ページ1に含まれる内容の要旨
Wireless Router RNX-N400LX
User Manual
Default IP Address: 192.168.1.254
Default Login Name: admin
Default Password: guest
(Please change Default Login Name and Password once you entered into the Management Page, and keep a record
of your new Login Name and Password)
ページ2に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual Safety Warning Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Use ONLY an appropriate power adaptor or cord for your device. Connect the power adaptor or cord to the right supply voltage (f
ページ3に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual Table of Contents 1 INTRODUCTION ........................................................................................................................6 1.1 OVERVIEW.....................................................................................................................................6 1.2 KEY FEATURES.......
ページ4に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3.53 Firewall - MAC Filtering ..........................................................................................40 3.54 Firewall – Port Forwarding......................................................................................41 3.55 Firewall – URL Filtering .....................................................
ページ5に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual Before We Begin • Please configure RNX-N400LX with the computer that was last connected directly to your modem. • You can only use the Ethernet port on your modem. If you were using the USB connection before using RNX-N400LX, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to t
ページ6に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 1 Introduction 1.1 Overview Thank you for purchasing the RNX-N400LX. The Wireless LAN Broadband Router is an affordable IEEE 802.11b/g with 802.11n Draft 2.0 Wireless router solution; provides family and SOHO an affordable solution for high performance, secure, manageable and reliable WLAN. RNX-N400LX is not only a Wirele
ページ7に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 1.3 Package Contents Please open the package and make sure that you have all items listed below. Do not discard the packing materials, in case of return; the unit must be shipped back in its original package. 1. 1x 802.11n Draft 2.0 RNX-N400LX Router 2. 1x 2dBi 2.4GHz Detachable Antenna 3. 1x 100V~240V Power Adapter 4.
ページ8に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual Off RNX-N400LX’s WAN port is not linking On RNX-N400LX’s LAN port is linking Blinking RNX-N400LX is sending/receiving data through LAN port Off RNX-N400LX’s LAN port is not linking On Press Button to start searching Blinking RNX-N400LX is sending/receiving data through WAN Off Default – No Link Port/Connector
ページ9に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual The power jack allows an external DC power supply Power connection. 1.5 Network + System Requirements To begin using the RNX-N400LX, make sure you meet the following as minimum requirements: PC/Notebook. Operating System that supports Web Browsers Microsoft Windows Mac OS Linux 1 Free Ethernet port
ページ10に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual RNX-N400LX and Modem Rear View (WAN Port and LAN port Connection diagram between Wireless Router, and Modem) Supply DC power to the RNX-N400LX. Use only the AC/DC power adapter supplied with the RNX-N400LX; it may cause damage by using a different voltage power adapter. RNX-N400LX Rear View Connect Ethernet c
ページ11に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 2 Setup 2.1 Prepare your PC for RNX-N400LX’s configuration 2.11 For OS of Microsoft Windows 7: 1. Click the Start button and select Control Panel. The Control Panel window will appear. 2. Move mouse and select View network status and tasks under Network and Internet. The Network and Sharing Center window will appear. S
ページ12に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3. In Network Connections window, Mouse right click on Local Area Connection and select Properties, The Local Area Connection Properties window will popup. Move to choose Internet Protocol Version 4 (TCP/IPv4), then click Properties button. 12
ページ13に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 4. Move mouse and click General tab, Select Use the following IP address and type in values as following example. IP Address: 192.168.1.20, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the Wireless LAN Access Point. IP Subnet Mask: 255.255.255.0 5. Click OK to complete the IP parameters s
ページ14に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 2. Move mouse and double-click the right button on Network Connections item. The Network Connections window will appear. Double click Local Area Connection icon, then User Account Control window shown. Right click Continue button to set properties. 3. In Local Area Connection Properties window, Choose Networking tab, move
ページ15に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 2.14 For OS of Microsoft Windows 95/ 98/ Me: 1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. Note: Windows Me users may not see the Network control panel. If so, select View all Control Panel options on the left side of the window 2. Move mouse and double-clic
ページ16に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 7. Select Specify an IP address and type in values as following example. IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the Wireless LAN Access Point. IP Subnet Mask: 255.255.255.0 8. Click OK to complete the IP parameters setting. 2.2 Connecting to RNX-N400LX’s Web
ページ17に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3 RNX-N400LX Web Management page There are 7 major sections of RNX-N400LX which are Setup Wizard, Operation Mode, Wireless, TCP/IP Settings, Firewall, QoS, and Management. 3.1 Setup Wizard: When you first connect to the web management page of RNX-N400LX, you will see the Setup Wizard page. It has the same setup ste
ページ18に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3.12 Operation Mode: You can define your RNX-N400LX’s Operation Mode in this step. 3.13 Time Zone Setting: Here you can enable and configure whether to automatically update your time. 3.14 LAN Interface Setup: You can setup the Local Area Network IP address and subnet mask. 18
ページ19に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3.15 WAN Interface Setup: You can setup the WAN access type in this section by Static IP, DHCP, PPPoE, PPTP or L2TP. 3.16 Wireless Basic Setting: This page is used to configure basic wireless parameters like Band, Mode, Network Type SSID, Channel Number, Enable Mac Clone (Single Ethernet Client). 19
ページ20に含まれる内容の要旨
Wireless RouterRNX-N400LX User Manual 3.17 Wireless Security Setup: You can set different encryption for your RNX-N400LX, either through WEP, WPA, and WPA2. Once complete, click Finished to complete the Setup Wizard. 3.2 Operation Mode: Operation Mode is a quick setup on how you would like RNX-N400LX to perform as. You have the options Gateway, Bridge, an
