ページ1に含まれる内容の要旨
User Manual
MULTI - CODEC CD PLAYER / FM TUNER
Model iMP-400
TM
Model iMP-400
Thank you for purchasing the product.
Please read the manual carefully before use.
ページ2に含まれる内容の要旨
Introducing the iRiver website Unique Features of iRiver SlimX URL : http://www.iRiver.com Multi-Codec CD Player : Supports MP3, WMA and ASF format as well as conventional Audio CD. Provides information on our company, products, and email addresses for Firmware Upgrade support. : Provides the latest updated features via free downloads from our website. New formats such as AAC, MP3Pro and Ogg Vorbis, (if supported by iRiver Unique feature of "Firmware (system software) Upgrade" is available for i
ページ3に含まれる内容の要旨
Table of Contents Locating Controls(Player) 1. Locating the Controls Front Player Front & Back.......................................................... 4 Player Side........................................................................ 5 Remote Control, LCD Window.......................................... 6 2. Getting started Power Supply(Batteries)................................................... 7 Playing Disc Media........................................................... 8~9 Playing FM
ページ4に含まれる内容の要旨
Locating Controls(Player) Locating Controls(Remote Control) Remote Control Side NAVI / MENU, PRESET PLAY / PAUSE/MUTE LINE OUT STOP REMOTE CONTROL/ or EARPHONE Inside LCD Window BATTERY COMPARTMENT EXTENSION BATTERY PORT DC IN 4.5V - 5 - - 6 -
ページ5に含まれる内容の要旨
Power Supply(Battery) Playing a Disc Using Rechargeable Batteries Slide open button, open the player lid and insert the disc. Lift the cover of player and remove the covers of batteries compartment. Insert two rechargeable batteries (stick type) by matching the + and - polarity (see diagram below) in the battery compartments and close the covers. Connect Remote Control and Earphone. Using External battery pack The external battery pack can be attached as shown in the figure. Two AA Slide HOLD
ページ6に含まれる内容の要旨
Operating the FM Tuner Playing a Disc While playing a CD, you can switch back and forth between CD and FM mode with a long click of the Mode/CD/FM Stereo button. Select Stereo/Mono Power Off Play/Pause Play Next Folder Selecting Frequency(FM 87.5MHz ~ 108MHz) 1 To change frequency, press and release the Navi/Menu jog switch (ex : 87.5 87.6) CD FM Changing Play Previous Folder or . GO Forward Quickly STOP 2 Auto Scan function: To select memorized channel, push the Navi/Menu jog switch and find
ページ7に含まれる内容の要旨
Operating the FM Tuner Operating the Remote Control Memory Function (Save channels) The remote control operates every function using 3 jog switchs and two buttons. 1 Select the channel by pushing the jog switch or . Main unit and Remote control 2 B both locked. M Only Main unit is locked. R Only Remote control is locked. NAVI / MENU, PRESET Push or again and select the desired channels. Save complete Select CH02 PLAY / PAUSE/MUTE 3 Up to 20 channels can be memorized. STOP 4
ページ8に含まれる内容の要旨
Navigation Operating the Remote Control Basic Operation Navigation is the function used to search tracks. Volume Control: Slide jog lever to the right to increase volume or to the left to decrease You can find the desired song by using volume. and buttons. Changing Mode : (Refer to page 27) 1 NAVI/MENU button, CD FM Changing : NAVIGATION Scroll up Scroll down 2 Press the Navi/Menu jog lever with a short click and find the desired track by pressing or . To play the
ページ9に含まれる内容の要旨
Program Mode Mode You can enjoy various ways of playing by using playback mode. Program mode: Play tracks in your own playlists. Please refer to the function controls (page 27) for user-defined configurations. Select Program/Playlist: Playback play lists if the disc contains WinAmp play list When MODE/CD/ FM jog *.m3u files. (Refer to page 31) switch is pushed, icon in the playback mode indicator is changed. Activating Program mode REPEAT At stop mode Play a single track repeatedly. Play
ページ10に含まれる内容の要旨
Program -10,+10/EQ Mode Program play -10/+10 MODE After programming, press to play the tracks in sequential order. During playback, push the jog lever to -10 to go back to the previous 10th track, and push it to +10 to go forward to the next 10th track. Program mode icon appears iRiver ShockFree Toggle On/Off by sliding "PROG/EQ/MEMORY" Cancel Program Mode button +10 side during PLAY mode. Caution: Poorly recorded CDs may have inferior While Playing disc readability while the iR
ページ11に含まれる内容の要旨
Menu (Function Controls) PLAYER’S CONTROLS Function Control is subject to change with different firmware versions. Users can configure their own settings. Configuration 1. Earphones Jack : Connect Earphones/Remote Control. 2. Line Out Jack : To record from the iMP-400 to other equipment or to connect the car kit or other audio equipment(speaker etc.).. 3. FM CD conversion FM : To select FM channel Click or buttons. Function Control Option can only be configured in CD Mode. CD Playback
ページ12に含まれる内容の要旨
Menu (Function Controls) Menu(General) Scroll between Menu GENERAL Press or to move within BEEP VOLUME main menu and sub menu. : Configure beep sound (ON/ 0 for OFF) with volume level. RESUME : When activated, player returns to the same From Main Menu to Sub Menu settings after STOP or Power OFF. SOUND FADE IN : When activated, volume increases gradually at playback mode to prevent sudden loudness. Enter Sub Menu LANGUAGE(Supports 37 languages) : When activated, displays
ページ13に含まれる内容の要旨
Menu(Display) Menu(Timer, Control) DISPLAY BATTERY INDICATOR Adjust level of battery indicator. BACK-LIGHT(SEC) If select lower number, the level of battery BUTTON : Backlight is on. indicator is higher. And if select higher number, ADAPTER : If the adapter is connected, the level of battery indicator is lower. backlight is always on and if the adapter is disconnected, backlight is on whenever you press the button. TIMER(Set Auto Power Off) ds. 0 : Backlight is off. 21 : Backlight is alway
ページ14に含まれる内容の要旨
Menu(Control) Menu(Control) FF/RW SKIP ADAPTER VOLUME OFF: No use of FF/RW skip. 35 ON : When the Adapter is connected, the 10 : Playback previous or next 10th track. volume always remains at level 35. Folder : Skip to previous or next directory. OFF : No use of Adapter volume. It is useful when using by connecting Car Audio. FF/RW SCAN SPEED SOUND BALANCE The fast scan speed can range from 1x/2x/ Balance your sound to the right or left or keep 4x/6x. It is useful when studying a it in the c
ページ15に含まれる内容の要旨
Menu(Playback Mode) Menu(Playback Mode) MODE STUDY MODE REPEAT MODE / SHUFFLE MODE (Page15) BEEP : This mode has been devised for the : A number of Repeat and Shuffle modes are available. Select the one you visually impaired. want by pressing Navi/Menu to enter the Mode menu. It allows the user to know each button's Selection Method movement using a beep sound. When 5 SEC MODE is set it will forward to the next 5 seconds within the song with a short slide of Press ,
ページ16に含まれる内容の要旨
Menu(Playback Mode) Menu (User EQ) MODE USER EQ NAME BASS BOOST : You can input your name or text. : Bass Boost switch is from 0 to 12dB. 12dB equals maximum bass boost. Button Operation Select the character by using and button and press Navi/Menu button to input the character. To delete the BASS CORNER FREQUENCY character, push MODE switch. : Bass Boost frequencies are 50HZ, 100Hz and 200Hz. Bass boost function is effective under the frequency range configured. Maximized at 200Hz. To
ページ17に含まれる内容の要旨
Support WinAmp Play list Support WinAmp Play list 5 Pressing Navi/Menu or button will play USING WINAMP PLAYLIST selected play list in sequential order. 1 Build up a Winamp playlist by adding the extension .m3u at the end of the file name. Icon stands for playback of play list Winamp Execution Screen 1. Open WinAmp, add songs to build-up play list. 2. Press List OPTS button in the right button 6 Maximum 20 play lists within the disc can be recognized. and open SAVE LIST. RESE
ページ18に含まれる内容の要旨
Power Supply(Adapter) Power Supply(Rechargeable Batteries) Recharging Method Using AC POWER ADAPTER Rechargeable function can be activated while the rechargeable batteries are Use only the AC Power Adapter supplied with the player. in the player and the AC adapter is connected to the player. Power Off activates rechargeable function displaying Charge mode on LCD Connect the adapter to the 4.5V DC jack on the player and into an AC outlet. when plugged into AC adapter. While in Charge Mode, lon
ページ19に含まれる内容の要旨
Trouble Shooting Trouble Shooting Should any problem persist after you have checked these Should any problem persist after you have checked these symptoms, consult your iRiver dealer. symptoms, consult your iRiver dealer. AC adapter does not work. Connect adapter to test the battery life. Check whether the plug is connected to the Check whether the HOLD switch on player or proper jack on the player. remote is ON (Switch to OFF position) No Power On Check whether the player lid is opened. Chec
ページ20に含まれる内容の要旨
Precautions Precautions Disc On Player On Handling Disc Keep the lens on the SlimX clean and do not touch it. If you do so, the lens Avoid touching the surface(bright side) may be damaged and the SlimX will not operate properly. where data is stored. Do not put any heavy object on top of the SlimX. The SlimX and the CD may be damaged. Disc Cleaning Avoid cleaning the disc surface. If Do not leave the SlimX in a location near heat sources, or in a place subject necessary, clean with a soft c
