ページ1に含まれる内容の要旨
Panasonic Broadcast
AK-HC900
Menu Information
ページ2に含まれる内容の要旨
Setting of Menu Items _ Configuration of menu display screen USER MENU Maintenance menu 1.MAINTENANCE MAINTENANCE 2.SETTING °° 3.CAM ID 1.BLACK SHADING 4.FILE MENU 2.PED,GAMMA,FLARE 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.COLOR CORRECTION1 12.COLOR CORRECTION2 USER MENU Using condition setting menu SETTING °° °° 1.MODE 2.SHUTTER 3.H.PHASE Camera ID setting menu CAM ID °° °° ID:AKHC9
ページ3に含まれる内容の要旨
Setting of Menu Items _ USER menu (Initial screen) USER MENU The readout data at start of power supply is the data just before cutting off the power 1.MAINTENANCE supply, and the operation is started with the 2.SETTING data. 3.CAM ID 1. MAINTENANCE 4.FILE MENU It sets various adjusting data. 2. SETTING It sets various modes. 3. CAM ID It sets the camera ID. 4. FILE MENU It executes file loading and saving, and makes the basic setting of data display. Menu operation is executed by the HD Cont
ページ4に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu MAINTENANCE ≥ Move the cursor (arrow mark) to the item °° to be adjusted and press the MENU key, 1.BLACK SHADING 2.PED,GAMMA,FLARE then it enters the adjustment menu there- 3.KNEE,WHITE CLIP under. 4.R/B GAIN ≥ Move the cursor to MAINTENANCE and 5.DTL 6.GAIN,AUTO IRIS press the MENU key, then it returns to 7.S.GAIN 1 USER MENU. 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.COLOR CORRECTION1 12.COLOR CORRECTION2 1 Black shading
ページ5に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu PED,GAMMA,FLARE 2 Pedestal, gamma, flare adjustment °° °° menu M PED :+027 M PED: Master pedestal can be adjusted R PED :+000 B PED :+000 only by turning the control panel VR. M GAMMA :0.45 The R, G, B pedestal can be totally ad- R GAMMA :+00 B GAMMA :+00 justed. R FLARE :010 R, B PED: R, B pedestal adjustment. G FLARE :
ページ6に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu KNEE,WHITE CLIP 3 Knee&white clip adjustment menu °° °° M KNEE POINT: Master knee point ad- M KNEE POINT :95.00% R KNEE POINT :+00.00% justment. B KNEE POINT :+00.00% G, B, R knee point can be totally adjusted. M KNEE SLOPE :95.00% R, B KNEE POINT: R, B knee point ad- R KNEE SLOPE :+000 B KNEE SLOPE :+000 justment. A.KNEE POINT :95.00% Besides the master knee point adjust-
ページ7に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu R/B GAIN 4 Gain adjustment menu °° °° The gain of R, B GAIN is adjusted. R GAIN :+000 B GAIN :+000 The difference from the state of being white-balanced can be adjusted. ≥ The numeral value displayed after nor- mal ending of AWB is “0” for both of R, B. DTL 5 Detail adjustment menu °° °° DTL: Setting of valid/invalid of detail func- DTL :ON TOTAL DTL LVL :+00 tion. H DTL LVL
ページ8に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu DTL 5 Detail adjustment menu (continued °° °° from previous page) DTL :ON TOTAL DTL LVL :+00 DTL (i): Setting of DTL at the edge in H DTL LVL :11 positive direction. CRISP :02 DTL (j): Setting of DTL at the edge in LVL DEPENDENT :2 PEEK FREQUENCY :10 negative direction. KNEE APERTURE :ON DTL CLIP: Setting of clip level of DTL KNEE APA.LVL :10 edge.
ページ9に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu S GAIN 1 7 Super gain, Detail, Pedestal-offset °° °° level setting menu TOTAL GAIN :62dB ° ANLG GAIN :36dB TOTAL GAIN: Total gain in analog, pixel PIX MIX :06dB addition, and memory addition is dis- V MIX :OdB played. FRAME MIX :20dB H DTL LVL :00 ANLG GAIN: Gain setting in analog. CRISP :0 PIX MIX: Gain setting in horizontal pixel LEVEL DEPEND
ページ10に含まれる内容の要旨
Setting of Menu Items ! Maintenance menu < COLOR CORRECTION1 > 9 Color correction 1 menu SAT PHASE Adjustment of gain (saturation) and phase R +00 +00 Mg +00 +00 of each color. B +00 +00 Cy +00 +00 G +00 +00 Y1 +00 +00 < COLOR CORRECTION2 > qZ Color correction 2 menu SAT PHASE Adjustment of gain and phase of matrix. R - Mg +00 +00 Mg - B +00 +00 B - Cy +00 +00 Cy - G
ページ11に含まれる内容の要旨
Setting of Menu Items @ Setting menu SETTING - Menu for various settings. °° °° 1.MODE 2.SHUTTER 3.H.PHASE MODE 1 Camera mode setting menu °° °° BLACK STRETCH: Setting of the func- BLACK STRETCH :OFF D5600K :OFF tion of expanding low-brightness analog ANLG OUTPUT SEL :YPbPr video level. CABLE COMPE :0m It is set by ON/OFF. SUP GAIN :OFF CAM ID :BAR D5600K: It is able to make color tempera- CAM ID P
ページ12に含まれる内容の要旨
Setting of Menu Items @ Setting menu SHUTTER 2 Electronic shutter setting menu °° °° SHUTTER MODE: It selects the shutter SHUTTER MODE :OFF SHUTTER SPEED :1/100 operation. ON/SYNCHRO/OFF can be SYNCHRO SCAN :75.1 selected. # ON Setting of normal discrete shutter speed. # SYNCHRO Setting of synchro scan mode. SHUTTER SPEED: Setting of normal shutter speed. SYNCHRO SCAN: Setting of synchro scan mode. Shutter speeds of 60 Hz to 120 Hz can be continuously change
ページ13に含まれる内容の要旨
Setting of Menu Items # Camera ID setting menu CAM ID °° °° ID:AKHC900 $ File managing and renewing menu H FILE MENU - File operation menu °° : blinking display. FILE :USER1 SAVE FILE? :USER1 1 The file selected by FILE is loaded. SAVE : It can be selected from [PRESET/ USER1 / USER2 /CURRENT]. When desired to return to the previ- ous data after loading other file, se- lect “CURRENT.” H FILE MENU °° FILE :USER1 SAVE
ページ14に含まれる内容の要旨
Setting of Menu Items $ File managing and renewing menu H FILE MENU - File operation menu (continued) ° 2 When saving the current data, two files FILE :USER1 SAVE FILE? :USER1 (USER1 /USER2) can be saved. SAVE : Select the file by “SAVE FILE?” Select “USER1” and move the cursor to SAVE and press the MENU key, then the item menu is displayed. 3 SAVE IN USER1. OK? “YES” and “NO” are displayed. Move the cursor from “NO” to “YES” and check that “
