ページ1に含まれる内容の要旨
®
Netopia 3347W/3357W-ENT
ADSL Wireless Router
Getting Started Guide
ページ2に含まれる内容の要旨
Copyright ©2003 Netopia, Inc., v.081203 All rights reserved. Printed in the U.S.A. This manual and any associated artwork, software, and product designs are copyrighted with all rights reserved. Under the copyright laws such materials may not be copied, in whole or part, without the prior written consent of Netopia, Inc. Under the law, copying includes translation to another language or format. Netopia, Cayman, and “Making Broadband Work” are registered trademarks of Netopia, Inc. All r
ページ3に含まれる内容の要旨
C C C Co o o on n n nt t t te e e en n n nt t t ts s s s Contents 3 Chapter 1 — Introduction..........................................................1-5 Overview....................................................................... 1-5 Features and Capabilities............................................... 1-5 How to Use this Guide.................................................... 1-6 Chapter 2 — Making the Physical Connections..........................2-1 Find a Location.
ページ4に含まれる内容の要旨
4 Getting Started Guide 4. Easy Setup Security Configuration ..................... 6-8 Chapter 7 — Wireless LAN Configuration...................................7-1 Wireless Configuration ................................................... 7-1 Appendix A — Technical Specifications and Safety Information ..A-1 Description.................................................................... A-1 Power requirements ............................................. A-1 Environment ......................
ページ5に含まれる内容の要旨
Introduction 1-5 C C C Ch h h ha a a ap p p pt t t te e e er r r r 1 1 1 1 I II In n n nt t t tr r r ro o o od d d du u u uc c c ct t t t ii iio o o on n n n Overview The Netopia 3347W/3357W-ENT ADSL Wireless Router is a full-featured, ADSL router for connecting both wired and wireless local area networks (LANs) to the Internet and other remote networks. The Netopia 3347W/3357W-ENT ADSL Wireless Router connects easily to your ADSL service to provi
ページ6に含まれる内容の要旨
1-6 Getting Started Guide • IPSec implementation supports DES or 3DES encryption, MD5 or SHA1 encapsulation, and manual or IKE keying • Built-in stateful firewall and packet-filtering firewall features protect LAN resources from Internet intruders • Backup Default Gateway feature with an external router enables high-availability solutions • Menu-driven or CLI interfaces via Telnet • Easy Setup with menu-driven interface • Tiered Access, 2 levels of configuration ac
ページ7に含まれる内容の要旨
Making the Physical Connections 2-1 C C C Ch h h ha a a ap p p pt t t te e e er r r r 2 2 2 2 M M M Ma a a ak k k ki ii in n n ng g g g t t t th h h he e e e P P P Ph h h hy y y ys s s s ii iic c c ca a a a ll ll C C C Co o o on n n nn n n ne e e ec c c ct t t ti ii io o o on n n ns s s s This section tells you how to make the physical connections to your Netopia 3347W/3357W-ENT ADSL Wireless Router. This section covers the following topics
ページ8に含まれる内容の要旨
2-2 Getting Started Guide You will need: • A Windows–based PC or a Macintosh computer with Ethernet connectivity for configuring the Netopia 3347W/3357W-ENT. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Configuring TCP/IP” on page 4-5. • A phone jack to which your ADSL provider is providing ADSL service. (Your phones and ADSL service generally use the same phone line.) Important Safety Instructions POWER SUPPLY INSTALLATION Connect the power
ページ9に含まれる内容の要旨
Making the Physical Connections 2-3 Identify the Connectors and Attach the Cables Identify the connectors on the back panel and attach the necessary Netopia Router cables. Netopia 3347W/3357W-ENT back panel DSL 4 3 LAN 2 1 Power Off / On DSL port Power port Ethernet Wireless antenna ports . Port Description DSL port An RJ-11 jack labeled DSL to connect to your DSL wall outlet. Ethernet ports Four RJ-45 10/100Base-T Ethernet jacks. You can use one of these to configure the Netopia 3347W
ページ10に含まれる内容の要旨
2-4 Getting Started Guide Connect your computer, DSL line, and power source as shown. Ethernet DSL DC Power 4 DSL 4 3 LAN 2 1 Power Off / On 2 1 3 1. For a direct computer to router Ethernet connection, use the standard Ethernet cable included with your router. 2. Use the supplied RJ-11 telephone cable to connect the router to your DSL wall outlet. 3. Connect the supplied power brick to a power outlet and the connector end to the router. 4. Each computer using the wireless network requires
ページ11に含まれる内容の要旨
Making the Physical Connections 2-5 Netopia 3347W/3357W-ENT ADSL Wireless Router Status Lights The figure below represents the Netopia 3347W/3357W-ENT status light (LED) panel. Netopia 3347W/3357W-ENT status indicator lights Power: Solid green when the power is on DSL Sync - Flashes green when training Solid green when trained Flashes green for DSL traffic LAN 1, 2, 3, 4 - Solid green when connected to each port on the LAN. Flash green when there is activity on each port. Wireless Link -
ページ12に含まれる内容の要旨
2-6 Getting Started Guide
ページ13に含まれる内容の要旨
Connecting to Your Local Area Network 3-1 C C C Ch h h ha a a ap p p pt t t te e e er r r r 3 3 3 3 C C C Co o o on n n nn n n ne e e ec c c ct t t ti ii in n n ng g g g t t t to o o o Y Y Y Yo o o ou u u ur r r r L L L Lo o o oc c c ca a a a ll ll A A A Ar r r re e e ea a a a N N N Ne e e et t t tw w w wo o o or r r rk k k k This chapter describes how to physically connect the Netopia 3347W/3357W-ENT to your local area network (LAN). Before you proceed, make sure the Netopi
ページ14に含まれる内容の要旨
3-2 Getting Started Guide Ethernet: Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on the LAN. Once the Netopia 3347W/3357W-ENT is properly configured and connected to your LAN, PC and Macintosh computers that have their required components in place will be able to connect to the Internet or other remote IP networks. Connecting to an Ethernet Network You can connect a standard 10/100Base-T Ethernet network to the Netopia 3347W/3357W-ENT using any of
ページ15に含まれる内容の要旨
Connecting to Your Local Area Network 3-3 If you add devices connected through a hub or switch, connect the hub or switch to an Ethernet port on the Netopia 3347W/3357W-ENT. The Netopia 3347W/3357W-ENT in a 10/100Base-T network To connect your 10/100Base-T network to the Netopia 3347W/3357W-ENT through the Ethernet port, use standard DSL 4 3 LAN 2 1 Power Off / On Category 5 Ethernet cables with RJ-45 connectors. You can attach additional devices using standard Category 5 Ethernet cab
ページ16に含まれる内容の要旨
3-4 Getting Started Guide The Netopia 3347W/3357W-ENT in an 802.11b wireless network To create your 802.11b wireless network you must install a Wi-Fi CERTIFIED™ wireless adapter card in each computer that will join the wireless LAN. Many manufacturers offer such adapter cards for almost all major brands of computers. You can find lists of these adapters on the Wi-Fi Alliance website: http://www.weca.net. Follow the manufacturer’s instructions for installing your wireless adapter
ページ17に含まれる内容の要旨
Configuring TCP/IP 4-5 C Ch ha ap pt te er r 4 4 C Ch ha ap pt te er r 4 4 C Co on nf fiig gu ur riin ng g T TC CP P/ /I IP P C Co on nf f iig gu ur r iin ng g T TC CP P // IIP P Once you have set up your physical local area network, you will need to configure Internet Protocol (TCP/IP) on each client workstation connected to your Netopia 3347W/3357W-ENT. This chapter describes how to configure TCP/IP for both Windows-based and Macintosh computers. This chapter explains the following topics
ページ18に含まれる内容の要旨
4-6 Getting Started Guide b. Some Windows Start menu -> Control Panel -> Network versions follow a path and Internet Connections -> Network like this: Connections -> Local Area Connection -> Properties -> Internet Protocol [TCP/IP] -> Properties Then go to Step 2. Step 2. Select Obtain an IP address automatically. Step 3. Select Obtain DNS server address automatically, if available. Step 4. Remove any previously configured Gateways, if available. Step 5. OK
ページ19に含まれる内容の要旨
Configuring TCP/IP 4-7 Configuring TCP/IP on Macintosh Computers Configuring TCP/IP in a Macintosh computer requires the following: • You must have Open Transport installed, standard in MacOS 8 and higher and optional in earlier system versions. • You must have built-in Ethernet or a third-party Ethernet card and its associated drivers installed in your Macintosh. Macintosh MacOS 8 or higher or Mac OS X Step 1. Access the TCP/IP or Network control panel. a. MacOS follows a Apple Menu -> Contro
ページ20に含まれる内容の要旨
4-8 Getting Started Guide Step 3. Select Configure Using DHCP Step 4. Close and Save, if prompted. NOTE: You can use these instructions to configure other computers on your network to accept IP addresses served by the Netopia 3347W/3357W-ENT.
