ページ1に含まれる内容の要旨
COMPACT VHS CAMCORDER
ENGLISH
GR-AX880
The Logical Choice
The only compact video
cassettes that can be
used with your VHS VCR*
Compact VHS
INSTRUCTIONS
LYT0087-001B EN
ページ2に含まれる内容の要旨
2 2 EN EN Dear Customer, Warning on lithium battery Thank you for purchasing the JVC Compact VHS The battery used in this device may present a camcorder. Before use, please read the safety fire or chemical burn hazard if mistreated. Do information and precautions contained in the not recharge, disassemble, heat above 100°C or following pages to ensure safe use of your new incinerate. camcorder. Replace the battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another
ページ3に含まれる内容の要旨
MAJOR FEATURES EN 3 Programme AE with Special Picture Stabiliser (Z pg. 17) Effects (Z pg. 22, 23) n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Effect n Sepia n Twilight n Sports Digital Hyper Zoom n Nega/Posi (Z pg. 16) n 1/2000 sec. High Speed Shutter Zoom-in Program Manager II (Z pg. 22 – 37) Programme AE with Special Effects, Zoom-out Fade/Wipe, Wide, Super LoLux, Instant Title, Menu Adjustment (Focus, Exposure Control and so on.) Random Assemble Editing (Z pg. 62 – 65)
ページ4に含まれる内容の要旨
CONTENTS 4 EN GETTING STARTED 6 Power ....................................................................................... 6 Clock (Lithium) Battery Insertion/Removal ............................................ 8 Date/Time Setting......................................................................... 9 Grip Adjustment ......................................................................... 10 Viewfinder Adjustment ................................................................. 10 Should
ページ5に含まれる内容の要旨
EN 5 TROUBLESHOOTING 69 INDEX 72 Controls ................................................................................... 72 Connectors ................................................................................ 72 Indicators ................................................................................. 72 Other Parts ............................................................................... 72 Viewfinder Indications ..............................................................
ページ6に含まれる内容の要旨
GETTING STARTED 6 EN Marks Power CHG. To AC outlet This camcorder’s 3-way power supply system lets you (charge) choose the most appropriate source of power. indicator NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER REFRESH indicator Connect the charger’s AC power cord to a wall 1 outlet. REFRESH ATTACH BATTERY PACK The AC power adapter fe
ページ7に含まれる内容の要旨
EN 7 CHARGE MARKER Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs. c Charging times noted on page 6 are for fully discharged battery pack, and dis
ページ8に含まれる内容の要旨
GETTING STARTED (cont.) 8 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensure that the plu
ページ9に含まれる内容の要旨
EN 9 Date/Time Setting ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar Select Dial 2 to “DATE/TIME”, then press it. The DATE/TIME Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial MENU to move highlight bar to “EXIT” and press it, then Jog Dial go to step 6. •
ページ10に含まれる内容の要旨
GETTING STARTED (cont.) 10 EN Power Zoom Button Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop Button and Power Zoom Button. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment POSITION VIEWFINDER 3 Adjust the viewfinder manually for best viewability 1 (see illustration to the left). SELECT M
ページ11に含まれる内容の要旨
EN 11 Shoulder Strap Attachment ATTACH STRAP 2 Following the illustration at left, thread the strap 3 1 through the top of the eyelet 1, then fold it back 2 1 and thread it through the keeper 2, and then through the buckle 3. Repeat the procedure to 1 attach the other end of the strap to the other eyelet 4, making sure the strap isn’t twisted. 4 ADJUST LENGTH Adjust as shown in the illustration at left 1, then 2 slide both keepers snug against the eyelets to prevent slipping 2. Tripod Mounting A
ページ12に含まれる内容の要旨
VIDEO GETTING STARTED (cont.) 12 EN Tape Length Setting Set the tape length according to the length of the tape System Select Switch used. ACCESS MENU SCREEN First set the System Select Switch to “VIDEO”, then 1 set the Power Switch to “CAMERA”. Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog◊ Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar 2 to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears. Select Dial MENU Jog Dial
ページ13に含まれる内容の要旨
EN 13 Loading/Unloading A Cassette OPEN CASSETTE HOLDER Slide EJECT until the holder opens. Do not use force 1 to open. 1 INSERT/REMOVE CASSETTE Make sure the label is facing outward. 3 2 2 CLOSE CASSETTE HOLDER Press PUSH and make sure the holder is closed and 3 locked. NOTES: c A cassette holder can’t be opened unless a power Turn to take supply is attached. up slack. c Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the Erase Protection
ページ14に含まれる内容の要旨
VIDEO RECORDING Basic Recording 14 EN NOTE: LENS COVER Switch You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 6) c Tape Length Setting (Z pg. 12) c Grip Adjustment (Z pg. 10) LOAD A CASSETTE Power indicator Slide EJECT to open the cassette holder, then insert 1 the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked. Power Switch ENTER RECORD-STANDBY MODE Start/Stop Button Slide the LENS COVER
ページ15に含まれる内容の要旨
EN 15 Tape remaining time indicator STOP RECORDING 25MIN MIN Press the Recording Start/Stop Button again to stop (Now calculating) 4 recording. •The camcorder re-enters the Record-Standby 60MIN mode. 59MIN NOTES: c A cassette holder can’t be opened unless a power supply is attached. 3MIN c There may be a delay after you slide EJECT until the holder opens. Do not use force. 2MIN c The displayed remaining time is approximate. (Blinking) c The time required to calculate the remaining tape length, a
ページ16に含まれる内容の要旨
VIDEO RECORDING Basic Features 16 EN FEATURE: Zooming Zoom-in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitly doubles the maximum 22x magnification offered by optical zoom. This system is called Digital Zoom. Zoom-out OPERATION: Zoom In Press the “T” of the Power Zoom Button. Zoom Out Zoom indicator bar Press “W” of the Power Zoom Button. n Zooming speed is available. A total of 4 zoom speeds are available. 2 speeds can be selec
ページ17に含まれる内容の要旨
EN 17 FEATURE: Quick Review PURPOSE: To check the end of the last P. STABILIZER recording. OPERATION: 1) Press “ ” and release quickly during the Record-Standby mode. n Tape is rewound for about 2 seconds and played back automatically, then pauses in RETAKE (R/F) Record-Standby mode for the next shot. NOTE: Distortion may occur at start of playback. This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record-Standby mode. 2) Pres
ページ18に含まれる内容の要旨
VIDEO RECORDING Basic Features (cont.) 18 EN DATE/TIME FEATURE: Date/Time/Character Insert PURPOSE: To display the date and time in the viewfinder or on a connected colour monitor, as well as to record them manually or automatically. OPERATION: 1) Turn the Select Dial to any position except AUTO LOCK. 2) Choose a display mode by pressing DATE/TIME repeatedly while in Record-Standby to cycle Display through the modes as shown in the Select Dial illustration to the left. n You should have alrea
ページ19に含まれる内容の要旨
EN 19 FEATURE: Video Light PURPOSE: To brighten the scene when natural lighting is too dim. OPERATION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the LIGHT OFF/AUTO/ON subject. OFF : Turns off the light. n The video light can only be used with the camcorder’s power on. n It is recommended to set the white balance (Z pg. 34) to HALO
ページ20に含まれる内容の要旨
VIDEO RECORDING Basic Features (cont.) 20 EN MODE Snapshot SNAPSHOT This interesting feature lets you record two types of digital still images that look like photographs onto a tape, as well as keeping them in the camcorder’s built-in memory. It is a great way to spice up footage of events such as parties, weddings and graduations. SELECT SNAPSHOT MODE Turn the Select Dial to any position except AUTO 1 LOCK, then press the MODE Button to switch from one mode to the other as shown in the illus
