ページ1に含まれる内容の要旨
3COM ROUTER 5000/6000 FAMILY
QUICK REFERENCE GUIDE
Overview
This Command Reference applies to the following Router 5000/6000 models running software version 3.0.
Router 5012 (3C13701) Router 5682 (3C13701)
Router 5232 (3C13751) Router 6040 (3C13840)
Router 5642 (3C13755) Router 6080 (3C13880)
About the Command Line Interface
To use and navigate the command line interface of your unit, please refer to the following points for assistance:
■ When initially accessing the command line interface, pre
ページ2に含まれる内容の要旨
2 3Com Router 5000/6000 Family Command Reference Displaying Command Parameters At the prompt, enter the name of the command followed by a space and ?. For example: boot ? The following parameters are displayed: attribute-switch Exchange the file main-attribute and backup-attribute. boot-loader Select a file to boot at the next time bootrom Update Bootrom web-package Set web resource package To specify boot loader, enter the command as follows: boot boot-loader ? Yo
ページ3に含まれる内容の要旨
3Com Router 5000/6000 Family 3 Command Reference abr-summary Use the abr-summary command to configure the route aggregation on the area border router (ABR). OSPF Area view access-limit Use the access-limit command to configure a limit to the amount of supplicants in the current ISP domain. ISP Domain view acl-reflect timeout Use the acl-reflect timeout command to set the global aging time of reflexive ACLs. System view acl Use the acl command to create an access control list and enter ACL view.
ページ4に含まれる内容の要旨
4 3Com Router 5000/6000 Family Command Reference address Use the address command to configure a route to the peer voice gateway or assign an X.121 address for a destination host. Voice Entity view address sip Use the address sip command to set routing policy for reaching the remote voice gateway (VG) to SIP. Voice Entity view adsl standard Use the adsl standard command to set the standard applied to the ADSL interface. ATM (ADSL) Interface view adsl tx_attenuation Use the adsl tx_attenuation c
ページ5に含まれる内容の要旨
3Com Router 5000/6000 Family 5 Command Reference ani-offset Use the ani-offset command to configure the number of digits of the called number to be collected prior to requesting the calling party information. R2 CAS view answer Use the answer command to configure whether the terminating point is required to send answer signal. R2 CAS view apply access-vpn vpn-instance Use the apply access-vpn vpn-instance command to specify to search private network forwarding routes in vpn-name1, vpn-name2,
ページ6に含まれる内容の要旨
6 3Com Router 5000/6000 Family Command Reference apply origin Use the apply origin command to set the routing source of BGP routing information. Routing Policy view apply output-interface (for Multicast Policy Routing) Use the apply output-interface command to configure an outgoing interface list in a route-node. Route-Policy view apply output-interface (for Unicast Policy Routing) Use the apply output-interface command to set a packet forwarding interface. Route-Policy view apply policy outbou
ページ7に含まれる内容の要旨
3Com Router 5000/6000 Family 7 Command Reference arp timer aging Use the arp timer aging command to set the aging timer for dynamic ARP entries. System view asbr-summary Use the asbr-summary command to configure summarization of redistributed routes by OSPF. OSPF view ascii Use the ascii command to set the type of the transmitted data to ASCII. FTP Client view aspf-policy Use the aspf-policy command to define an ASPF policy. For a defined policy, the policy can be invoked through its policy nu
ページ8に含まれる内容の要旨
8 3Com Router 5000/6000 Family Command Reference authentication Use the authentication command to enable user authentication and authorization for the access service number. Voice Access-Number view authentication Use the authentication command to set the IP address, port number and shared key for the primary and secondary TACACS+ authentication servers. TACACS+ view authentication-algorithm Use the authentication-algorithm command to select the authentication algorithm for an IKE proposal. I
ページ9に含まれる内容の要旨
3Com Router 5000/6000 Family 9 Command Reference balance Use the balance command to configure the number of routes participating in BGP load balancing. BGP view band-based-sharing Use the band-based-sharing command to enable bandwidth-based unbalanced load sharing. System view baudrate Use the baudrate command to set the baud rate of a serial interface. Serial Interface view bert Use the bert command to set test error bit for line Bit. CE3 interface view bert (CT1/PRI Interface) Use the bert co
ページ10に含まれる内容の要旨
10 3Com Router 5000/6000 Family Command Reference binary Use the binary command to set data type to binary for file transfer. FTP Client view boot bootrom Use the boot bootrom command to upgrade BootRom. System view boot bootrom Use the boot bootrom command to upgrade BootRom. System view bootfile backup Use the bootfile backup command to specify the backup boot file. System view bootfile dir Use the bootfile dir command to view information about all the boot files in the Flash, including file
ページ11に含まれる内容の要旨
3Com Router 5000/6000 Family 11 Command Reference bridge-set stp enable Use the bridge-set stp enable command to disable STP on the port. Interface view bridge-set stp port pathcost Use the bridge-set stp port pathcost command to configure the path cost of the bridge port. Interface view bridge-set stp port priority Use the bridge-set stp port priority command to configure the priority of the bridge port. Interface view bridge stp ieee Use the bridge stp ieee command to specify a bridge set to
ページ12に含まれる内容の要旨
12 3Com Router 5000/6000 Family Command Reference ca identifier Use the ca identifier command to specify the CA this device trusts and have the "name" CA bound with this device. PKI Domain view cable Use the cable command to set the cable length matching the CE1/PRI interface. CE1/PRI Interface view cable Use the cable command to set the cable length of the ATM E1 interface. ATM E1/T1 Interface view cable Use the cable command to configure the cable mode of ATM T3 cable, i.e., to set the dista
ページ13に含まれる内容の要旨
3Com Router 5000/6000 Family 13 Command Reference cd Use the cd command to change the current working directory of the user to the specified directory. User view cd Use the cd command to change the current working directory path on the remote FTP server. FTP Client view cdr Use the cdr command to configure the saving rule for call detail record. Voice AAA view cdup Use the cdup command to quit to the upper directory. SFTP Client view cdup Use the cdup command to return from the current working
ページ14に含まれる内容の要旨
14 3Com Router 5000/6000 Family Command Reference cid enable Use the cid enable command to enable CID on the FXO interface. Voice Subscriber-Line view cid select-mode Use the cid select-mode command to configure the route selection mode used by the calling party to set up VoFR calls. DLCI view cid send Use the cid send command to enable the FXO or FXS module to send calling numbers to the IP side. Voice Subscriber-Line view cid type Use the cid type command to configure the format of transmitt
ページ15に含まれる内容の要旨
3Com Router 5000/6000 Family 15 Command Reference clock Use the clock command to set the clock mode of ATM E3/T3 interface. ATM E3/T3 Interface view. clock Use the clock command to set the clock mode on an ATM interface. ATM Interface view clock Use the clock command to specify ATM interface to use internal transmission clock signal. ATM Master Interface view clock Use the clock command to set the clock mode of the CPOS interface. CPOS Interface view clock Use the clock command to set the clock
ページ16に含まれる内容の要旨
16 3Com Router 5000/6000 Family Command Reference code nrzi Use the code nrzi command to set the digital signal coding format to None-Return-to-Zero-Inverse (NRZI) for a synchronous serial interface. Synchronous Serial Interface view code nrzi Use the code nrzi command to configure the NRZI encoding of the synchronous serial port. Synchronous Serial Interface System view command-alias enable Use the command-alias enable command to enable the command alias function. System view command-alias ma
ページ17に含まれる内容の要旨
3Com Router 5000/6000 Family 17 Command Reference controller cpos Use the controller cpos command to enter CPOS interface view. System view controller e1 Use the controller e1 command to enter CE1/PRI interface view. System view controller e3 Use the controller e3 command to enter the CE3 interface view. System view controller t1 Use the controller t1 command to enter a CT1/PRI interface view. System view controller t3 Use the controller t3 command to enter the CT3 interface view. System view c
ページ18に含まれる内容の要旨
18 3Com Router 5000/6000 Family Command Reference crl update-period Use the crl update-period command to specify the update period of CRL, which is the interval between local downloads of CRLs from CRL access server. PKI Domain view crl url Use the crl url command to specify the distribution point URL for CRL. PKI Domain view crp-policy Use the crp-policy command to restrict the range for valid C-RP and the group range served by each C-RP, preventing C-RP cheating. PIM view ct1 alarm Use the
ページ19に含まれる内容の要旨
3Com Router 5000/6000 Family 19 Command Reference ddns refresh Use the ddns refresh command to request the DDNS service provider to notify the DNS server that the bound IP address of the domain name specified by the ddns domainname command has changed. DDNS Configuration view ddns server Use the ddns-server command to specify a DDNS service provider and enter its view. At present, only 3322.org is available. System view ddns source interface Use the ddns source-interface command to configure
ページ20に含まれる内容の要旨
20 3Com Router 5000/6000 Family Command Reference debugging clns echo Use the debugging clns echo command to enable debugging for Echo packets. User view debugging clns rd Use the debugging clns rd command to enable debugging for RD packets. User view debugging clns routing Use the debugging clns routing command to enable debugging for Layer 3 routing tables. User view debugging connection-limit Use the debugging connection-limit command to enable connection limit debugging. User view debugging
