ページ1に含まれる内容の要旨
FO-DVI-1080LC Series
User’s Guide
Models
FO-DVI-1080LC-Set
© 2007 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license,
ページ2に含まれる内容の要旨
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 4 1.3 Regulatory Notices Federal Communications Commi
ページ3に含まれる内容の要旨
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions
ページ4に含まれる内容の要旨
1.2 Safety Instructions Do not dismantle the housing or modify the module. Dismantling the housing or modifying the module may result in electrical shock or burn. Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards Keep the module away from liquids. Spillage into the housing may result in fire, electrical shock, or equipment damage. If an obj
ページ5に含まれる内容の要旨
1.6 Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.7 Installation
ページ6に含まれる内容の要旨
Avenview FO-DVI-1080LC is designed to self detect the resolution of the monitor and change the resolution accordingly. Follow these steps for connecting to a device: 1. Power on your display 2. Connect Transmitter to the DVI of display 3. Plug the DC power of Transmitter 4. Pull out after about 5 – 10 seconds for reading the EDID information from the display 5. Connect Transmitter to the PC and Receiver to the Display. 6. At the same time, connect DC power to the receiver 7. Connect th
ページ7に含まれる内容の要旨
Section 2: Specifications Item Description Video Bandwidth 1.65Gbps (Single Link) DVI 24Pin Plug and LC Connector Connector Power Consumption 0.75 Watt (max) SXGA 1280 x 1024 @ 700 meters (2300 feet) Supported Resolution UXGA 1600 x 1200 @ 500 meters (1650 feet) and Distance WUXGA 1920 x 1200 @ 100 meters (330 feet) Optical Optical Source 850nm VCSEL O/E Converter PIN Photo Diode Fiber Type 50/125 or 62.5/125 LC Multi-Mode Fiber Environmental Operation 0˚ to 50˚C Degree St
ページ8に含まれる内容の要旨
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequent
