ページ1に含まれる内容の要旨
GY-HD110/GY-HD111 HD CAMERA RECORDER
E
INTRODUCTION
CONTROLS,
INDICATORS AND
CONNECTORS
PREPARATIONS
PREPARATIONS
FOR OPERATION
SETTING AND
ADJUSTMENTS
BEFORE SHOOTING
SHOOTING
OPERATION
HD CAMERA RECORDER
PLAYBACK MODE
USING EXTERNAL
INSTRUCTIONS
COMPONENTS
GY-HD110
MENU SCREENS
GY-HD111
FEATURES OF THE
CAMERA SECTION
OTHERS
* The illustration shows the GY-HD110/GY-
HD111 HD CAMERA RECORDER with the pro-
Thank you for purchasing this JVC product. Before operating this
vided lens, viewfinder
ページ2に含まれる内容の要旨
Thank you for purchasing the JVC GY-HD110U/CHU, GY- ACCESSORIES HD110E/CHE and GY-HD111E/CHE HD CAMERA RECORDER. These instructions are for the GY-HD110U/CHU, GY- HD110E/CHE and GY-HD111E/CHE. The text mainly deals with the GY-HD110U/CHU and GY-HD111E/CHE. Explanations concerning unique GY-HD110U/CHU and GY- HD111E/CHE functions are set off by the (GY-HD110U/GY- HD111E only) notice. Information applicable only to the GY-HD110U/CHU is marked by “(U model only)”. Information applicable only to the
ページ3に含まれる内容の要旨
MAIN FEATURES • This camcorder records in HDV format or DV format. • Built-in monitor speaker for audio checking DV format can record and play back SD (Standard Defini- The input audio can be monitored in recording or EE mode. tion) video on Mini DV videocassettes. The playback sound can be monitored in the playback HDV format can record and play back HD (High Definition) mode. The speaker also outputs an alarm tone in case an or SD (Standard Definition) video on Mini DV videocas- abnormal condi
ページ4に含まれる内容の要旨
CONTENTS ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PREPARATIONS FOR OPERATION MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Turning the Power ON . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 • Turning the Power ON INTRODUCTION • Turning the Power OFF Precautions for Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . 6 Loading/Unloading the Cassette . . . . . . . . . . . . . . . . . . . . .36 Routine a
ページ5に含まれる内容の要旨
CONTENTS SHOOTING OPERATION FEATURES OF THE CAMERA SECTION Basic Recording Operation . . . . . . . . . . . . . . . . . . . . . . . . 50 How to Use Skin Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 • If the Record-Standby Mode Continues Outputting color bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 • Checking Recorded Contents in Record-Standby OTHERS Mode (Recording Check Function) HEADER REC Function . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ページ6に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 7IRIS mode switch ZOOM Lens A : Activates the auto iris feature. M : Allows manual iris control. Th16 x 5.5BRMU 8Momentary auto iris button When the IRIS mode switch 7 is at “M”, pushing this but- 3 2 1 ton activates the Auto Iris Function while it is held down only. 9[S] IRIS speed adjusting control For adjusting the iris operation speed. MEMO If the speed becomes too fast, hunting may occur. To avoid the phenomena described above, perform adjustment again. R
ページ7に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 6[ZEBRA] Zebra switch Front Section When this switch is ON, a zebra pattern is imposed on the viewfinder or LCD areas having luminance levels in accor- dance with the menu settings made for the video signal. 32 1 This pattern can be used as a reference for manual adjust- ment of the lens iris. Zebra patterns are also displayed dur- ing color bar display when this switch is set to ON. • The default value is 70% - 80%. The luminance level can be changed with the
ページ8に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 3Shoulder belt hooks Rear Section Allows you to attach a separately sold shoulder belt. 4LCD monitor Shows a color camera image or the VTR playback picture. It is also used for displaying the following: • Menu Setting screens 1 • Characters showing the whether the GY-HD110 is set to shooting mode or VTR playback mode 2 • Date and time and time code • Audio level meter 3 • Warning indications, etc. X See page 19. 5Tripod mount Use this hole when mounting the ca
ページ9に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 4[TC GENE.] Time code generator setting switch LCD Door Switch for setting the time code generator to preset mode or regeneration mode. It is also used to select the time code run mode when the preset mode is selected. FREE : The preset mode is selected, and the time code run mode becomes the FREE run mode. Set to this position to record with the time code or user’s bits set anew (preset). In this 1 5 setting, the time code always operates in the run mode. 2 *
ページ10に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 8[USER1/2/3] User buttons Right Side Section You can assign camera functions to the USER1 - 3 but- tons. Use them to switch shooting conditions depending upon 2 1 the subject. Set them using the USER1 - 3 items in the SWITCH MODE menu screen. X See page 71. 5 4 3 7 6 MEMO j i VF BRIGHT • The USER buttons work together with the menu settings. 8 • When a menu screen is being displayed, they also func- USER 1 USER 2 USER 3 9 tion as menu operation buttons. X S
ページ11に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS b[GAIN] Sensitivity selector switch f[REC] REC trigger button (start/stop recording) Electronically boosts the light sensitivity when there is Start and stop recording using this button. insufficient illumination on the subject. (This works together with the REC trigger button on the top The boosting level differs depending on the switch position and the lens VTR trigger button.) as follows: When “SPLIT” is set for the 1394 REC TRIGGER item on (Factory preset
ページ12に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 6Cassette cover Left Side Section Sliding the EJECT switch a on page 17 located on the top section opens this cover to allow insertion or removal of the videocassette. 2345 6 CAUTION 7 To prevent foreign objects from entering the internal parts of the VTR unit, do not leave the unit with the cover open for 8 extended periods of time. 9 7Viewfinder connector (6-pin) Connect the cable from the viewfinder here. 8[CH-2 INPUT] CH-2 audio input connector selector sw
ページ13に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 8[REC] REC trigger button (start/stop recording) Top Section Start and stop recording using this button. (This works together with the REC trigger button on the 56 right panel and the lens VTR trigger button.) 9[REC LOCK] REC LOCK switch Slide this switch in the direction of the arrow to lock the [REC] trigger button 8. Use this to prevent unwanted recording. (The REC trigger button on the right panel and the lens 7 VTR trigger button are not locked.) 8 0SD m
ページ14に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS CAUTION Top Section (Cont’d) When the power is turned on while the camera is in the FAS mode, it takes about 10 seconds before the automatic e[MONITOR SELECT] Audio monitor selector switch adjustment of FAS is completed. This switch is used to select the monitor sound output and All of the previous setting contents are recalled when the playback sound output from the monitoring speaker 1 on FAS mode is cancelled. page 14 or the PHONES jack 2 on page 12. i[STOP
ページ15に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS Indications on the LCD Monitor and in the Viewfinder In addition to showing the EE image and the playback picture, the LCD monitor and viewfinder are also used for the follow- ing character displays. To show characters on the LCD monitor, press the DISPLAY button briefly. Status screens (screens for checking the current cam- era settings) Auto white display (only displayed in the Camera DISPLAY button mode) Menu setting screens Alarm message display Safet
ページ16に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) Status Screens in the Camera Mode 1 0 266S DD 9 8 7 6 5 4 23 STATUS 0 Screen •STATUS 0 1 Event Indication When the Gain or Shutter Speed is changed manually, the setting condition is displayed for about 3 seconds at the time the change is made. Setting Status Contents of Indications Gain value was changed GAIN 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB Gain value reached the ALC GA
ページ17に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS No. Item Contents 2 VTR mode indication STBY : In record standby mode (record-pause mode) REC : During recording PLAY : During playback FF : During fast forward REW : During rewind STL : During still picture playback mode FWD : During playback in forward direction (FWD1: About ×2 speed, FWD2: About ×5 speed, FWD3: About ×10 speed) REV : During playback in reverse direction (REV1: About ×2 speed, REV2: About ×5 speed, REV3: About ×10 speed) STOP : Stop mode (Ta
ページ18に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) 12 3 7 0 4 9 86 5 STATUS 1 Screen •STATUS 1 In addition to the information on the STATUS 0 screen, this screen displays the following items. No. Item Contents 1 VIDEO FORMAT display Displays the currently selected video format. Allows you to select the REC item on the VIDEO FORMAT menu screen. X See page 64. You can switch this display ON/OFF using the FORMAT item on the LCD/VF [2/3] menu scree
ページ19に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS No. Item Contents 5 Audio sampling frequency in- 32 K : Indicated when the AUDIO MODE item on the AUDIO/MIC [1/2] menu screen is set to 32 K. (Au- dication dio is recorded with 12-bit, 32 kHz sampling.) 48 K : Indicated when the AUDIO MODE item on the AUDIO/MIC [1/2] menu screen is set to 48 K. (Au- dio is recorded with 16-bit, 48 kHz sampling.) X See page 72. 6 Audio level meter indication Displays the CH-1, CH-2 audio level meters. Whether or not to display
ページ20に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) STATUS 2 Screen STATUS 3 Screen •STATUS 2 This screen displays the camera setup statuses. Event display is not available while this screen is displayed. Indication Indication Contents FILE FILE F CAM1 [********], CAM2 [********], and EXT1 - 4 [********] * indicates SUB NAME X See page 83-85. A F symbol is displayed when a menu setting read from LOAD FILE was changed. The display disappears wh
