ページ1に含まれる内容の要旨
Concerning Compact Discs Portable CD player
Only compact discs bearing this mark can be used with this unit.
Operating Instructions
However, continued use of irregular shape CDs can damage the unit.
Dear Customer
Thank you for purchasing this product.
SL-CT480
For optimum performance and safety,
please read these instructions care-
fully.
How to remove a disc from its case How to store the disc in its case
Label side up
How to hold a disc
Note:
If the surface is dirty
“EB” on the packaging indi
ページ2に含まれる内容の要旨
Power Supply Preparations Refer to the specifications (page 6) for information on operating times when using rechargeable batteries or dry cell batteries. When using LR03 (UM-4) batteries Charging procedure Using the AC adaptor 1 Insert the rechargeable batteries. 1 Insert the adaptor. (Refer to “Using the dry cell batteries”.) Connect the AC adaptor supplied. 2 Connect the AC adaptor. DC IN jack (DC IN 4.5 V K) (Refer to “Using the AC adaptor”.) Recharging starts and the “H” charging indicator
ページ3に含まれる内容の要旨
U S H P Basic Play Sequential Play VOLUME 4 5 Decrease Increase OPEN 1 OPR OFF 1 Label must face upward. Track number in play RANDOM ALL1 M C SORRY LIVES-XBSTRAIN VOL Elapsed playing time Close the lid. of each track Plug type: R L 3.5 mm stereo HOLD 2 3 Follow steps 1–5. Resume function In step 2: Connect the stereo earphones and the wired remote control to the headphone jack [Ë]. (Plug in firmly.) The player stores the track where you stopped play and In step 5: The volume range is 0-25. (Pre
ページ4に含まれる内容の要旨
Other Play Methods The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section. (See below.) ∫ If “'” is displayed Note! Skip play ∫ No more tracks can be programmed. ≥You can select the first track to play in random play ∫ To confirm the contents of the program and random repeat play by pressing [9] while the The disc plays from the specified track through to the ∫ Press [MEMORY/RECALL] while the disc is playing. disc is stopped. All the tracks are
ページ5に含まれる内容の要旨
Using the Wired Remote Control The remote control can be operated regardless of the How to use the wired remote control hold mode of the unit. Preparation: Press once during off or stop mode. Press once during play. Release the remote control from the HOLD mode. (Press [:] twice to skip to the be- ginning of the previous tracks.) Skipping Backward To start play tracks (Beep Beep Beep) (Beep) Press once during play. Forward Searching HOLD (Beep Beep) through tracks To stop play Press and hold dur
ページ6に含まれる内容の要旨
Troubleshooting Guide Specifications Audio Play time: Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on No. of channels: 2 (left and right, stereo) (When used in hold mode with EQ your part may eliminate the problem and restore proper operation. Frequency response: 20 to 20,000 Hz canceled, at 25 eC, on a flat, stable If you are in doubt about some of the check points, or if the rem
