ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Introduction IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” 10. Power Sources — The CA-570 Compact E Power Adapter should be operated only refers to the Canon Digital Video Camcorder from the type of power source indicated ELURA 100 A and all its accessories. on the marking label. If you are not sure of 1. Read Instructions — All the safety and the type of power supply to your home, operating instructions should be read consult your product dealer or local
ページ4に含まれる内容の要旨
18.Damage Requiring Service — Disconnect EXAMPLE OF ANTENNA GROUNDING AS PER Fig. 1 this product from the wall outlet and all NATIONAL ELECTRICAL CODE power sources including the battery, and refer servicing to qualified service ANTENNA LEAD IN personnel under the following conditions: WIRE a. When the power-supply cord or plug is GROUND damaged. ANTENNA DISCHARGE CLAMP UNIT (NEC SECTION 810-20) b. If any liquid has been spilled onto, or ELECTRIC objects have fallen into, the product. G
ページ5に含まれる内容の要旨
Introduction Using this Manual Thank you for purchasing the Canon ELURA 100. Please read this manual carefully E before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to the Troubleshooting table (110). Symbols and References Used in this Manual : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. : Reference page number. Capital letters are used to refer to bu
ページ6に含まれる内容の要旨
The functions assigned to the joystick change according to the operation mode. You can display the joystick guide to remind you of the joystick’s functions in each operating mode. Recording movies: Playing back movies: Recording still images: Playing back still images: EXP EXP FOCUS FOCUS Selecting the Operating Modes The camcorder’s operating mode is determined by the positions of the power and TAPE/ CARD switches. Operating TAPE/CARD Icon Display Operation Modes Switch Switch Recording movie
ページ7に含まれる内容の要旨
Introduction Table of contents Introduction E Using this Manual............................................................................................5 Checking the Supplied Accessories ................................................................9 Components Guide........................................................................................10 Screen Displays.............................................................................................14 Preparation Step 1: Prepa
ページ8に含まれる内容の要旨
Playback Magnifying the Image ....................................................................................71 Displaying the Data Code..............................................................................72 End Search....................................................................................................73 Returning to a Pre-marked Position ..............................................................74 Date Search......................................................
ページ9に含まれる内容の要旨
Introduction Checking the Supplied Accessories CA-570 Compact BP-208DG Battery Lithium Button Battery WL-D85 Wireless Power Adapter Pack CR1616 Controller E (incl. power cord) Lithium Button Battery STV-250N Stereo IFC-300PCU USB DIGITAL VIDEO CR2025 for the Video Cable Cable SOLUTION DISK Wireless Controller The serial number of this product can be found at the battery attachment unit of the camcorder. Write down the number and other information here and retain this book as a permanent reco
ページ10に含まれる内容の要旨
Components Guide ELURA 100 Left side view Right side view Lens Cover Switch ( 28, 31) Grip belt ( 21) ( - open, - closed) CARD access indicator ( 31) / Battery attachment unit ( 16) CHARGE indicator ( 16) Serial number Memory card slot ( 20)/ Backup battery BATTERY RELEASE button ( 16) compartment ( 23) DV terminal ( 86, 90, 92, 104) Terminal cover USB terminal ( 97, 106) DC IN terminal ( 16) 10
ページ11に含まれる内容の要旨
Introduction Front view E Back view Twin LED light (assist lamp) ( 51) FUNC. button ( 54) Remote sensor ( 22) Mode switch ( 44) Stereo microphone switch ( 6) Viewfinder ( 21) Start/stop button ( 28, 31) Dioptric adjustment lever ( 21) Lock button D.EFFECTS button ( 59) / TAPE/CARD switch ( 6) P.SET button ( 98) WIDE SCR button ( 36) LCD screen ( 24) LCD BACKLIGHT button ( 24) Joystick ( 5) 11
ページ12に含まれる内容の要旨
Top view Bottom view (print/share) button ( 98, 107) OPEN/EJECT switch ( 19) Zoom lever ( 34) Cassette compartment cover ( 19) PHOTO button ( 31) AV terminal ( 42, 88, 92, 94) Speaker ( 41) MIC (microphone) terminal ( 53) LIGHT button ( 51) Strap mount ( 124) Cassette compartment ( 19) Tripod socket ( 37) 12
ページ13に含まれる内容の要旨
Introduction Wireless Controller WL-D85 E START/ STOP PHOTO ZOOM CARD DATE SEARCH REW PLAY FF STOP PAUSE SLOW ZERO SET AUDIO DUB. MEMORY TV SCREEN WIRELESS CONTROLLER WL-D85 START/STOP button ( 28, 31) PHOTO button ( 31) CARD –/+ buttons ( 40) Zoom buttons ( 34) DATE SEARCH / buttons ( 75) PLAY button ( 38) REW button ( 38) FF button ( 39) –/ button ( 39) STOP button ( 38) PAUSE button ( 39) +/ button ( 39) SLOW button ( 39) button ( 39) AUDIO DUB. button ( 94) TV SCREEN button ( 67) ZERO
ページ14に含まれる内容の要旨
Screen Displays Screen Displays during Recording When recording movies on a tape Operating mode ( 6), Zoom ( 34), () Exposure ( 48) Recording program ( 44) White balance ( 56) Image effect ( 58) Self-timer ( 52) Drive mode ( 80) Digital effects ( 59) Movie size ( 76) Still image quality/size ( 76) Condensation ( 113) Recording reminder ( 29) Manual focus ( 49) Image stabilizer ( 65) When recording on a memory card Recording mode ( 66) () Tape operation ( 15) Time code ( 29) Remaining tape ( 2
ページ15に含まれる内容の要旨
Introduction Screen Displays during Playback When playing a tape ( ) 12 bit audio ( 95) End search ( 73), Date search ( 75), E Audio dubbing ( 94) Digital effects ( 59) Movie size ( 96) Still image quality/size ( 78) Recording mode ( 66) Tape operation Time code ( 29) Remaining tape ( 29) Joystick guide ( 5) Data code ( 72) Tape operation : Record / : Fast forward playback/ / : Frame advance playback/ : Pause Rewind playback ( 39) Frame reverse playback : Stop x2 / x2: Playback at twice normal
ページ16に含まれる内容の要旨
Preparation Step 1: Preparing the Power Supply The camcorder can be powered by a battery pack or be connected to a household power source. Charge the battery pack before use. Attaching the Battery Pack 1. Turn the switch to . 2. Open the LCD panel. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks. To remove the battery pack: 1. Open the
ページ17に含まれる内容の要旨
Preparation Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. E 1. Turn the switch to . 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Open the front terminal cover and connect the power adapter to the camcorder’s DC IN terminal. Turn off the camcorder before connecting or disconnect
ページ18に含まれる内容の要旨
Charging, Recording and Playback Times The following times are approximate and vary according to the charging, recording or playback conditions. Battery Pack BP-208DG Charging Time 165 min. Max. Recording Time Viewfinder 150 min. LCD normal 150 min. bright 140 min. Typical Recording Time* Viewfinder 85 min. LCD normal 85 min. bright 80 min. Playback Time 175 min. * Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. We recommend charging the ba
ページ19に含まれる内容の要旨
Preparation Step 2: Loading a Cassette Use only videocassettes marked with the logo. 1. Slide the OPEN/EJECT switch E and open the cassette compartment cover. The cassette compartment opens automatically. 2. Load the cassette. • Load the cassette with the window facing the grip belt. • Unload the cassette by pulling it straight out. 3. Press the mark on the cassette compartment until it clicks. 4. Wait for the cassette compartment to retract automatically and close the cassette compar
ページ20に含まれる内容の要旨
Step 3: Inserting a Memory Card You can use commercially available SD memory cards or MultiMediaCards (MMC) with this camcorder. Inserting the Card 1. Set the switch to . 2. Open the cover. 3. Insert the memory card straight into the memory card slot and push it in until it clicks. 4. Close the cover. If the memory card is not correctly inserted the cover will not close – do not forcefully close the cover. Verify that the memory card is inserted in the correct direction. 5. Turn on the
