.001
ページ7に含まれる内容の要旨
GigaPACK Preface Two Year Limited Warranty Inova Computers (‘Inova’) grant the original purchaser of Inova products the following hardware warranty. No other warranties that may be granted or implied by anyone on behalf of Inova are valid unless the consumer has the expressed written consent of Inova. Inova warrants their own products (excluding software) to be free from defects in workmanship and materials for a period of 24 consecutive months from the date of purchase. This warranty is not tra
ページ8に含まれる内容の要旨
GigaPACK Getting Started 1 GETTING STARTED Overview Contents 1.0 Inova GigaPACK ...................... 1-2 1.1 Getting Started ...................... 1-2 1.10 Preparing Your Computer ........................................................................ 1-2 1.11 Installing the GigaCHAMPION ................................................................. 1-3 1.2 Software Installation................ 1-6 1.20 Microsoft Windows®XP or Windows®2000.............................................. 1-6
ページ9に含まれる内容の要旨
Getting Started GigaPACK 1.0 Inova GigaPACK The Inova GigaPACK comprises two completely separate hardware components that are dealt with in this user’s manual:- ® 1.) GigaCHAMPION - the ATI Radeon™ VE-based PCI graphic board with internal USB routing ) and GigaST R transmission technology and ® ) 2.) GigaHUB itself - a small desktop receiver unit with GigaST R receiver, built-in USB hub for up to 4 devices and one DVI-D interface for flat-panel monitor connection. Note: A variation on the theme
ページ10に含まれる内容の要旨
GigaPACK Getting Started 1.11 Installing the GigaCHAMPION Now that the computer has ben prepared, you are ready to install the PCI GigaCHAMPION graph- 1 ics accelerator board. Follow these hardware instructions carefully to ensure installation is correct. 1 VIDEO OUTPUT CONNECTOR DISPLAY CABLE Remove the power from your computer and ensure that the power cord is no longer connected. Disconnect the display connector for the existing graphics board (if installed) POWER SUPPLY 2 Remove the cover -
ページ11に含まれる内容の要旨
Getting Started GigaPACK 3 SCREW H EXISTING GRAPHICS CARD Remove any existing graphics board from your computer (if the GigaCHAMPION is designed to replace it!) or disable the on-board graphics capability on the motherboard. You may have to refer the documentation that came with your computer to perform this step. If removing an existing PCI card remember to save the locking screw. 4 IONVA GigaCHAMPION™ VIDEO CARD PCI SLOT Locate the PCI graphics slot and if necessary, remove the metal dust cove
ページ12に含まれる内容の要旨
GigaPACK Getting Started 5 1 SCREW INOVA GigaCHAMPION™ VIDEO CARD Use the included 1.5m length of USB A-B cable to connect the PCs external USB to the GigaCHAMPION face-plate. Ensure that the bank of switches on SW1 are correctly set - Switch 2 ‘ON’ is the default setting and configures the remotely connected display as the boot monitor. 6 DISPLAY CABLE 15-PIN D-DUB 9-PIN D-DUB TO LOCAL VGA TO GigaHUB Now replace the PCI board fixing screw and the computer cover. ) The Inova GigaCHAMPION has a l
ページ13に含まれる内容の要旨
Getting Started GigaPACK 1.2 Software Installation ® ® 1.20 Microsoft Windows XP or Windows 2000 New hardware will be detected after you restart your computer. To complete the setup you must click ‘Yes’ when prompted to restart the computer. ® ® 1.21 Windows XP or Windows 2000 Driver ® ® With Windows XP or Windows 2000 running on your computer, you need to install the Inova driver to take advantage of the higher performance, resolutions and the special graphic features afforded by the GigaCHAMPI
ページ14に含まれる内容の要旨
GigaCHAMPION Product Overview Product Overview 2 GigaCHAMPION 2.0 GigaCHAMPION ...................... 2-2 2.00 Features ................................................................................................... 2-2 2.1 Specifications ......................... 2-3 2.2 Interfaces............................... 2-4 Figure 2.2 Key Interfaces ............................................................................................................ 2-4 Table 2.2 Inova GigaCHAMPION Interface
ページ15に含まれる内容の要旨
Product Overview GigaCHAMPION 2.0 GigaCHAMPION The Inova GigaCHAMPION is an advanced 32-bit PCI remote terminal controller based around the highly integrated ATI Radeon VE graphic engine. Addressing the needs of the next generation commercial or domestic applications, the GigaCHAMPION with its integrated MPEG-2 hardware decoder, USB hub, and a rich feature set is able to control remote (digital) terminals with resolu- tions up to 1024 x 768 pixels some 35m from the host CPU. The local analog VGA
ページ16に含まれる内容の要旨
GigaCHAMPION Product Overview 2.1 Specifications Interface 32-bit/33MHz universal PCI interface with full Plug&Play compatibility Video Contr. ATI Radeon with 32MByte, 150MHz RAM Screen Options Resolution Colour Depth Refresh 2 (analog VGA) 1920 x 1200 32-bit 72Hz 1920 x 1200 16-bit 80Hz 2048 x 1536 16-bit 60Hz ) GigaST R INGT165 Transmitter for video signal transmission USB Hub USB 1.1 used for up to 4 PC peripheral and pointing devices User 15-pin D-Sub for VGA ) Interfaces 9-pi
ページ17に含まれる内容の要旨
Product Overview GigaCHAMPION 2.2 Interfaces Figure 2.3 shows the physical location of the key interfaces which are explained in Table 2.2. Figure 2.2 Key Interfaces SW1 J5 J4 J33 J3 Table 2.2 Inova GigaCHAMPION Interfaces Interface Description J3 Local analog VGA video connector J33 Integrated GigaST(R and USB interfaces J4 External USB-B connection (for USB routing) J5 USB-B for internal USB (Motherboard) connection SW1 1, 3 & 4 N/C External USB-B connection (for USB routing) On Boot display i
ページ18に含まれる内容の要旨
GigaCHAMPION Product Overview 2.3 Face-Plate Figure 2.3 shows the interfaces appearing on the steel face-plate. Figure 2.3 Face-Plate Interface and Connector Pinout 2 10 15 5 9 5 6 1 11 1 21 6 21 34 34 Doc. PD008310103.001 ©2002 Inova Computers GmbH Page 2-5 GigaCHAMPION
ページ19に含まれる内容の要旨
Product Overview GigaCHAMPION 2.30 Connector Pinout Figure 2.3 shows the physical face-plate connectors on the Inova GigaCHAMPION graphic accel- erator. Table 2.30 gives the pinout and description of these connectors. Table 2.30 Connector Pinout and Pin Description Pin No. Signal 1 Analog RED 2 Analog GREEN 3 Analog BLUE 4 N/C 5, 6, 7, 8 CRT Ground 9 +5V (DDC Data) 10 CRT Ground 11 N/C 12 DDC-SDA 13 HSYNC 14 VSYNC 15 DDC-SCL Pin No. Signal 1 GigaSTAR Tx+ 2 Data 1+ 3 GND 4 Data 2+ 5 N/C 6 GigaSTA
ページ20に含まれる内容の要旨
GigaHUB Product Overview Product Overview GigaHUB 3 3.0 PCI-MMEDIA - GigaHUB........... 3-2 3.00 Features ................................................................................................... 3-2 3.1 Specifications ......................... 3-3 3.2 Typical Configuration Overview .. 3-4 3.20 Professional OEM Integration ................................................................... 3-4 Figure 3.20 Professional GigaHUB Implementation .............................................
