ページ16に含まれる内容の要旨
Preparing the Camcorder Adjusting the Viewfinder (Dioptric Adjustment) 1. Turn on the camcorder and keep the LCD panel closed. 2. Adjust the dioptric adjustment lever. Fastening the Grip Belt Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/stop button with your thumb. 16
ページ17に含まれる内容の要旨
Basic Functions Preparations Adjusting the LCD Screen Rotating the LCD Screen E Open the LCD panel 90 degrees. • You can rotate the panel by 90 degrees outward. • You can rotate the panel by 180 degrees inward. LCD Backlight LCD BACKLIGHT button You can switch the brightness of the LCD screen between normal and bright by pressing the LCD BACKLIGHT button. This is useful for outdoor recordings. Press the LCD BACKLIGHT button. This setting does not affect the brightness of the recording or th
ページ1に含まれる内容の要旨
PUB.DIM-735
English
Digital Video Camcorder
English
Instruction Manual
Caméscope numérique
Français
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Español
Digital
Mini
Video
Cassette
NTSC
ページ18に含まれる内容の要旨
Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery. Setting the Time Zone/Daylight Saving Time MENU DATE/TIME SETUP T.ZONE/DST NEW YORK (33) 1. Press the FUNC. button to open the FUNC. menu. The FUNC. menu will open. Continue the procedure with the joystick to open the setup menus. 2. With the joystick select () the icon and press (). 3. Select ( ) the [DATE/TIME SETUP] menu and press
ページ19に含まれる内容の要旨
Basic Functions Preparations 8. Press the FUNC. button to close the menu. E Time Zones and Difference from GMT/UTC. London GMT/UTC Wellington (WELLGTN ) +12 Paris +1 Samoa -11 Cairo +2 Honolulu -10 Moscow +3 Anchorage -9 Dubai +4 Los Angeles (L.A.) -8 Karachi +5 Denver -7 Dacca +6 Chicago -6 Bankok +7 New York -5 Singapore +8 Caracas -4 Tokyo +9 Rio de Janeiro (RIO) -3 Sydney +10 Fernando de Noronha (FERNANDO) -2 Solomon +11 Azores -1 Once you have set time zone, date and time, you do not need t
ページ20に含まれる内容の要旨
Recording Recording Movies on a Tape Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads ( 71). Recording 1. Open the lens cover (move the lens cover switch down to ). 2. Set the camcorder to mode. Set the switch to CAMERA. 3. Open the LCD panel. 4. Press the start/stop button to begin recording. Press the start/stop button again to pause the recording. When You Have Finished Recording 1. Turn the switch
ページ2に含まれる内容の要旨
Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, ZR500 systems This device complies with Part 15 of the FC
ページ3に含まれる内容の要旨
Introduction IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” 10. Power Sources — The CA-570 Compact E Power Adapter should be operated only refers to the Canon Digital Video Camcorder from the type of power source indicated ZR500 A and all its accessories. on the marking label. If you are not sure of 1. Read Instructions — All the safety and the type of power supply to your home, operating instructions should be read consult your product dealer or local powe
ページ4に含まれる内容の要旨
18.Damage Requiring Service — Disconnect EXAMPLE OF ANTENNA GROUNDING Fig. 1 AS PER NATIONAL ELECTRICAL CODE this product from the wall outlet and all power sources including battery, and refer ANTENNA LEAD servicing to qualified service personnel IN WIRE under the following conditions: GROUND a. When the power-supply cord or plug is LAMP ANTENNA DISCHARGE damaged. UNIT (NEC SECTION 810-20) b. If any liquid has been spilled onto, or objects have fallen into, the product. ELECTRIC SER
ページ5に含まれる内容の要旨
Introduction Using this Manual Thank you for purchasing the Canon ZR500. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to E operate correctly, refer to the Troubleshooting table ( 75). Change the display language before you begin ( 59). Symbols and References Used in This Manual : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. : Reference page
ページ6に含まれる内容の要旨
About the Operating Modes The operating modes are determined by the position of the switch. Operating Icon Operation Modes Switch Display Recording movies on a CAMERA 20 tape Playing movies from a PLAY 27 tape : Function can be used in this mode. : Function cannot be used in this mode. Trademark Acknowledgments • is a trademark. ® • Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • Macintosh and Mac OS are tradema
ページ7に含まれる内容の要旨
Introduction Table of contents Introduction E Using this Manual............................................................................................5 Checking the Supplied Accessories ................................................................9 Components Guide........................................................................................10 Basic Functions Preparations Preparing the Power Supply..........................................................................12 Load
ページ8に含まれる内容の要旨
List of Messages............................................................................................69 Maintenance/Others ......................................................................................70 Troubleshooting.............................................................................................75 System Diagram............................................................................................78 Optional Accessories.........................................
ページ9に含まれる内容の要旨
Introduction Checking the Supplied Accessories CA-570 Compact BP-2L5 Battery Pack Lithium Button Battery STV-250N Stereo E Power Adapter CR1616 Video Cable (incl. power cord) The serial number of this product can be found at the battery attachment unit of the camcorder. Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase: Model Name: ZR500 A Purchased From: Serial No.: Dealer Addr
ページ10に含まれる内容の要旨
Components Guide ZR500 Left side view Right side view Lens cover switch ( 20) MIC (microphone) terminal ( 50) ( open, closed) DV terminal ( 63, 65) LCD BACKLIGHT button ( 17) Zoom lever ( 24) Speaker ( 29) Program selector ( 36) CHARGE indicator ( 12) Easy recording Terminal cover Recording programs switch ( 6) Grip belt ( 16) AV terminal ( 30) 10
ページ11に含まれる内容の要旨
Introduction Front view E Rear view Bottom view Stereo microphone Backup battery compartment ( 14) Viewfinder ( 16) Start/stop button ( 20) Dioptric adjustment lever ( 16) Battery attachment unit ( 12) / BATT. (battery release) button ( 12) Serial number LCD screen ( 17) DC IN terminal ( 12) Joystick ( 5) Cassette compartment ( 15) FUNC. button ( 33) Cassette compartment cover ( 15) D.EFFECTS button ( 51) OPEN/EJECT switch ( 15) WIDE SCR button ( 54) / Tripod socket ( 26) DATA CODE button ( 56
ページ12に含まれる内容の要旨
Basic Functions Preparations Preparing the Power Supply Attaching the Battery Pack 1. Turn the switch to . 2. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Press lightly and slide the battery pack in the direction of the arrow until it clicks. Charging the Battery Pack 1. Connect the power cord to the CHARGE indicator adapter. 2. Plug the power cord into a power outlet. 3. Connect the power adapter to the camcorder’s DC IN terminal. The CHAR
ページ13に含まれる内容の要旨
Basic Functions Preparations Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be E consumed. 1. Turn the switch to . 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. Turn off the camcorder before connecting or disconnecting the power adap
ページ14に含まれる内容の要旨
Charging, Recording and Playback Times The following times are approximate and vary according to the charging, recording or playback conditions. Battery Pack BP-2L5 NB-2L NB-2LH BP-2L12 BP-2L14 Charging Time 95 min. 110 min. 125 min. 195 min. 220 min. Max. Recording Time Viewfinder 90 min. 105 min. 125 min. 220 min. 270 min. LCD normal 85 min. 100 min. 120 min. 215 min. 260 min. bright 80 min. 90 min. 110 min. 200 min. 240 min. Typical RecordingTime* Viewfinder 50 min. 55 min. 65 min. 120 min.
ページ15に含まれる内容の要旨
Basic Functions Preparations Loading/Unloading a Cassette Use only videocassettes marked with the logo. E 1. Slide the OPEN/EJECT switch Tape protection tab and open the cassette compartment cover. The cassette compartment opens automatically. 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt. • Unload the cassette by pulling it straight out. 3. Press the mark on the cassette compartment until it clicks. 4. Wait for the cassette compartment to retra
