ページ1に含まれる内容の要旨
OWNER’S MANUAL
WiFi Network
Blu-ray Disc™ Player
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
BD570
P/NO : MFL62881812
www.lgusa.com
B BD572-N-BUSALLK-ENG.indd 1 D572-N-BUSALLK-ENG.indd 1 2010.2.1 4:42:53 PM 2010.2.1 4:42:53 PM
ページ2に含まれる内容の要旨
BD572-N-BUSALLK-ENG.indd 2 BD572-N-BUSALLK-ENG.indd 2 2 2010.2.1 4:42:54 PM 010.2.1 4:42:54 PM
ページ3に含まれる内容の要旨
Safety Information Safety Information 3 1 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK CAUTION: This product employs a Laser System. DO NOT REMOVE COVER (OR BACK) NO USER- To ensure proper use of this product, please read SERVICEABLE PARTS INSIDE REFER SERVICING TO this owner’s manual carefully and retain it for future QUALIFIED SERVICE PERSONNEL. reference. Shall the unit require maintenance, contact an authorized service c
ページ4に含まれる内容の要旨
Safety Information 4 Safety Information This device is equipped with a portable battery or • Connect the equipment into an outlet on a accumulator. circuit diff erent from that to which the receiver is connected. Safety way to remove the battery or the battery from the equipment: Remove the old battery • Consult the dealer or an experienced radio/TV 1 or battery pack, follow the steps in reverse order technician for help. than the assembly. To prevent contamination of CAUTION: Any changes
ページ5に含まれる内容の要旨
Safety Information Safety Information 5 Notes on Copyrights IMPORTANT SAFETY • Because AACS (Advanced Access Content System) is approved as content protection system for BD INSTRUCTIONS format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are 1 1. Read these instructions. imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this 2. Keep these instructions. product and restrictions on this product may vary 3.
ページ6に含まれる内容の要旨
6 Contents 3 Installation 14 Connecting to Your TV 14 HDMI Connection 15 What is SIMPLINK? 1 16 Component Video Safety Information Connection 16 Video/Audio (Left/Right) 3 Cautions and Warnings Connection 17 Resolution Setting 18 Connecting to an Amplifi er 2 18 Connecting to an Amplifi er Preparation via HDMI Output 8 Introduction 19 Connecting to an Amplifi er via Digital Audio Output 8 About the “ ” Symbol Display 19 Connecting to an Amplifi er via 2 Channel Audio Output 8 Symbols Used in
ページ7に含まれる内容の要旨
7 4 6 Operation Troubleshooting 34 General Playback 74 General 1 36 Advanced Playback 75 Picture 39 On-Screen display 75 Sound 42 Enjoying BD-LIVE 76 Network 43 Playing a movie fi le and VR disc 2 43 Selecting a subtitle fi le 7 44 Changing subtitle code page Appendix 44 Viewing a photo 77 Controlling a TV with the Supplied 3 45 Options while viewing a Remote Control photo 78 Network Software Update 46 Listening to music while 80 Area Code List slide show 81 Language code List 47 Listening
ページ8に含まれる内容の要旨
Preparation 8 Preparation 2 Preparation Video fi les in the DLNA 2 Introduction MOVIE-N server or PC Audio fi les contained in MUSIC the USB/Disc About the “ ” Symbol Display Audio fi les in the DLNA MUSIC-N “ ” may appear on your TV display during server or PC operation and indicates that the function PHOTO Photo fi les explained in this owner’s manual is not available on that specifi c media. Supplied Accesorries Symbols Used in this Manual NOTE Indicates special notes and operating fea
ページ9に含まれる内容の要旨
Preparation Preparation 9 Playable Discs NOTE Blu-ray Disc • Depending on the conditions of the recording - Discs such as movies that can equipment or the CD-R/RW (or DVD±R/RW) be purchased or rented. disc itself, some CD-R/RW (or DVD±R/RW) discs - BD-R/RE discs that contain cannot be played on the unit. Movie, Music or Photo fi les. • Depending on the recording software & the DVD-VIDEO (8 cm / 12 cm disc) fi nalization, some recorded discs (CD-R/RW, DVD ±R/RW, BD-R/RE) may not be playable
ページ10に含まれる内容の要旨
Preparation 10 Preparation File compatibility NOTE Overall • HD video fi les contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB Available File extensions: “.jpg”, “.jpeg”, “.png”, “ 2.0 are recommended to play back HD video .avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, fi les. “.wma”, “.wav” • This player supports H.264/MPEG-4 AVC profi le • Available fi le extensions diff er depending Main, High at Level 4.1. For a fi le with higher on the DLNA servers.
ページ11に含まれる内容の要旨
Preparation Preparation 11 For Dolby® Digital Plus, Dolby TrueHD and DTS- Regional Code HD multi-channel audio playback: This unit has a regional code printed on the • An amplifi er/receiver with a built-in (Dolby rear of the unit. This unit can play only BD-ROM Digital, Dolby Digital Plus, Dolby TrueHD, or DVD discs labeled same as the rear of the DTS or DTS-HD) decoder. unit or “ALL”. • Main, center, surround speakers and subwoofer as necessary for chosen format. AVCHD (Advanced Video C
ページ12に含まれる内容の要旨
Preparation 12 Preparation Remote control • • • • • • • • • • • • Direction buttons: Selects an a option in the menu. 1 (POWER): Switches the ENTER ( ): Acknowledges player ON or OFF. menu selection. Z (OPEN/CLOSE): Opens and RETURN ( ): Exits the menu O closes the disc tray. 2 or resumes playback. The 0-9 numerical buttons: resume play function may not Selects numbered options in work depending on the BD- a menu or inputs letters in the ROM disc. keypad menu. TITLE/POP-UP
ページ13に含まれる内容の要旨
Preparation Preparation 13 Front panel 2 Disc Tray N/X (PLAY / PAUSE) a f Z (OPEN/CLOSE) x (STOP) b g 1 (POWER) Button ./> (SKIP) c h Display Window USB Port d i Remote Sensor e Rear panel AC power cord LAN port a e DIGITAL AUDIO OUT (COAXIAL) HDMI OUT (Type A, Version 1.3) b f VIDEO OUT DIGITAL AUDIO OUT (OPTICAL) c g 2CH AUDIO OUT (Left/Right) COMPONENT VIDEO OUT (Y PB PR) d h BD572-N-BUSALLK-ENG.indd 13 BD572-N-BUSALLK-ENG.indd 13 2 2010.2.1 4:42:58 PM 010.2.1 4:42:58 PM
ページ14に含まれる内容の要旨
Installation 14 Installation 3 Installation HDMI Connection Connecting to Your TV If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, Version 1.3). Connect the HDMI jack Make one of the following connections, on the player to the HDMI jack on a HDMI depending on the capabilities of your existing 3 compatible TV or monitor. equipment. • HDMI connection (page 14-15) HDMI Connection • Component Video connection (page 16) • Video connection (page 16
ページ15に含まれる内容の要旨
Installation Installation 15 What is SIMPLINK? NOTE • If a connected HDMI device does not accept the audio output of the player, the HDMI device Some functions of this unit are controlled by ’s audio sound may be distorted or may not output. the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through • When you use HDMI connection, you can HDMI connection. change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.) Controllable functio
ページ16に含まれる内容の要旨
Installation 16 Installation Component Video Connection Video/Audio (Left/Right) Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on Connect the VIDEO OUT jack on the player to the TV using component video cable. Connect the video in jack on the TV using a video cable. the left and right AUDIO OUT jacks of the Connect the left and right AUDIO OUT jacks of player to the audio left and right IN jacks on the player to the audio left and right
ページ17に含まれる内容の要旨
Installation Installation 17 Resolution Setting NOTE The player provides several output resolutions • If your TV does not accept the resolution you for HDMI OUT and COMPONENT VIDEO OUT have set on the player, you can set resolution to jacks. You can change the resolution using 480p as follows: [Setup] menu. 1. Press Z to open the disc tray. 1. Press HOME ( ). 2 Press x (STOP) for more than 5 seconds. Ii 2. Use / to select the [Setup] and press • Since several factors aff ect the resolution
ページ18に含まれる内容の要旨
Installation 18 Installation Connecting to an Amplifi er via Connecting to an HDMI Output Amplifi er Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifi er using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on Make one of the following connections, pages 29-30.) depending on the capabilities of your existing equipment. HDMI Connection • HDMI Audio connection (page 18) • Digital Audio connection (page 19) • 2CH Analog
ページ19に含まれる内容の要旨
Installation Installation 19 Connecting to an Amplifi er via Connecting to an Amplifi er via Digital Audio Output 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT Connect the Left and Right 2CH AUDIO OUT jack to the corresponding in jack (OPTICAL or jacks on the player to the audio left and right COAXIAL) on your amplifi er. Use an optional in jacks on your amplifi er, receiver, or stereo digital audio cable. You will need to activate system using audio cables. the player’s digit
ページ20に含まれる内容の要旨
Installation 20 Installation Connecting to your Wired Network Connection Home Network Router/Modem This player can be connected to a local area network (LAN) via the LAN port on the rear Broadband panel or the internal wireless module. service By connecting the unit to a broadband home network, you have access to services such as software updates, Home Link, BD-LIVE interactivity and streaming services. PC 3 Wired network connection Using a wired network provides the best performance,
