Dell OptiPlex 740 740-DTの取扱説明書

デバイスDell OptiPlex 740 740-DTの取扱説明書

デバイス: Dell OptiPlex 740 740-DT
カテゴリ: パソコン
メーカー: Dell
サイズ: 7.02 MB
追加した日付: 5/4/2013
ページ数: 217
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスDell OptiPlex 740 740-DTの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Dell OptiPlex 740 740-DTに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Dell OptiPlex 740 740-DTをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Dell OptiPlex 740 740-DTのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Dell OptiPlex 740 740-DTの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Dell OptiPlex 740 740-DT 取扱説明書 - Online PDF
Advertisement
« Page 1 of 217 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Dell OptiPlex 740 740-DTを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Dell OptiPlex 740 740-DTの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Dell™ OptiPlex™ 740 User's Guide
 
 Mini Tower Computer

 Desktop Computer

 Small Form Factor Computer

Back to Contents Page

ページ2に含まれる内容の要旨

Back to Contents Page   Advanced Features Dell™ OptiPlex™ 740 Systems User's Guide   LegacySelect Technology Control   Jumper Settings   Manageability   Clearing Forgotten Passwords   Security   Clearing CMOS Settings   Password Protection   HyperTransport™ and Dual-Core Technology   Trusted Platform Module (TPM)   Power Management   System Setup   About RAID Configurations   Booting to a USB Device   Enabling Cool 'n' Quiet™ Technology   LegacySelect Technology Contr

ページ3に含まれる内容の要旨

A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For information about Dell OpenManage Client Instrumentation, see the Dell OpenManage Client Instrumentation User's Guide available on the Dell Support website at support.dell.com.  Security   Chassis Intrusion Detection NOTE: When the administrator password is enabled, you must know the administrator password before you can reset the Chassis Intrusion setting. This featur

ページ4に含まれる内容の要旨

NOTICE: If you leave your computer running and unattended without having a system password assigned, or if you leave your computer unlocked so that someone can disable the password by changing a jumper setting, anyone can access the data stored on your hard drive.   Option Settings You cannot change or enter a new system password if either of the following two options is displayed: l  Set — A system password is assigned. l  Disabled — The system password is disabled by a jumper setting

ページ5に含まれる内容の要旨

Deleting or Changing an Existing System Password   1. Enter system setup (see Entering System Setup).   2. Highlight System Password and press .   3. When prompted, type the system password.   4. Press twice to clear the existing system password. The setting changes to Not Set. If Not Set is displayed, the system password is deleted. If Not Set is not displayed, press , press the left- and right-arrow keys to highlight Save/Exit, and then press

ページ6に含まれる内容の要旨

To change an existing administrator password, you must know the administrator password.   1. Enter system setup (see Entering System Setup).   2. Type the administrator password at the prompt.   3. Highlight Admin Password and press the left- or right-arrow key to delete the existing administrator password. The setting changes to Not Set. To assign a new administrator password, perform the steps in Assigning an Administrator Password.   4. Exit system setup.   Disabling

ページ7に含まれる内容の要旨

l  To read the current amount of memory or set the type of hard drive installed Before you use system setup, it is recommended that you write down the system setup screen information for future reference.   Entering System Setup   1. Turn on (or restart) your computer.   2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.    3. Once this F2 prompt appears, press immediately. NOTE: The F2 prompt indicates that the keyboard has initiali

ページ8に含まれる内容の要旨

( default)   NOTE: If USB is selected, ensure that USB Controller setup option under Onboard Devices is set to On. SATA 0 through Identifies and enables and disables the drives attached to the SATA connectors on the system board and SATA n lists the capacities for the hard drives.   NOTE: These options appear as SATA 0 through SATA 3 for the mini tower, SATA 0 through SATA 2 for the desktop, and SATA 0 and SATA1 for the small form factor. External SATA Identifies and enables and disab

ページ9に含まれる内容の要旨

selection only matters if there are two video controllers present. When Auto is selected, the add-in video controller will be used.   ( NOTE: A PCI Express graphics card will override the integrated video controller. Video Memory This setting configures the amount of system memory that is reserved for the integrated video controller. The settings are Auto, 16MB, 32MB, 64MB, 128MB, or Off. ( HDD Acoustic Mode ( default) l  Bypass — Your computer does not test or change the current

ページ10に含まれる内容の要旨

decrease the numbers, or type numbers in both the date and time fields. Low Power When Low Power Mode is selected, remote wakeup events will no longer power up the computer from Hibernate or Off via the onboard network controller. ( Remote This option allows the system to power up when a Network Interface Controller or Remote Wakeup-capable modem receives a wake up signal. - On is the default setting. On w/ Boot to NIC will allow the computer to attempt to boot from a network prior to

ページ11に含まれる内容の要旨

NOTE: To boot to a USB device, the device must be bootable. To ensure that a device is bootable, check the device documentation.   Changing Boot Sequence for Future Boots   1. Enter system setup (see Entering System Setup).   2. Use the left- and right-arrow keys to highlight the Boot menu option, then press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it.   3. Press the up- and down-arrow keys to highlight the appropriate B

ページ12に含まれる内容の要旨

      Jumper Setting Description PSWD Password features are enabled (default setting). Password features are disabled.    jumpered    unjumpered  Clearing Forgotten Passwords   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: This process erases both the system and administrator passwords.   1. Follow the procedures in Before You Begin.   2. If clearing the password on a small for

ページ13に含まれる内容の要旨

  15. Connect your computer and devices to electrical outlets, and turn them on. NOTE: This procedure enables the password feature. When you enter system setup, both system and administrator password options appear as Not Set—meaning that the password feature is enabled but no password is assigned (see Entering System Setup).   16. Assign a new system and/or administrator password.  Clearing CMOS Settings   CAUTION: Before you begin any of the procedures in this section, follow t

ページ14に含まれる内容の要旨

Sleep Mode Wake-Up Methods (Windows XP) Standby l  Press the power button l  Auto power on l  Move or click the mouse l  Type on the keyboard l  USB device activity l  Power management event Hibernate l  Press the power button l  Auto power on l  Power management event Shutdown l  Press the power button l  Auto power on l  Power management event NOTE: For more information on power management, see your operating system documentation.  About RAID Configurations NOTICE: In order to

ページ15に含まれる内容の要旨

NOTE: In a RAID level 0 configuration, the size of the configuration is equal to the size of the smallest drive multiplied by the number of drives in the configuration.   RAID Level 1 Configuration RAID level 1 uses a data-redundancy storage technique known as mirroring to enhance data integrity. When data is written to the primary drive, the data is also duplicated, or mirrored, on the second drive in the configuration. A RAID level 1 configuration sacrifices high data-access rates for its

ページ16に含まれる内容の要旨

  3. Press when prompted to enter the RAID BIOS. NOTE: If the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then shut down your computer and try again. The Define a New Array window appears.   4. Press to navigate to the RAID Mode field. To create a RAID 0 configuration, use the arrow keys to select Striping. To create a RAID 1 configuration, use the arrow keys to select Mirroring.   5. Press to navigate to the

ページ17に含まれる内容の要旨

  5. Click Custom, then click Next.   6. Use the drop-down box to select Striping (RAID 0) or Mirroring (RAID 1).   7. Click Next. The Free Disk Selection window appears. NOTE: Only RAID-enabled hard drives are listed as free disks.   8. Click to select the drives that will make up the RAID configuration, click Next, and then click Next again. NOTE: Your computer supports a maximum of two drives per RAID array. The Clearing System Data window appears. NOTICE: The Clea

ページ18に含まれる内容の要旨

The NVIDIA Convert Array Wizard appears.   4. Click Next.   5. Under RAID Mode Selection, select Mirroring or Striping from the drop-down menu.   6. Click Next. NOTICE: You will lose all data on the selected drives in the next step.   7. Under Free Disk Selection, select the hard drive(s) you want to include in the (migrated) array by clicking the checkbox beside it.   8. Click Finish. The MediaShield RAID management utility window appears and displays the status

ページ19に含まれる内容の要旨

Back to Contents Page   Battery Dell™ OptiPlex™ 740 Systems User's Guide   Replacing the Battery  Replacing the Battery   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on

ページ20に含まれる内容の要旨

1 system battery 2 positive side of battery connector 3 battery socket 4 battery socket tab         NOTICE: To avoid damage to the battery connector, you must firmly support the connector while replacing the battery.   6. Install the new system battery. a.  Support the battery connector by pressing down firmly on the positive side of the connector. b.  Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector. c.  Pres


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Dell 1100 取扱説明書 パソコン 5
2 Dell 100L 取扱説明書 パソコン 0
3 Dell 1300 取扱説明書 パソコン 5
4 Dell 1428 取扱説明書 パソコン 4
5 Dell 1500 取扱説明書 パソコン 9
6 Dell 1510 取扱説明書 パソコン 12
7 Dell 1310 取扱説明書 パソコン 0
8 Dell 1600SC 取扱説明書 パソコン 4
9 Dell 160 取扱説明書 パソコン 2
10 Dell 160L 取扱説明書 パソコン 0
11 Dell 170L 取扱説明書 パソコン 4
12 Dell 1764 取扱説明書 パソコン 2
13 Dell 1710 取扱説明書 パソコン 0
14 Dell 2010 取扱説明書 パソコン 1
15 Dell 230S 取扱説明書 パソコン 1
16 Sony PCG-R505TSK 取扱説明書 パソコン 0
17 Sony PCG-V505DC2 取扱説明書 パソコン 2
18 Sony MX 取扱説明書 パソコン 1
19 Sony PCV-L400 取扱説明書 パソコン 5
20 Sony PCG-V505DC1 取扱説明書 パソコン 2