ページ1に含まれる内容の要旨
802.11g Wireless Broadband Router
WRT-415
User’s Manual
ページ2に含まれる内容の要旨
Copyright Copyright © 2006 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents here
ページ3に含まれる内容の要旨
Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm(8 inches) during normal operation. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be requ
ページ4に含まれる内容の要旨
Rev: 1.0 (April. 2006) Part No. EM-WRT415
ページ5に含まれる内容の要旨
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...........................................................................................................1 1.1 PACKAGE CONTENTS ......................................................................................................................1 1.2 SYSTEM REQUIREMENTS ................................................................................................................1 1.3 FEATURES .....................................................
ページ6に含まれる内容の要旨
3.5.5 Special AP............................................................................................................................24 3.5.6 DMZ.....................................................................................................................................25 3.5.7 Firewall Rule........................................................................................................................26 3.6 MANAGEMENT.....................................................
ページ7に含まれる内容の要旨
Chapter 1 Introduction 1.1 Package Contents Make sure that you have the following items: • One WRT-415 • One dipole antenna • One AC Power Adapter • One User’s Manual CD • One Quick Installation
ページ8に含まれる内容の要旨
1.3 Features • 2.4GHz ISM band, unlicensed operation • Supports WPA (Wi-Fi Protected Access) for both 802.1x and WPA-PSK • Dual-standard capability: 802.11g and 802.11b compliant • Supports DHCP server • Web Configuration provide a user friendly interface for the user to configure through web browser • Supports UPnP (Universal Plug and Play) • Supports MAC / IP / Protocol Filter • Supports DDNS, virtual server and DMZ • Build-in 4 -port switch • Provides Setup Wizard for the user
ページ9に含まれる内容の要旨
FCC Class B, CE Mark B EMI: 1.5 Wireless Performance The following information will help you utilizing the wireless performance, and operating coverage of WRT-415. 1. Site selection To avoid interferences, please locate WRT-415 and wireless clients away from transformers, microwave ovens, heavy-duty motors, refrigerators, fluorescent lights, and other industrial equipments. Keep the number of walls, or ceilings between AP and clients as few as possible; otherwise the signal strength
ページ10に含まれる内容の要旨
Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WRT-415. 2.1 Hardware Connection 1. Locate an optimum location for the WRT-415. The best place for your WRT-415 is usually at the center of your wireless network, with line of sight to all of your mobile stations. 2. Connect the power adapter to the receptor at the rear panel of the WRT-415, and plug the other end of the power adapter to a wall outlet or
ページ11に含まれる内容の要旨
3 Green Link is established Blinking Green Packets are transmitting or receiving Green Link is established 4 Blinking Green Packets are transmitting or receiving - 5 -
ページ12に含まれる内容の要旨
Chapter 3 Configure through Web Browser Web configuration provides a user-friendly graphical user interface (web pages) to manage your WRT-415. 1. Open your web browser. 2. Enter the IP address of your WRT-415 in the address field (default IP address is http://192.168.1.1). 3. A User Name and Password dialog box will appear. Please enter your User Name and Password here. Default User Name and Password are both “admin”. Click “OK”. 4. When the first time you enter WRT-415, Setup Wizar
ページ13に含まれる内容の要旨
mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen. Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is "AP-Router." IP Address: This is the IP address of the router. The default IP address is 192.168.1.1. Subnet Mask: Type the subnet mask for the router in the text box. The default subnet mask is 255.255.255.0. DHCP Server: Enables the DHCP server to allow the router to automa
ページ14に含まれる内容の要旨
MAC Address: If required by your ISP, type the MAC address for the WRT-415 WAN interface in this field. You can also copy the MAC address of your PC’s network card to the WRT-415 WAN interface by clicking “Clone MAC address”. When using PPPoE, enter the following information in the fields (some information are provided by your ISP): WAN IP: Select whether you want the ISP to provide the IP address automatically, or whether you want to assign a static IP address to the WRT-415 WAN inte
ページ15に含まれる内容の要旨
When using PPTP, enter the following information in the fields (some information are provided by your ISP): Dynamic IP / Static IP: Select the IP assignment method. IP Address: Type the IP address which your ISP provides. Subnet Mask: Type the Subnet Mask which your ISP provides. Gateway: Type the IP address of Gateway which your ISP provides. DNS: Type the IP address of DNS server which your ISP provides. Server IP/Name: Type the IP address or name of server which offers Internet ser
ページ16に含まれる内容の要旨
When using L2TP, enter the following information in the fields (some information are provided by your ISP): Dynamic IP / Static IP: Select the IP assignment method. IP Address: Type the IP address which your ISP provides. Subnet Mask: Type the Subnet Mask which your ISP provides. Gateway: Type the IP address of Gateway which your ISP provides. DNS: Type the IP address of DNS server which your ISP provides. Server IP/Name: Type the IP address or name of server which offers Internet ser
ページ17に含まれる内容の要旨
Administrator: Type the password the Administrator will use to login to the system. The password must be typed again for confirmation. User: Users can type a password to be used for logging in to the system. The password must be typed again for confirmation. 3.1.4 Time This screen enables you to set the time and date for the router's real time clock, select your time zone, specify an NTP server, and enable or disable daylight saving. Local Time: Displays the local time and date. Ti
ページ18に含まれる内容の要旨
Set the Time: Select the date and time from the pull-down lists, and click “Set Time” to set the WRT-415's internal clock to the correct date and time. Daylight Saving: Enables you to enable or disable daylight saving time. When enabled, select the start and end date for daylight saving time. 3.1.5 Dynamic DNS You can configure WRT-415 to use DDNS service if you already have a registered DDNS account. DDNS: You can enable or disable DDNS function here. Server Address: WRT-415 supports
ページ19に含まれる内容の要旨
Wireless Radio: Enable or disable wireless LAN via the WRT-415. SSID: Type an SSID in the field. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the WRT-415. Channel: Select a work channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WRT-415. 3.2.2 Security This screen allows you to set
ページ20に含まれる内容の要旨
WEP Key: Select the level of encryption you want from the drop-down list. WRT-415 supports 64, and 128-bit encryption. Key 1 ~ Key 4: There are 4 keys available, please ensure you have enter correct number for the key values with different Key Length and coding (Hex or ASCII) as 64bit (10 Hex digit / 5 ASCII), 128bit (26 Hex digit / 13 ASCII) or 256bit (58 Hex digit / 29 ASCII), please select one of them and enter the key you want to use. Click “Clear” to erase key values. Note: 128bit
