ページ1に含まれる内容の要旨
Installation and User Guide
NDT-VKP/-ME Virtual Keypad
• While the NDT-VKP-ME user interface is optimized for use with the iPhone
Overview
and iPod Touch (screen resolution: 480×320 pixels at 163 ppi, with 3:2
Virtual Keypad provides a simple web-based user interface for NetLinx control
aspect ratio), it is suitable for use with any web-enabled mobile phone.
systems which can be used in a wide range of control environments. You can
• Your iPhone / iPod Touch must have OS v2.1 or greater in o
ページ2に含まれる内容の要旨
Changing the Button Text Channel Codes 1. In NetLinx Studio, locate the DATA_EVENT section. Channel codes correspond to the number of each button on the keypad. For example, the channel code for button 1 is 1. 2. Enter the following line of code: The same logic applies for all 12 buttons on the keypad. SEND_COMMAND VIRTUALKEYPAD, "'LABELx-'" where: Instantiating Virtual Keypad Module • x corresponds to the number of the button on the user interface Instantiate the Virtual Keypad module
