ページ1に含まれる内容の要旨
Installation Guide
PC1 Power Controller, 10 A (110 VAC only)
Overview
PCI Product Specifications (Cont.)
The PC1 (FG670) is a 10-Amp Power Controller for 110 VAC (FIG. 1).
Enclosure: Metal with black matte finish.
AC1 (remote operation) Control Mode
Dimensions (HWD) 1.5" x 5.5" x 5.5" (3.81 cm x 13.97 cm x 13.97 cm)
Pushbutton DIP Switch
Weight 28 oz. (793.79 g)
Included Power Cord - 6 ft. (1.83 m), with 3-wire grounded plug.
Accessories
Other AMX AC-RK Rack Mount Kit (FG515)
Equipment
WARNIN
ページ2に含まれる内容の要旨
DIP Switch Settings The 4-position DIP Switch on the front panel is used to set the mode of operation for the AC1 (remote operation) pushbutton (FIG. 3). FIG. 3 DIP Switch and AC1 Remote Operation Pushbutton The settings are shown below: AC1 Momentary (Default) Switch Setting (Down = On) 1ON 1 23 4 2ON 3ON 4ON AC1 Latching Switch Setting (Down = On) 1OFF 1 23 4 2OFF 3ON 4ON Discrete ON/OFF Switch Setting (Down = On) 1ON 1 23 4 2OFF 3OFF 4ON For full warranty information, refer to the AM
