ページ1に含まれる内容の要旨
COMPACT VHS CAMCORDER
ENGLISH
GR-AXM917UM
INSTRUCTIONS
LYT0299-001A EN
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (Z pg. 8). •Notes appear after most subsections. Be sure to read these as well. •Basic and advanced features/operation are separated for easier reference. It is recommended that you .
ページ3に含まれる内容の要旨
EN3 IMPORTANT PRODUCT ANTENNA INSTALLATION INSTRUCTIONS SAFETY INSTRUCTIONS 1. Outdoor Antenna Grounding Electrical energy can perform many useful functions. If an outside antenna or cable system is connected to But improper use can result in potential electrical the product, be sure the antenna or cable system is shock or fire hazards. This product has been grounded so as to provide some protection against engineered and manufactured to assure your voltage surges and built-up static charges. Ar
ページ4に含まれる内容の要旨
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a • Do not place this product on an unstable cart, marked change in performance and you are unable stand, tripod, bracket or table. It may fall, causing to restore normal operation by following the detailed serious injury to a child or adult, and serious procedure in its operating instructions, do not damage to the product. attempt to service it yourself as opening or r
ページ5に含まれる内容の要旨
MAJOR FEATURES EN5 REMEMBER Digital Still Camera Built-in (PC communication capable) (Z pg. 22 – 25, 52 – 59) The Logical Choice Menu Adjustment (Z pg. 36, 37, 38) The only compact video cassettes that can be used with your VHS VCR* Integrated Auto Light (Z pg. 30) Program AE with Special Picture Stabilizer (Z pg. 29) Effects (Z pg. 32, 33) n Electronic Fog Filter n ND Effect n Sepia n Twilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Digital Hyper Zoom (Z pg. 28) LCD Color Monitor
ページ6に含まれる内容の要旨
QUICK OPERATION GUIDE (VIDEO) 6 EN The image you shoot is recorded onto a video tape. SUPPLY POWER INSERTING A VIDEO CASSETTE A Hook on. B Push in. PUSH Button EJECT Switch BATTERY RELEASE Using the battery pack 1 Open the LCD monitor to an angle of over 60 Hook its end to the camcorder ( ) and push the degrees. battery pack in until it locks in place ( ). 2 Slide EJECT to open the cassette holder. (Charging procedure, Z pg. 10) 3 Insert a video cassette. To remove the battery pack 4 Press PUSH
ページ7に含まれる内容の要旨
QUICK OPERATION GUIDE (D.S.C.) EN7 A still image you shoot is stored in the camcorder's built-in memory. SHOOTING SUPPLY POWER A Hook on. SNAPSHOT Button 4 B Push in. LENS COVER 1 Open/Close Ring Set to “AUTO” 3 or “PRO.” System Select Switch BATTERY RELEASE 2 Set to “D.S.C.” Using the battery pack Hook its end to the camcorder ( ) and push the battery pack in until it locks in place ( ). 1 Turn the LENS COVER Open/Close Ring to (Charging procedure, Z pg. 10) open the lens cover. To remove the b
ページ8に含まれる内容の要旨
CONTENTS 8 EN GETTING STARTED 10 – 17 Power.......................................................................................................... 10 Clock (Lithium) Battery Insertion/Removal .............................................................. 12 Date/Time Settings.......................................................................................... 13 Recording Mode Setting..................................................................................... 14 Tape Length Sett
ページ9に含まれる内容の要旨
EN9 USER MAINTENANCE 65 TROUBLESHOOTING 66 – 68 INDEX 69 – 73 Controls, Connectors And Indicators ...................................................................... 69 Indications..................................................................................................... 71 Terms .......................................................................................................... 72 CAUTIONS 74 – 76 SPECIFICATIONS 77 OPTIONAL ACCESSORIES 77 PROVIDED ACCESSORIES • AC Power Adapt
ページ10に含まれる内容の要旨
GETTING STARTED 10 EN Marks Power This camcorder’s 3-way power supply system lets you choose To AC outlet the most appropriate source of power. CHARGE indicator NOTES: c No function is available without power supply. c Use only the specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER 1 Connect the charger’s AC power cord to a wall outlet. REFRESH indicator ATTACH BATTERY PACK 2 Align the marks and slide the b
ページ11に含まれる内容の要旨
EN11 Charge Marker Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time. c Charging times noted on page 10 are
ページ12に含まれる内容の要旨
GETTING STARTED (cont.) 12 EN Slot Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.). REMOVE BATTERY HOLDER 2 Pull out the battery holder. Battery holder INSERT BATTERY IN HOLDER 3 Insert the battery in the holder, and be sure to have the “+” mark visible. RE-INSERT HOLDER 4 Slide the holde
ページ13に含まれる内容の要旨
EN13 Date/Time Settings SELECT OPERATION SYSTEM AND 1 MODE System Select Switch Set the System Select Switch to “VIDEO” or “D.S.C.” , and set the Power Switch to “PRO.”. •The power lamp comes on. ACCESS MENU SCREEN 2 Press MENU. SELECT FUNCTION MENU Button 3 Rotate the Select Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Menu Power lamp appears. •If you decide you want to return the date and time to the previous settings, rotate the Select Dial to move the highlight
ページ14に含まれる内容の要旨
GETTING STARTED (cont.) 14 EN Recording Mode Setting Set depending on your preference. System SET RECORDING MODE 1 Select Switch First set the System Select Switch to “VIDEO”, then set the Power Switch to “AUTO” or “PRO.”. Press SP/ EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the record- ing time. MENU Button NOTE: SP/EP Recording If the recording mode is
ページ15に含まれる内容の要旨
EN15 Cassette holder Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 60 degrees. OPEN CASSETTE HOLDER 2 Slide EJECT until the holder opens. Do not use force to open. INSERT/REMOVE CASSETTE 3 Make sure the label is facing outward. PUSH Button EJECT Switch CLOSE CASSETTE HOLDER 4 Press PUSH and make sure the holder is closed and locked. CLOSE LCD MONITOR 5 First make sure the holder is closed. Then close the LCD monitor. Turn to take NOTES: up slack. c Clos
ページ16に含まれる内容の要旨
GETTING STARTED (cont.) 16 EN Power Zoom Lever Grip Adjustment EXPAND LOOP 1 Separate the Velcro strip. INSERT HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment SELECT OPERATION MODE 3 3 1 Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). 2 2 POSITION VIEWFINDER 180 180° ° 2
ページ17に含まれる内容の要旨
EN17 Shoulder Strap Attachment ATTACH STRAP 1 Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back and 1 thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 4 3, making sure the strap is not twisted. 2 ADJUST LENGTH 2 Adjust as shown in the illustration at left 4. 3 Tripod Mounting ALIGN AND TIGHTEN 1 Align the screw and camera direction stud on the tripod with the camera’s mounting socke
ページ18に含まれる内容の要旨
VIDEO RECORDING Basic Recording 18 EN System Select Switch LENS COVER NOTE: Open/Close Ring You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 10) c Recording Mode Setting (Z pg. 14) c Tape Length Setting (Z pg. 14) c Grip Adjustment (Z pg. 16) c Viewfinder Adjustment (Z pg. 16) LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then insert the cassette with the label
ページ19に含まれる内容の要旨
EN19 Tape remaining time indicator STOP RECORDING 25MIN 4 MIN Press the Recording Start/Stop Button again to stop (Now calculating) recording. •The camcorder re-enters the Record-Standby mode. 120MIN NOTES: c When the Power Switch is set to CAMERA and the LCD 119MIN monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. 3MIN c The cassette holder cannot be opened unless a power supply is attached. 2MIN c There
ページ20に含まれる内容の要旨
VIDEO RECORDING Basic Recording (cont.) 20 EN Shooting While Watching The LCD Monitor Before the following steps, perform step 1 (Z pg. 18). 90° 180° ENTER RECORD–STANDBY MODE 2 Make sure the LCD monitor is fully open. Turn the LENS COVER Open/Close Ring to open the lens cover. Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). •The power lamp lights and the camcorder enters the Record-Standby mode. System Select Switch LENS COVER •The scene you
