ページ1に含まれる内容の要旨
User’s
GUide
BT108 and BT109
Bluetooth® Headsets
Also in this package:
2 extra ear cushions AC (indoor) power DC (car) power adapter
adapter (BT109 only)
Questions? Problems?
Get help on the web at www.uniden.com
or call our Customer Service line at 800-292-2294.
ページ2に含まれる内容の要旨
Getting to Know the Headset Using the headset at excessive P Po ow wer er volume can cause permanent c connec onnect ter er Speak Speaker er hearing loss. To reduce the P Po ow wer er butt button on risk of hearing damage, use Ear Ear LED LED cushion cushion the minimum volume level V Volume olume necessary (see page 12). D Do own wn Ear Ear butt button on hook hook What the buttons do V Volume Up olume Up butt button on M Micr icrophone ophone The buttons activate the function after
ページ3に含まれる内容の要旨
What the LED colors mean Color State Meaning The headset is currently charging. When the Steady battery is fully charged, the LED turns off. Red Flashing The battery is low. Flashing The headset is turned on. Blue Slow flash (every 3 seconds) The headset is paired to a Bluetooth device. Red & blue Alternating flash The headset is in pairing mode. Setting Up Your Headset Charge the battery Before using your headset, charge the battery for at least 8 hours. Charging the battery completely (and k
ページ4に含まれる内容の要旨
Charging the BT108 Charging the BT109 Connect the adapter to the power Connect either adapter to the power connector on the top of connector on the top of the headset, the headset. Connect the AC adapter to a standard 120 volt then plug it into a standard 120 volt AC (regular indoor) power outlet. Connect the DC adapter to AC (regular indoor) power outlet. a standard 12 volt DC (regular automobile) power outlet. Pair the headset to your Bluetooth phone Pairing is like “introducing” two Bluet
ページ5に含まれる内容の要旨
. On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone’s manual for detailed instructions.) . Your phone should discover a device called a BT108, BT108 headset, BT109, or BT109 headset, When your phone asks if you want to pair with this device, answer yes. . When your phone prompts you for a PIN code or password to pair with the BT108 or BT109 enter 0000. . When the he
ページ6に含まれる内容の要旨
Once the headset is paired: ► Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last. ► If the headset loses the connection (e.g., if your phone is out of range), it reconnects automatically. To manually reconnect, press Power. ► If the headset goes more than 1 hour with no connection, it automatically turns off. Using Your Headset P Plac lace the e the Put your headset on hook hook Insert the ear cushion, behind behind y your our
ページ7に含まれる内容の要旨
clear. Take a few minutes to move the headset around until you find the best angle for the ear cushion. If you can’t find your sweet spot or if the cushion doesn’t fit comfortably in your ear, change it to one of the other sizes that came with the headset. Pull the cushion off gently and snap a new one on. Wearing the headset on your left ear If you want Hold the hook a Hold the hook at the t the to wear the 11 bott bottom and gen om and gently lif tly lift t S Slide it o lide it ov v
ページ8に含まれる内容の要旨
Available Features After the headset is connected, you can use the following features: Just make the call from your mobile phone as usual; your phone should Make a call automatically send the call to the headset. If your phone doesn’t, press and hold Power for 2 seconds to send the call to the headset manually. Answer a call While the call is ringing, press Power. Hang up Press Power. Send a call back During a call, press and hold Power for 2 seconds. The headset sends the call to to your pho
ページ9に含まれる内容の要旨
Muting the microphone To mute the microphone so the caller can’t hear you, press and hold both Volume Up and Volume Down for about one second. The headset beeps periodically to remind you that the microphone is muted. Press and hold the buttons again to turn the microphone back on. Troubleshooting and Maintenance If you have problems with the headset, see the suggestions in the table below. If these suggestions don’t help, contact customer support (see the cover for contact information). I
ページ10に含まれる内容の要旨
If... Try... The headset paired with - Making sure the call connected and is still active. my phone, but I can’t hear - Making sure the phone transferred the call to the headset. Press anything through it. and hold Power for two seconds to transfer the call. - The battery may be getting low. If the LED is blinking red, charge the battery. The headset keeps beeping, - Seeing if your phone has lost the network signal. If your phone and I don’t know why. sounds an alert when it can’t connect t
ページ11に含まれる内容の要旨
• The headset can be connected only to devices Noise or Static on the Headset that support the Bluetooth headset or hands- The most common cause of noise or static on any free profile. This product is not compatible with wireless device is interference. Bluetooth devices standard cordless phones. operate in the ISM band (2.402 GHz ~ 2.480 GHz); any equipment operating in this frequency Battery life range might interfere with the headset. Some With average use, the battery should provide co
ページ12に含まれる内容の要旨
headset, too. Transfer the call to your phone and • Set the volume at the minimum level needed see if the audio quality improves. If it doesn’t, to hear in the current environment. If possible, check around for things that might interfere use your headset in quiet surroundings or try with your phone. to move to an area with less background noise before adjusting the volume. Safety and Handling Information • Start with the volume at its lowest setting, For maximum product life, do not drop
ページ13に含まれる内容の要旨
Important Safety Instructions • Do not disassemble, modify, or attempt to repair any component of this product. Uniden America Corporation dOes NOT represent this product to be waterproof. To • Check the laws and regulations on the use of reduce the risk of fire, electrical shock, or mobile phones and hands-free equipment damage to the product, dO NOT expose this in the areas where you drive. Always give product to rain or moisture. full attention to driving and pull off the road When
ページ14に含まれる内容の要旨
FCC Notice Industry Canada statement This device complies with part 15 of the FCC This device complies with RSS-210 of the rules. Operation is subject to the following Industry Canada Rules. Operation is subject to two conditions: (1) This device may not cause the following two conditions: (1) This device harmful interference, and (2) This device must may not cause harmful interference, and (2) this accept any interference received, including device must accept any interference received, in
ページ15に含まれる内容の要旨
Lithium-polymer battery information sale. The warranty is invalid if the Product is a) This device contains a lithium-polymer battery. damaged or not maintained as reasonable or The headset and battery must be recycled or necessary, b) modified, altered, or used as part disposed of properly. Contact your local waste of any conversion kits, subassemblies, or any management office for information on battery configurations not sold by Uniden, c) improperly recycling or disposal. installed, d)
ページ16に含まれる内容の要旨
with the performance of this warranty. other rights which vary from state to state. This Warrantor, at its option, may replace the unit warranty is void outside the United States of with a new or refurbished unit. America and Canada. THE LIMITED WARRANTY SET FORTH ABOVE IS PROCEDURE FOR OBTAINING PERFORMANCE OF THE SOLE AND ENTIRE WARRANTY PERTAINING WARRANTY: If, after following the instructions TO THE PRODUCT AND IS IN LIEU OF AND in the owner’s manual you are certain that the EXCLUDES A
