ページ1に含まれる内容の要旨
BIPAC-7402 / 7402W
(Wireless) ADSL VPN Firewall Router
with 3DES Accelerator
Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Billion BIPAC-7402 / 7402W (Wireless) ADSL VPN Firewall Router with 3DES Accelerator For more detailed instructions on configuring and using the (Wireless) ADSL Firewall Router, please refer to the on-line manual. Package Contents BIPAC-7402 / 7402W ADSL Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable Console (PS2-RS232) Cable AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use the BIPAC-740
ページ4に含まれる内容の要旨
Quick Start Guide The Front LEDs 1 2 4 6 3 5 LED Meaning Lit steady when there is a PPPoA / PPPoE connection. 1 PPP / MAIL Lit and flashed periodically when there is email in the Inbox. 2 ADSL Lit when successfully connected to an ADSL DSLAM (“linesync”). Lit when connected to an Ethernet device. LAN Port 3 Green for 100Mbps; Orange for 10Mbps. 1X — 4X (RJ-45 connector) Blinking when data is Transmitted / Received. WLAN Lit green when the wireless connection is es
ページ5に含まれる内容の要旨
Billion BIPAC-7402 / 7402W (Wireless) ADSL VPN Firewall Router with 3DES Accelerator The Rear Ports 4 5 6 1 3 2 ＊ ＊Only the BIPAC-7402W has a wireless interface and antenna. BIPAC-7402 router does NOT have an antenna or wireless interface. Port Meaning Power Switch 1 Power ON/OFF switch PWR 2 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory defa
ページ6に含まれる内容の要旨
Quick Start Guide Connecting Your ADSL Router 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. (For 7402W only: the WLAN LED will be lit steadily). 4
ページ7に含まれる内容の要旨
Billion BIPAC-7402 / 7402W (Wireless) ADSL VPN Firewall Router with 3DES Accelerator Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatic
ページ8に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
ページ9に含まれる内容の要旨
Billion BIPAC-7402 / 7402W – (Wireless) ADSL VPN Firewall Router with 3DES Accelerator Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio butt
ページ10に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 8
ページ11に含まれる内容の要旨
Billion BIPAC-7402 / 7402W – (Wireless) ADSL VPN Firewall Router with 3DES Accelerator Configuring Your ADSL VPN Firewall Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out. If your ping is
ページ12に含まれる内容の要旨
Quick Start Guide Connecting to the Router Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. A user name and password window will appear. The default User Name and Password are “admin” and” admin”. Press OK to logon to the router Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you c
