HP (Hewlett-Packard) Dynamix HP-30 Coaxの取扱説明書

ページ1に含まれる内容の要旨

DYNAMIX HP-30 COAX
DYNAMIX HP-30 COAX
128 Mbps
128 Mbps
H HP PN NA A 3 3..0 0 o ov ve er r C Co oa ax x E Etth he er rn ne ett B Br riid dg ge e







User’s Guide
User’s Guide

ページ2に含まれる内容の要旨

INTRODUCTION Dynamix HP-30 Coax, HCNA (HomePNA3.0 over Coax) to Ethernet bridge connects any Ethernet device to a high speed access device or to a LAN for Internet access. This bridge brings you the newest Ethernet compatible technology that uses the coaxial cable as the network’s physical wiring thereby eliminating the need to install new wiring. It is designed to operate on the coaxial TV cable installed in homes. Dynamix HP-30 Coax enables You to set-up your Private Network at Home wi

ページ3に含まれる内容の要旨

HARDWARE INSTALLATION Parts Names and Functions LED Indicators on the Front Panel

ページ4に含まれる内容の要旨

Ports on the Rear Panel Essential Hardwares

ページ5に含まれる内容の要旨

Hardware Connections 1. Select a convenient location for the bridge near the PC or Ethernet device to which it will be connected. The bridge should be kept away from excessive heat. 2. Using one coaxial cable to connect the HCNA port to F-Type connector on the wall. Using another coaxial cable to connect the other F-type TV port to TV set. 3. Connect the LAN1/LAN2 port to your Ethernet equipped device. 4. Connect the power adapter to the DC5V port into a wall outlet.

ページ6に含まれる内容の要旨

The figure above shows how to connect an xDSL modem to a home coaxial cable network. Follow the same steps to connect any Ethernet device such as a HUB or printer, to a coaxial cable network. Now you should have connected the LAN port, HCNA port and the DC5V port to the appropriate devices or lines. LED will be as: POWER ON LAN Link/Act ON HCNA Link/Act ON HCNA SyncMode ON For more information on LEDs, see section "LED Indicators on the Front Panel" TROUBLESHOOTING The bridg

ページ7に含まれる内容の要旨

SPECIFICATIONS Standards IEEE 802.3 10BaseT Ethernet compliant IEEE 802.3u 100BaseT Fast Ethernet compliant HomePNA 3.0 over Coax (HCNA) compliant Data Rates HCNA: 128 Mbps Ethernet: 10/100 Mbps Distances HCNA : 1200 meter maximum between the two farthest nodes on LAN Ethernet: 100 meter maximum Power Consumption: 5V DC IN, Less than 4 watt Certifications CE, FCC Part 15 LEDs Power Ethernet Link/Activity HCNA Link/Activity; SyncMode Conn