Bard PA13421-Bの取扱説明書

デバイスBard PA13421-Bの取扱説明書

デバイス: Bard PA13421-B
カテゴリ: エアコン
メーカー: Bard
サイズ: 0.59 MB
追加した日付: 4/22/2014
ページ数: 23
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスBard PA13421-Bの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Bard PA13421-Bに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Bard PA13421-Bをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Bard PA13421-Bのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Bard PA13421-Bの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Bard PA13421-B 取扱説明書 - Online PDF
Advertisement
« Page 1 of 23 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Bard PA13421-Bを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Bard PA13421-Bの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

INSTALLATION INSTRUCTIONS
SINGLE PACKAGE
AIR CONDITIONERS
MODELS
PA13241-A PA13301-A
PA13361-A PA13361-B
PA13421-A PA13421-B
PA13481-A PA13481-B
PA13601-A PA13601-B
Bard Manufacturing Company Manual : 2100-467
Supersedes: NEW
Bryan, Ohio 43506
File: Volume II Tab 10
Since 1914 . . . Moving ahead just as planned
Date: 03-03-06
Manual 2100-467
© Copyright 2006
Page 1 of 23

ページ2に含まれる内容の要旨

CONTENTS Getting Other Informations and Publications ........ 3 Start Up and Operation General .............................................................. 15 General Instructions Topping Off System Charge................................... 15 Important ................................................................ 4 Safety Practices..................................................... 15 Shipping Damage .................................................... 4 Start Up Notes ..................

ページ3に含まれる内容の要旨

Getting Other Information and Publications These publications can help you install the air FOR MORE INFORMATION, CONTACT conditioner or heat pump. You can usually find these at THESE PUBLISHERS: your local library or purchase them directly from the publisher. Be sure to consult current edition of each ACCA Air Conditioning Contractors of America standard. 1712 New Hampshire Ave. N.W. Washington, DC 20009 Telephone: (202) 483-9370 National Electrical Code ...................... ANSI/NFPA 70 Fax

ページ4に含まれる内容の要旨

GENERAL INSTRUCTIONS FIELD INSTALLED HEATER PACKAGES IMPORTANT (OPTIONAL) The equipment covered in this manual is to be installed These packaged air conditioners are manufactured by trained, experienced service and installation without supplementary electric heaters. Supplementary technicians. All duct work, supply and return ducts, heaters are available for simple, fast field installation. must be properly sized for the design air flow requirement of the equipment. ACCA is an excellent A sep

ページ5に含まれる内容の要旨

Manual 2100-467 Page 5 of 23 TABLE 2 ELECTRICAL SPECIFICATIONS MA odel PA A13241-PA A13301-PB A13361-PA A13361-PB A13421-PA A13421-PB A13481-PA A13481-PB A13601- PA13601- Electric Rating – 21 30/208-60-121 30/208-60-23 30/208-60-21 30/208-60-23 30/208-60-21 30/208-60-23 30/208-60-21 30/208-60-23 30/208-60- 230/208-60- 60 Hz – Circuit A O3 perating Voltage Range13 97 - 2513 97 - 2513 97 - 2513 87 - 2513 97 - 2513 87 - 2513 97 - 2513 87 - 2513 97 - 25 187 - 25 M5 inimum Circuit Ampacity 181427113

ページ6に含まれる内容の要旨

Manual 2100-467 Page 6 of 23 TABLE 3 OPTIONAL FIELD INSTALLED HEATER PACKAGES ONLY TO BE USED WITH THE MODELS INDICATED Heater Package Volts & ModelPA hasePA A13241-PA A13301-PB A13361-PA A13361-PB A13421-PA A13421-PB A13481-PA A13481-PB A13601- PA13601- E1 HP313-A05240/208- XXX E1 HP313-A10240/208- XXX E1 HP313-A152X 40/208- X E3 HP313-B092X 40/208- E3 HP313-B152X 40/208- E1 HP513-A052X 40/208- XX E1 HP513-A102X 40/208- XX E1 HP513-A152X 40/208- XX E3 HP513-B09 240/208- XXX E3 HP513-B15 240/2

ページ7に含まれる内容の要旨

Manual 2100-467 Page 7 of 23 TABLE 4 OPTIONAL FIELD INSTALLED ELECTRIC HEATER TABLE Htr. KW & Capacity Htr. KW & Capacity Circuit B @ 240 Volts @ 208 Volts Heater Heater 240/208V Unit Volts Internal 3 1 2 2 Package Htr. Phases Circuit No. Field Min. Max. Over Field Model No. Amps KH WBW TU KH BTU Breaker Circuits Circuit Current Power Ground Ampacity Protection Wiring Wire Size E1 HP313-A0525 40/208- 15 7,10030 .711 2,80 20.8/18. 1325 6/2 30 0/2 10 0/1 1 E1 HP313-A1020 40/208-1030 4,1070 .522 6

ページ8に含まれる内容の要旨

FIGURE 1 DIMENSIONS OF UNITS W L A D E B Compressor access door Control panel door High voltage knockout Low voltage knockout Heater package knockout Supply opening C Heater package access panel Drain access Return opening F Condenser fan H Condenser air intake grille Blower motor access door 47 11/16" G Condenser air intake grille Unit Dimension Chart Supply Size Return Size Unit Overall Dimensions Unit General Dimensions Unit A C B C H (height) L (length) W (width) D E F G PA/PH1324,1330,1336

ページ9に含まれる内容の要旨

INSTALLATION In roof top installation, as in all installations, the air LOCATION conditioner must be level from side to side. GENERAL However, the unit should have a pitch along the length to assure complete external drainage of The unit must be located outside, or in a well ventilated precipitation and of defrost condensate. area. It must not be in the space being heated or cooled. A sound absorbing material should be considered if the 2. CRAWL SPACE – Duct work installed in crawl unit is to

ページ10に含まれる内容の要旨

FIGURE 2 SLAB MOUNTING AT GROUND LEVEL Side Air Outlet The distance between View outside wall and unit 1 inch clearance varies with installation between duct and requirements. Package Unit any combustible material if distance between outside wall and unit is less Supply Duct than 3 feet (needed on electric heat Mounting Slab units only). Return Duct 1/4 inch per foot slope away from building Ground Level Building FIGURE 3 AIRFLOW AND SERVICE ACCESS CLEARANCES Nearest Structure Top Compressor C

ページ11に含まれる内容の要旨

FIGURE 4 ELEVATED MOUNTING PLATFORM * 12" min. if in Platform can be as 32°F or lower climate shown or solid Both legs must rest 48" min. on surface of platform Poured concrete, brick, or block * 12" min. if in 32°F or lower climate Both legs must rest Metal frame 48" min. on surface of platform MIS-2144 * AS REQUIRED Manual 2100-467 Page 11 of 23

ページ12に含まれる内容の要旨

5. OTHER INSTALLATIONS – Many other Prior thought should be given to return air location and installations are possible with the packaged air placement of the air filter(s). The air filter(s) must be of conditioner. No matter what the installation, always adequate size and readily accessible to the operator of consider the following facts: the equipment. Filters must be adequate in size and properly maintained for proper operation. If this is not A. Insure that the discharge air is not obst

ページ13に含まれる内容の要旨

TABLE 6 WIRING – MAIN POWER THERMOSTAT WIRE SIZE Refer to the unit rating plate for wire sizing information and maximum fuse size. Each outdoor unit is marked Maximum Distance with a “Minimum Circuit Ampacity”. This means that TA ransformer VAFe L Wire Gaug In Feet the field wiring used must be sized to carry that amount of current. If field installed heaters are added to the 20 45 basic unit, a second separate power supply circuit will 18 60 be required. The heater rating plate located a

ページ14に含まれる内容の要旨

FIGURE 6 LOW VOLTAGE WIRING Thermostat Subbase W3 E2 C GR Y1 Y2 B W2 W1 L E D A1 P IF93-380 OR C G B W2 R Y W1 L E T8511G1070 OR T8400C1313 G R Y W Unit 24V C GR Y1 B W1 W2 Y W3 DH D1 L E Terminal Block REMOVE JUMPER FOR 2 STAGE ELECTRIC HEAT ON UNITS WITH 15 OR MORE KW Unit Control Panel MIS-2149 Manual 2100-467 Page 14 of 23

ページ15に含まれる内容の要旨

START UP These units require R-410A refrigerant and polyolester SAFETY PRACTICES: oil. 1. Never mix R-410A with other refrigerants. 2. Use gloves and safety glasses, polyolester oils can GENERAL: be irritating to the skin, and liquid refrigerant will 1. Use separate service equipment to avoid cross freeze the skin. contamination of oil and refrigerants. 3. Never use air and R-410A to leak check; the 2. Use recovery equipment rated for R-410A mixture may become flammable. refrigerant. 4. Do not i

ページ16に含まれる内容の要旨

START UP AND OPERATION position and the blower is already in operation, then the THREE PHASE SCROLL COMPRESSOR START UP INFORMATION motor will ramp up to the required speed for cooling. (PA1336, 42, 48 and 60 Models) HEATING (1st Stage) – On a call for heating from the room thermostat (circuit R-W1 makes), the blower Scroll compressors, like several other types of will energize (circuit R-G is automatic when R-W1 compressors, will only compress in one rotational makes). This will place the sy

ページ17に含まれる内容の要旨

HIGH PRESSURE SWITCH AND LOCKOUT LOW AMBIENT CONTROL SEQUENCE (Standard Feature) If the high pressure switch opens, the compressor Optional Low Ambient Control contactor will de-energize immediately. The lockout An optional low ambient control is available for both timer will go into a soft lockout and stay in soft lockout factory and field installed options. The low ambient until the high pressure switch closes and the delay-on- control is to be applied to the PA13 Series models when make ti

ページ18に含まれる内容の要旨

SERVICE AND TROUBLESHOOTING SERVICE HINTS FAN BLADE SETTINGS 1. Caution homeowner to maintain clean air filters at Shown in Figure 8 are the correct fan blade setting all times. Also, not to needlessly close off supply dimensions for proper air delivery across the outdoor and return air registers. This reduces air flow coil. through the system which shortens equipment Any service work requiring removal or adjustment in service life as well as increasing operating costs. the fan and/or motor ar

ページ19に含まれる内容の要旨

– Reinsert tube into fitting. SUCTION AND DISCHARGE TUBE BRAZING – Heat tube uniformly in Area 1 moving slowly to Compliant Scroll compressors have copper plated steel Area 2. When joint reaches brazing suction and discharge tubes. These tubes are far more temperature, apply brazing material. (See rugged and less prone to leaks than copper tubes used on Figure 9) other compressors. Due to different thermal properties – Heat joint uniformly around the circumference of steel and copper, brazin

ページ20に含まれる内容の要旨

™ TROUBLESHOOTING GE ECM MOTORS CAUTION: Symptom Cause/Procedure • Noisy blower or cabinet • Check for loose blower housing, panels, etc. Disconnect power from unit before removing or replacing • High static creating high blower speed? connectors, or servicing motor. To avoid electric shock from - Check for air whistling through seams in ducts, cabinets or panels the motor’s capacitors, disconnect power and wait at least 5 - Check for cabinet/duct deformation minutes before opening m


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Bard Mfg. Co.P1136A1 取扱説明書 エアコン 24
2 Bard Mfg. Co.W17A 取扱説明書 エアコン 5
3 Bard Mfg. Co.HA4S3KA 取扱説明書 エアコン 3
4 Bard Mfg. Co.HL5S2KA 取扱説明書 エアコン 4
5 Bard 357-93-E 取扱説明書 エアコン 4
6 Bard Mfg. Co.W12A1 取扱説明書 エアコン 2
7 Bard Mfg. Co.w17a2 取扱説明書 エアコン 14
8 Bard Mfg. Co.P1130A1 取扱説明書 エアコン 0
9 Bard Mfg. Co.HL4S2KA 取扱説明書 エアコン 1
10 Bard Mfg. Co.W18L1 取扱説明書 エアコン 0
11 Bard Mfg. Co.W30L1 取扱説明書 エアコン 1
12 Bard Mfg. Co.W42A1 取扱説明書 エアコン 4
13 Bard Mfg. Co.W24L1 取扱説明書 エアコン 1
14 Bard Mfg. Co.W24A1 取扱説明書 エアコン 3
15 Bard Mfg. Co.W42L2 取扱説明書 エアコン 0
16 Sony SU-PW2 取扱説明書 エアコン 12
17 Sony CV-P12PX 取扱説明書 エアコン 3
18 Sony MULTI CHANNEL AV RECEIVER STR-DG710 取扱説明書 エアコン 31
19 Sony VGN-BX500 取扱説明書 エアコン 1
20 Philips 190S5 取扱説明書 エアコン 21