ページ1に含まれる内容の要旨
1
Introduction
SIMATIC Industrial PC SIMATIC IPC427C
2
Safety Instructions
______________
______________
3
Description
______________
4
Application planning
SIMATIC
______________
5
Installing/mounting
______________
6
Industrial PC
Connecting
SIMATIC IPC427C ______________
7
Commissioning
_ Integrat _____________ ion into an
8
Automation System
Operating Instructions
______________
9
Functions
______________
Expansions and
10
Configurations
______________
11
ページ2に含まれる内容の要旨
Legal information Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal inju
ページ3に含まれる内容の要旨
Table of contents 1 Introduction................................................................................................................................................ 7 1.1 Preface...........................................................................................................................................7 1.2 Guideline to the Operating Instructions .........................................................................................8 2 Safety Instructions ....
ページ4に含まれる内容の要旨
Table of contents 7 Commissioning ........................................................................................................................................ 37 7.1 Note before commissioning......................................................................................................... 37 7.2 Commissioning - Windows Embedded Standard 2009 .............................................................. 38 7.2.1 Basic commissioning - initial startup....................
ページ5に含まれる内容の要旨
Table of contents 11.2.2.2 Restoring the Software to Factory State Using the Restore DVD ...............................................77 11.2.2.3 Setting up the operating system via the Recovery CD/DVD .......................................................79 11.3 Partitioning data media ................................................................................................................81 11.3.1 Setting up the partitions under Windows Embedded Standard 2009.................
ページ6に含まれる内容の要旨
Table of contents 16.1.4.2 Compact Flash card interface ................................................................................................... 111 16.1.4.3 PCI-104 or PC/104-Plus interface (PCI part)............................................................................ 112 16.2 BIOS Setup ............................................................................................................................... 113 16.2.1 Overview ...................................
ページ7に含まれる内容の要旨
1 Introduction 1.1 Preface Objective of this documentation These operating instructions contain all the information you need for commissioning and operation of the SIMATIC IPC427C. It is intended both for programming and testing personnel who commission the device and connect it with other units (automation systems, programming devices), as well as for service and maintenance personnel who install add-ons or carry out fault/error analyses. Basic knowledge requirements A solid backgro
ページ8に含まれる内容の要旨
Introduction 1.2 Guideline to the Operating Instructions 1.2 Guideline to the Operating Instructions Contents format Table of Contents Contents Organization of the documentation, including the index of pages and chapters Introduction Purpose, layout and description of the important topics. Safety instructions Refers to all the valid technical safety aspects which have to be adhered to while installing, commissioning and operating the product/systemin and in reference to statutory r
ページ9に含まれる内容の要旨
2 Safety Instructions 2.1 General safety instructions CAUTION Please observe the safety instructions on the back of the cover sheet of this documentation. You should not expand your device unless you have read the relevant safety instructions. This device is compliant with the relevant safety measures to IEC, EN, VDE, UL, and CSA. If you have questions about the validity of the installation in the planned environment, please contact your service representative. Repairs Only
ページ10に含まれる内容の要旨
Safety Instructions 2.1 General safety instructions Battery This device is equipped with a Lithium battery. Batteries may only be replaced by qualified personnel. CAUTION There is the risk of an explosion if the battery is not replaced as directed. Replace the battery only with the same type or with an equivalent type recommended by the manufacturer. Dispose of used batteries in accordance with local regulations. WARNING Risk of explosion and release of harmful substances! F
ページ11に含まれる内容の要旨
3 Description 3.1 Overview The SIMATIC IPC427C provides high-level industrial performance. ● Compact design ● Maintenance-free operation ● High degree of ruggedness Figure 3-1 SIMATIC IPC427C SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743-01 11
ページ12に含まれる内容の要旨
Description 3.2 Applications 3.2 Applications The device provides industrial PC systems for high-performance and space-saving applications in particular in the field of machine, systems and switchgear cabinet engineering: ● Measuring and controlling of process and machine data (for example, automated washing systems, assembling machines, packaging machines) ● Operating and visualization tasks with separate display / monitor solutions (information terminals, large-scale displays in au
ページ13に含まれる内容の要旨
Description 3.3 Features 3.3 Features Basic data • Installation on a DIN rail Installation / mounting • Wall mounting • Vertical mountin • Hanging assembly Processor • Intel Celeron M 1.2 GHz, 800 MHz FSB, 1 MB SLC or • Intel Pentium Core 2 Solo 1.2 GHz, 800 MHz FSB, 3 MB SLC or • Intel Pentium Core 2 Duo 1.2 GHz, 800 MHz FSB, 3 MB SLC • 512 MB DDR3-SDRAM SODIMM Main memory • 1 GB DDR3-SDRAM SODIMM • 2 GB DDR3-SDRAM SODIMM • 4 GB DDR3-SDRAM SODIMM Free slots for expansi
ページ14に含まれる内容の要旨
Description 3.3 Features Basic data Ports Serial COM1 (RS232) COM2 (RS232); optional Graphics DVI-I: combined DVI and VGA USB 4 x USB 2.0 high current Ethernet 2 x RJ 45 (10/100/1000 Mbps) PROFIBUS DP 12 Mbps (isolated potential, compatible to CP 5611), optional CAN interface Optional Keyboard, mouse Connected via external USB port Monitoring and safety functions • When permitted temperature range is exceeded Temperature • Warnings can be analyzed by application program (
ページ15に含まれる内容の要旨
Description 3.4 Windows Embedded Standard 2009 3.4 Windows Embedded Standard 2009 The supplied Windows Embedded Standard has the product version 2009. The overview shows the basic device functions under Windows Embedded Standard 2009: Function Hard disk / SSD version Compact Flash card version Enhanced Write Filter (EWF) In RAM RAM(REG) In RAM RAM(REG) SIMATIC IPC DiagBase Available V 1.2 Available V 1.2 Pagefile Deactivated in favor of the Deactivated in favor of the EWF EWF Syst
ページ16に含まれる内容の要旨
Description 3.4 Windows Embedded Standard 2009 Function Hard disk / SSD version Compact Flash card version CoDevice Installer Available Available Windows Movie Maker Available V 2.1 Not available Media Player Available, V11.0 Available, V11.0 Windows Media Player Tour Available Not available DirectX V9.0c V9.0c Accessories Available Available Help files for all components Available Not available Games Available Not available Fonts 316 118 Windows XP Tour Available Not available Mi
ページ17に含まれる内容の要旨
Description 3.5 Design 3.5 Design 3.5.1 External Design Device components Pos Description ① Cover plate for Compact Flash module ② Connection elements ③ Status displays SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743-01 17
ページ18に含まれる内容の要旨
Description 3.5 Design 3.5.2 Connection components Ports and power supply Location of connection elements (version with PROFIBUS or CAN) Pos Name Description ① 24 VDC Connection for a 24 V DC power supply ② DVI/VGA DVI/VGA connection for CRT or LCD monitor with DVI interface ③ USB 4 USB 2.0 connections, high-speed / low current ④ PN/IND. ETHERNET RJ45 Ethernet connection 1 (exclusive PCI interrupt) for 10/100/1000 Mbps ⑤ PN/IND. ETHERNET RJ45 Ethernet co
ページ19に含まれる内容の要旨
Description 3.5 Design 3.5.3 Operator controls On/Off switch CAUTION The On/Off switch does not disconnect the device from the supply voltage. Position of on/off switch Pos Description ① The on/off switch turns off the output voltages of the power supply but not disconnect from the supply system. The delivery condition is: Power switch turned off. SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743-01 19
ページ20に含まれる内容の要旨
Description 3.5 Design 3.5.4 Status displays Status displays LED Meaning LED Description PWR Power supply OFF Standby mode GREEN Supply voltage available WD Watchdog status display OFF Watchdog disabled Watchdog GREEN enabled, monitoring time not expired Watchdog enabled, monitoring RED time expired L1 User LED L1 OFF Can be controlled by user 1 YELLOW programs RED SF Group errors RED Can be controlled by controller 1 program (e.g. WinAC) L2 User LED L2 OFF Can be
