ページ1に含まれる内容の要旨
DC OUT
CONTROL PORT VIDEO IN
POA-PN02C
PJ-Net Organizer plus C
OWNER'S MANUAL
PLV-80/75 Series
LINK ACT
ページ2に含まれる内容の要旨
Compliance Federal Communication Commission Notice This equipment has been tested and found to comply SANYO POA-PN02C with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to Tested To Comply With FCC Standards provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- FOR HOME OR OFFICE USE ates, uses and can radiate radio frequency energy and, if not installed and used in accord
ページ3に含まれる内容の要旨
Compliance and Caution CAUTION ON USE IN NETWORk - When you receive an alert e-mail from the projector, you must check the projector immediately. Fire or accident may result if the projector is used in an abnormal condition. - W hen you install the projector at remote location and use it through the network, you must perform the safety inspections periodically. In this case you must pay attention to the change of environment in which you installed the projector. It may cause fire or an acc
ページ4に含まれる内容の要旨
Contents Compliance ..........................................................................................................................................................................2 Federal Communication Commission Notice ......................................................................................2 Chapter 1 Preparation ................................................................................................7 Features....................................................
ページ5に含まれる内容の要旨
Contents Projector information ..................................................................................................................................................56 Multi-control .....................................................................................................................................................................58 Controlling and setting the multi-projectors ....................................................................................58 Start/
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Chapter 1 1 Preparation Describes features and operating environment of this product. PJ-NET ORGANIZER OWNER'S MANUAL [PLV-80/75 Series] ENGLISH
ページ8に含まれる内容の要旨
Chapter 1 Preparation Features Web Management function (+p.25) With this function, you can monitor projector functions PJ2 PC1 PC2 PJ1 such as power status, lamp s tatus, input mo de, signal condition, lamp-use time, etc. through the network by using PC3 PC4 PC6 the web browser installed on PC5 Turn ON PJ2 your computer. E-Mail Alert function (+p.34) The projector (Network Unit) PJ2 PJ1 PC1 PC2 sends messages to the regis- tered e-mail addresses when a lamp abnormality or power failure
ページ9に含まれる内容の要旨
Features Multi-control func- PJ1 PJ2 PJ3 PJ4 tion (+p.58) A single computer can con- trol and set up the multiple projectors at the same time. PC6 PC5 PC4 Select Input2 for PJ1 to PJ4. Automatic On/Off using I am ready to turn ON, Clock function (+p.53) and select Input 3 (Video) Automatically turn on or off the projectors at specified date/day and time by using the clock func- tion. Now it’s 11:30 SNMP Manager function (refer to the separated booklet) A f unc tion to manage the PJ1 PJ2 P
ページ10に含まれる内容の要旨
Computer environment Chapter 1 Preparation Operating Environment Operating environment of PJ-Net Organizer To perform the managing and setting of the projector by using this product, the environ- ment described below is required. Standard mode Windows 98, Windows Me, Windows NT4.0SP6 Operating System Windows 2000, Windows XP Higher than Pentium III 900MHz Recommended CPU 64MB (Minimum)/ 128MB or more (Recommended) Memory 128MB or more for Windows XP HDD free area 100MB or more Drive equipment C
ページ11に含まれる内容の要旨
Quick Setup Guide *1 The limitation of connection between this product and hub or computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Maximum length 2 Network Unit - Hub UTP Straight Cable with category 3 or 5 * 100m 2 Network Unit - Computer UTP Cross Cable with category 3 or 5* 100m *1 There may be other limitations depending on your network environment or LAN specification. Please consult your network administrator for further details
ページ12に含まれる内容の要旨
Chapter 1 Preparation Before use Following contents are required to use the PJ Camera Viewer function. ❑ Network Camera 1 piece Camera Packaging box ❑ Software CD-ROM 1 piece PJ Camera Viewer software Network Viewer & Capture 3 software * * PLV-80/75 series projector does not support this software. ❑ Camera mounting tool set Hook and loop fastener (big) 1 piece Hook and loop fastener (small) 1 piece Cable fixer 1 piece Envelope Ferrite core 1 piece Double-sided adhesive tape* 1 piece S
ページ13に含まれる内容の要旨
Notice Expression/Abbreviation The word "projector" found in this manual means "projector provided with Network unit" unless otherwise noted. The OS of the computer and the Web browser described in this manual is Windows XP Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc- tion procedures may differ from the actual operation depending on your computer envi- ronment. Use of this manual This manual does not provide the description of basic operation and
ページ14に含まれる内容の要旨
Chapter 1 Preparation 1
ページ15に含まれる内容の要旨
Chapter 2 2 Installation Describes how to install the network unit and software, and config- ure the network. 1 PJ-NET ORGANIZER 15 OWNER'S MANUAL [PLV-80/75 Series] ENGLISH
ページ16に含まれる内容の要旨
Chapter 2 Installation Flow of installation The following are instructions for attaching this product to the projector and connecting it to the network. Please review the entire procedure to become familiar with it. 1 Function of the network unit (+ p.17) Explains the name and functions of each part of the network unit. Installation and network configuration (+ p.18-24) 2 1 Mount this product onto the projector. 2 Connect the LAN cable and join it to the network. 3 Configure the network of th
ページ17に含まれる内容の要旨
DC OUT O D CONTR L PORT VI EO IN DC OUT CONTROL PORT VIDEO IN Name and function of each part [1] Name and function of each part (Top View) POWER indicator This lights up red when the network function is set ON in the projector menu. Mounting screws Mount by using a coin etc. (+ p.18) ACT indicator This turns on and off with green when sending or receiving of data LINk indicator This lights up red when the network unit is connected to the network correctly. (Bottom View) Connector plug Co
ページ18に含まれる内容の要旨
Chapter 2 Installation [2] Installation and network configuration Mounting 1 Disconnect the AC plug from the projector. Connector cover 2 R emove the connector cover and screw covers (2 pieces) from the projector and insert plug on this product to the option connector. Screw cover 3 T ighten two screws by using a coin etc. ! Caution ✐ AC cord must be disconnected when mounting or removing this product otherwise it may dam- age the product. ✐ D o not install multiple network units into a p
ページ19に含まれる内容の要旨
Installation and network configuration Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) straight cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distrib- ute the network cable if required. 1 D isconnect the AC plug from the projector. 2 Connect the UTP straight cable to the LAN port on the network uni
ページ20に含まれる内容の要旨
DC OUT CONTROL PORT VIDEO IN Chapter 2 Installation Network configuration Confirmation of the network menu When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item "Mounting" (+ p.18). Configure the network Before performing the network configuration, prepare network address numbers (IP Address, Subnet Mask, Default Gateway, DNS) assigned
